dazig

hakStak

A magnet mount designed for the Honeycomb Storage Wall. For use with <a target="_blank" href="https://a.co/d/cSHvLqL" rel="nofollow noopener">60x13.5x5mm magnets</a>, <a target="_blank" href="https://a.co/d/44KHMmO" rel="nofollow noopener">M3 Flathead screws</a>, <a target="_blank" href="https://a.co/d/9WOwFM2" rel="nofollow noopener">and M3x4x5mm inserts</a>. I haven't tested, but the magnets are supposed to hold up to 70 lbs. They are very strong!!

HSW Magnet Mount

HSW Honeycomb Storage Wall

Lamics

The Watch Stand (EVERY WRIST SIZE)&nbsp;Perfect to display all your watches!I created this model since there was no model with different wrist size. The print profile has 3 different plates for 3 different wrist size: 16cm, 18cm, 20cm. No need to scale the model. Just pick the size you need!No AMS required, no Supports required, easy to print, lightweight (only 18 grams).&nbsp;

The Watch Stand (EVERY WRIST SIZE)

Watches

PrintGeggo

The head of Link from the game 'the legend of zelda - breath of the wild' for the great figure Dummy 13.The hair on the right and left is very delicate, which is why you shouldn't let it fall so often ;-)If you wish, I can also make a second version without the hair on the right and left of the face.&nbsp;I colored the face with acrylic marker, but you can also color the face in Bambu-Studio.-----------------------------------------------------Deutsch:Der Kopf von Link aus dem Spiel "the legend of zelda - breath of the wild" für die großartige Figur Dummy 13.Die Haare rechts und Links sind sehr filigran, weshalb ihr es nicht so oft fallen lassen solltet ;-) Wenn ihr es euch wünscht kann ich auch noch eine zweite Version machen ohne die Haare rechts und Links vom Gesicht.&nbsp;Ich habe das Gesicht mit Acrylmarker angemalt, aber ihr könnt das Gesicht auch in Bambu-Studio einfärben.&nbsp;&nbsp;

Dummy 13 - Links Head (the legend of zelda)

DUMMY 13

This is my version of a simple clamping board to help you close up 45 degree miter joints. You will need a pair of them as well as 3 clamps. The inspiration came form this video about a wooden version from wood whisper:&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=4tzRihagID4" rel="nofollow noopener">Cool Miter Clamping Trick - You&#39;ll Want to Make This! (youtube.com)</a>

Miter Joint Clamp board

Tools - Wood

KENPRINT

This is a Silica drier to utilise the Bambu reuseable high temperature rolls as a drying container that has 5 internal compartments &nbsp;Printed from BAMBULAB PA-GF (Nylon Glass fibre) to cope with the long term high temps involved 60C for 12 hours etc

Bambu silica drier 

Bambu Lab & 3D Printers General

BaGooN

This is a compact heat insert press that utilizes the affordable and readily available 150mm linear rail with MGN7H block. Instead of the adopted used return with a counterweight found in many designs, a printed spring takes its place, contributing to the reduction of parts count and simplification of assembly.&nbsp;Notes:<ul><li>The first step is to print test pieces to confirm compatibility with your soldering iron.</li><li>The spring is PETG, while the HolderArm, which comes in contact with the soldering iron, can be printed in PETG, ABS, or ASA. Other parts can be printed in PLA.</li><li>Springs should be printed with 100% fill rate.</li><li>I anticipate the use of soldering irons with a handle diameter of around 20mm. Please verify compatibility with your soldering iron using the test parts. Additionally, customization for your specific soldering iron can be achieved using the step file.</li><li>Precision relies on minimizing the play of the nut bar. Please start by printing Body.stl and then try Nutbar_Tolerance_Test to select the tolerance for printing the nut bar.</li><li>Special thanks to TheSnootch and Pluck3r!</li></ul>Required other than printed parts:  <figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/a85bfc04-623d-4d7d-af4c-10e6a6bd23b9.webp"></figure><ul><li>1x Soldering iron</li><li>1x 150mm rail with mgn7h block</li><li>7x M3x5x4mm heat-set Inserts </li><li>6x M2 nuts</li><li>10x M2x6mm screws</li><li>1x M3x6mm screw</li><li>4x M3x10mm screws</li><li>2x M3x12mm screws</li><li>3x zip ties</li></ul>Assembly:  0. Print a total of 6 parts ‘Body’, &#39;HolderArm&#39;, ‘NutBar’, ‘Top’ and 2x&#39;Spring&#39;.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/6fb76f40-7e38-4db4-9dff-67105dfb6c99.webp"></figure> 1. Installing M3x5x4mm heat-set Inserts on HolderArm at 4 points<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/b34a32e0-5a33-4cca-b2b1-8879d72a6f6d.webp"></figure> 2. Installing M3x5x4mm heat-set Inserts on Body at 3 points<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/622988ca-8ae3-456e-920b-548cf4fd27a4.webp"></figure> 3.  Installing M2 nuts on NutBar at 6points. Push the nut all the way in, otherwise the screw won&#39;t reach when installing the rail.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/ba52bad5-5bc3-4759-a707-7413cc95354c.webp"></figure> 4. Insert the NutBar into the body and secure the top part with M3x6mm screws.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/2309f20f-c6cd-40d1-9fb1-cc7bdebfac41.webp"></figure> 5. Secure the linear rail to the NutBar with M2x6mm screws at 6 points.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/a97e8850-24ca-4490-aa4d-3fab3939ed45.webp"></figure>  6. Secure the HolderArm to the linear guide block with M2x6mm screws at 4 points.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/ee26727d-711f-4417-a61b-fbc4e6d9575a.webp"></figure> 7. Attach two springs using M3x10mm screws, being careful not to tighten the screws too much. The springs need to have enough space to rotate freely. be careful not to remove the top part while the springs are attached, as the linear guide block pop out.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/873a125c-4cd6-405f-9cbf-410170eff1be.webp"></figure> 8. Secure the soldering iron to the holder using M3x12 screws.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/4cdfac51-4b17-4c04-bbae-c3dae09fc214.webp"></figure> 9. Hold the wire in place with zip ties at three points to prevent it from protruding out .<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/dc417f9c-e6f9-4a02-9f0b-575b3512605c.jpg"></figure>

Heat Insert Press

Tools - electronics

Snail

If you&#39;re like me, you&#39;ve had the pleasant experience of losing your car keys... while they&#39;re in the car!.. That&#39;s now solved.. at least for the Hyundai Sonata! Furthermore, the &#39;smart&#39; key&#39;s placement is important, my Sonata constantly needs the key to be closer to the sensor, so now it is.. no more non starts from &#39;key not detected&#39; :)This mounts in a snap with double sided tape, hot glue, etc. It is shaped to match the slope of the wall and still remain level.   This is a support free fast print.Post your make, please!!!!!! I love to see them!<h4> </h4><h3>Sell this print for $$? Please see my bio for my commercial printing license information. Thank you.</h3>&nbsp;

Hyundai Sonata Key Mount solves 'Key not detected'

Automobile

christofer.jh

Finally, no more placing the golf ball on the tee manually like a peasant! Load the machine with up to 12 golf balls, use the golf club on the pedal and watch the ball be presented for you.&nbsp;You need:  <ul><li>5x3mm bolts + nuts</li><li>One rubber band</li><li>Golf balls</li><li>Some old coins for weight (about 113g)</li></ul>Some parts need support when printing, my print profile handles that for you.<h3>Build instructions</h3>By popular demand, I have added a step-by-step build instruction.&nbsp;Fastener nails/pinsFor your convenience I have included some nails/pins. The tolerance for these are tight, If you find them to big you can do the following:<ol><li>Scale them down and reprint (just the nails/pins)</li><li>Cut away from the top/edge/flange</li><li>NOT USE THEM, 3mm bolts work even better.</li></ol>&nbsp;I added a small hole where a stopper (provided nail or bolt) can be added so that the pedal don't go to far.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/727487/2024-02-11_3409d39da46cf.png"></figure><h2>Assembly:</h2>Exploded view<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/727487/2024-03-16_81b6cbc2f63e7.png"></figure>&nbsp;&nbsp;Build video here:<figure class="media"><div data-oembed-url="https://youtu.be/LWar123I0ZU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LWar123I0ZU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Golf ball dispenser

Golf

acerqua1

LoZ Master Sword Plant Trellis100% prints at approx. 7in tall, 0.2in thick. To create a larger (or smaller) trellis you can scale in the x-y while keeping the z-scale the same (as to avoid making it too thick or thin. No support or adhesion needed.Pictured: Cookie CAD Black PLA, 20% infill.

LoZ Master Sword Plant Trellis

Plants

Miguel Piedrafita

When downloading the original model, I noticed it included a bunch of intersecting blocks all around, so I cleaned it up for printing.

New Nintendo 3DS XL Charging Stand [Fixed Model]

Video Games

1llia

<h2>Table mount/extender/clamp</h2>Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋️<h3>Printing settings ⚙️</h3><ul><li>Material: PETG / ABS / ASA</li><li>Layer high: 0.2 - 0.28 mm for the main body and 0.2 mm for the screw (included in my print profile)</li><li>Infill: at least 15% and honeycomb type</li><li>Walls: at least 3</li><li>Top/Bottom: also at least 3 layers</li></ul><h3>Feel free to modify my model based on your needs using Fusion 360 file 🛠️🔩⚙️ </h3>

Table mount - extender - clamp

Office / Desk

3D6 Designs

Made this for my friend who officiatedmy wedding. He loves TMNT so I gave a shot creating the iconic sewer grate logo. Just used some super glue to combine the two pieces.

TMNT Sewer Logo 

ninja turtles

EDDIEB3D_

.2 layer height needed for best resultsColors usedElegoo BlackSunlu Yellow

Suspended Batman Logo 

Figures and what not

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.