davidvitelle

Cute little mushroom man/woman/person.&nbsp;Lots of color changes so I suggest making a plate full of them to make it worth your while

Mushroom Man

stuff to leave around the store

cappyprints

Bring the whimsical charm of the forest into your home with our adorable Mushroom Pen & Toothpick Holder! This delightful piece features a cute mushroom perched on a log base, adding a touch of rustic elegance to your space. For best quality 10% infill, 0.1 layer height.

Forest Fungi Friend: Mushroom Pen/Toothpick Holder

gifts mushroom theme

Informalmarc

A free pen holder I made using the Helldivers model from HD2 and rigged up in Blender.

Helldivers 2 Pen Holder

pen stuff

Faran3D

This is an absolutely gorgeous high quality replica weapon which was ceated by Punished Props about 6 years ago, but it was a lot of work to print and paint and had issues with the handle fitment. I've remastered this to be a fully painted AMS print with a vertical extremely high quality print and a horizontal split print which halves the time by halving the model. I did some assembly where it suited and optimized each print for the best quality with the least amount of color changes.&nbsp;This was printed in eSun Red, Black, Cold White and a generic silver (eSun silver tends to be quite dull and basically grey).&nbsp;When I was done with the Thirst Zapper, I got to work remixing my nuka cola clock to create a wall mount for display. This is available in two versions to have the zapper pointing to either the left or right (named left or right accordingly). If you'd like to check out the clock you can find it here <a target="_blank" href="https://makerworld.com/en/models/79776" rel="nofollow noopener">https://makerworld.com/en/models/79776</a>&nbsp;Assembly instructions - The Horizontal (split) print will need to be dowelled and glued together - just use the photo for reference and you'll be fine. The only part which is a little tricky is the handle - be sure and use a minimal amount of glue and get these two pieces to connect with no gap and as perfect as possible. &nbsp;HANDLE ASSEMBLYTo attach the handle, you will need to insert it into the body trigger first, if the trigger isn't fitting into the hole . Push the trigger in as far forward and into the body as possible and the handle should be able to be positioned to almost fit into the hole. From there, apply pressure until it snaps into place. If you are unable to do this, find someone to help. &nbsp;I hope you love this as much as I do, and if you do, please like follow and give us a review!

Fallout Nuka Cola Thirst Zapper with Wall Mount

cosplay

Codyinbody3

Since my wall mount helmet display did so well, I decided to release my standing helmet display stand. This stand can be either as tall or as short as you need and each piece of the rod take a good amount of pressure to fit on but I tend to twist while pushing it on so that way it fits tight and snug. Once its put together it&#39;s solids and sturdy along with having a sleek and slim design to not look like a lot of those other bulky stands that are geared towards a certain genre with emblems or other identifying marking where you can only use the stand for certain helmets. Enjoy!

Helmet Display Stand (Variable/Adjustable Height)

cosplay tools

3Dennis

Appreciate the design? Consider supporting my work by <a target="_blank" href="https://makerworld.com/en/u/3694296089" rel="nofollow noopener">following my account</a> :) [Description by original designer]&nbsp;It's a big skeleton that is (for legal purposes) inspired by a Lego skeleton. If you want to know more about this project or see more pictures, check out my <a target="_blank" href="https://docs.juliaebert.com/projects/lego-skeleton/" rel="nofollow noopener">project documentation page</a>.This is also <a target="_blank" href="https://www.thingiverse.com/thing:5019502" rel="nofollow noopener">available on Thingiverse</a>.I was unsatisfied with existing Lego skeleton models online. There was a <a target="_blank" href="https://www.thingiverse.com/thing:3536767" rel="nofollow noopener">model on Thingiverse</a>, but it had a very low resolution STL (circles had 16 sides, for example), and it was originally designed for a 1:1 model. I found a couple of great models on GradCAD from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a>. These included the STEP and SLDPART files, so I could easily modify them and export with high enough resolution for printing.Lego minifigures are designed for injection molding, not 3D printing, so it's tricky to figure out how to break up the model to minimize the amount of support (and in turn, improve the surface finish of the parts). That's why there are so many parts to this print. I also tried to make sure parts could be printed in their strongest print orientation. Lastly, I had to adjust the tolerances of parts to make them snap together as big 3D printed pieces. I spent a lot of time prototyping this model, so I hope it works for you as well!This is designed to be printed at the size of the given STL files: 10x larger than a Lego minifigure. If you scale it up or down, I can't guarantee how the tolerances will hold up. If people are interested in other sizes, I can test the tolerances (and adjust the pin sizes) and make that available.If you want to make any changes of your own (including rescaling), <a target="_blank" href="https://cad.onshape.com/documents/0244ea1dd3a12456399aaaef/w/e0d1c4a865a9519d549edefe/e/475ea9aed0e3ba36a32a9902?renderMode=0&uiState=6172dec4a070904d88332843" rel="nofollow noopener">here are the design files in OnShape</a>. You will need an OnShape account, but there is a free hobby tier available.January 2022 update: There are now additional files that split up the torso into multiple pieces (with more pins!) so that it will fit on smaller printers like the Prusa Mini at 100% scale. See more below in the “Printing Notes” section. New files are in the “Split torso” folder.Printing NotesIf you're print using the 3MF files (recommended), you will need to print: (All supports are already configured here)<ul><li>2x arm.3mf</li><li>2x leg.3mf</li><li>2x body-torso-half.3mf</li><li>1x body-neck-4x-pelvis-shoulder.3mf</li><li>1x connector-pins.3mf</li><li>MMU head:<ul><li>1x head-mmu.3mf</li></ul></li><li>Head as separate pieces:<ul><li>1x head-skull-separate.3mf</li><li>1x head-face-separate.3mf</li></ul></li></ul>If you're printing directly with the STLs, you will need to print: (No supports required, except where noted)<ul><li>2x arm-upper-arm.stl</li><li>2x arm-lower-arm.stl</li><li>2x arm-hand.stl</li><li>2x leg-foot.stl (requires bed-only support)</li><li>2x leg-calf.stl</li><li>2x leg-thigh.stl</li><li>2x body-torso-half.stl</li><li>4x body-pelvis-shoulder.stl</li><li>1x body-neck.stl</li><li>50x connector-pin.stl</li><li>If you are printing the skull and face together with an MMU (or similar):<ul><li>1x head-skull-mmu.stl</li><li>1x head-face-mmu.stl</li></ul></li><li>If you are printing the skull and face separately (or not printing the face inset):<ul><li>1x head-skull-top-separate.stl (requires support everywhere)</li><li>1x head-skull-bottom-separate.stl (requires bed-only support)</li><li>1x head-right-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-left-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-nose-separate.stl (optional, requires bed-only support)</li><li>1x head-mouth-separate.stl (optional, requires bed-only support)</li></ul></li></ul>If you're printing on a smaller printer that can't fit the whole torso (this includes the Prusa Mini), there's an alternative version that splits the torso into two parts, connected by an additional 4 pins. Instead of printing body-torso-half.stl, print the files found in the “Split torso” folder below:<ul><li>2x body-torso-half-upper.stl</li><li>2x body-torso-half-lower.stl</li><li>4x connector-pin.stl (found in the main “STLs” folder)</li></ul>The biggest purpose of the pins is to align parts when you glue them together. For this to work, the pins need to press fit into their respective holes. Before printing all the pins, check that they press fit! If not, scale the width and height up or down as needed to fit the holes. Don't scale the length, or your pieces might not sit flush together.I recommend printing on a smooth bed. This will make for better seams when gluing together the body and arms.This is not a functional, structural part, so you can't get away with sparse print settings to save time and filament. I printed mine in PLA with 7% infill, 2 perimeters, and 0.2 mm layer height. The filament I used was scavenged from a dumpster.Assembly NotesIn general, there's only one way for pieces to fit together, so it should be fairly intuitive how to construct it. However, here's how all of the pins and pieces fit together, in CAD form: (Note that the pelvis and shoulder pieces on the body are identical/interchangeable.)<figure class="image image_resized" style="width:714.016px;"><img src="https://docs.juliaebert.com/assets/img/projects/lego-skeleton/assembled-skeleton-model.png" alt="Skeleton CAD with pins"></figure><ul><li>Here's my suggested assembly procedure:<ul><li>Start by test fitting together the parts with no glue, to check for any misalignment or loose/tight pins.</li><li>Glue all of the pins into one of the pieces you're fitting together.</li><li>Put super glue on the mating surface of the other part. No need to put it in the pin holes; the pins are for alignment, not strength, and if you put glue in them here, it can cure before you get the pieces fully together.</li><li>Line up the parts using the pins and carefully push the parts together. The thin layer of glue will cure very quickly, so there often isn't time for realignment!</li></ul></li><li>I recommend liquid super glue (as opposed to gel). When the pieces get very close together, capillary action will pull the glue to cover a larger area, and you'll get a better connection between the parts.</li><li>Assemble the legs first. These are the most forgiving parts (less precise alignment required to look good), so they're best for getting the hang of things.</li><li>The arms and legs are designed to snap onto the shoulder and hip pegs. Before attaching the shoulder and hip pegs to the body, check that you can snap on the arms and legs.<ul><li>If the arms/legs are too tight to snap on: Either (1) file/sand down the inside of the sockets until they fit on, or (2) slide the ams/legs on from the end of the pegs, then glue the pegs onto the body. The second option is easier, but make sure you don't use too much glue, or the arms/legs could end up glued in place instead of rotating freely. Also note that this option means you won't be able to take the arms and legs off.</li><li>If the arms/legs are too loose to hold their position: Add something to line the inside of the arm/leg sockets, like tape. This extra thickness should help hold them in place.</li></ul></li></ul>Model NotesAs mentioned above, this is based on GrabCAD models from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a> - and modified and shared here with their permission.In case you're curious about the corresponding Lego parts they're inspired by:<ul><li>Skull: #82359</li><li>Body: #60115</li><li>Leg: #6266</li><li>Arm: #59230 and #30377 (It's an amalgamation of these parts, not a part that actually exists; I took artistic license here to make something that looks nicer and is more functional.)</li></ul>To adjust the tolerances to make parts fit together, I always only adjusted the size of the outer piece. That means studs and pegs always retained their original size (48 mm for studs, 32 mm for pegs). So if you want to print any accessories for your skeleton (like a base, a hat, or something for it to hold), you can you these dimensions.

Mega Lego-like Skeleton (10:1 scale)

pegos

Darkwing

remix of existing model but with new base that allows for magnet to be put underneaththese small goblins really need a 0.2 nozzle or you will lose a lose a lot of the details.&nbsp;&nbsp;&nbsp;<figure class="table" style="width:98.39%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th style="background-color:hsl(120, 75%, 60%);border-style:solid;text-align:center;" colspan="3">My DnD miniatures</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/188800#profileId-231382" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-03-16_4d665844808b48.jpg"></a><figcaption>Character Pack 1</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/168509#profileId-185972" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-03-16_e9c136d2d34068.jpg"></a><figcaption>Character Pack 2</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/371953#profileId-271898" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-03-16_bd4fd52310095.jpg"></a><figcaption>Character Pack 3</figcaption></figure></td></tr><tr><td><figure class="image image_resized" style="width:78.79%;"><a href="https://makerworld.com/en/models/243075#profileId-259335" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-03-10_3554d3b30878f.png"></a><figcaption>Spiritual Weapons</figcaption></figure>&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/182742#profileId-201292" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-02-14_cd9489997013e8.jpg"></a><figcaption>Owlbear Cub</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/401307#profileId-302802" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-03-29_8e284434858cd8.jpg"></a><figcaption>Druid tribesman</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/151979#profileId-166046" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-29_42e12958751058.png"></a><figcaption>Fire Elemental</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/153634#profileId-167876" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-25_c7433ed7baa43.gif"></a><figcaption>Mimic</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/147207#profileId-160643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-21_ae1a3e233a56.jpg"></a><figcaption>Miniature storage</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/81029#profileId-95256" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-15_eb2aac9149b788.png"></a><figcaption>Warforged Artificer\Sorcerer</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/443798#profileId-349967" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-04-26_0a0e15408f3ea.jpg"></a><figcaption>Female Pirate with mimic treassure</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/166273#profileId-183344" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-02-14_b91202b4d00658.jpg"></a><figcaption>Kraken</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/119363#profileId-133078" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-15_182bc37d1f4cc.png"></a><figcaption>Human Militia</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/120872#profileId-142633" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-23_4ceab0a5a6a958.gif"></a><figcaption>Warforged fighter</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/147060" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-19_4d9fdb8600515.png"></a><figcaption>Elf Archer</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-15_c6d2753a8ff5f8.jpg"><figcaption>Ice Dragonborn</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/401316#profileId-302814" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-15_233d542c4ddf6.png"></a><figcaption>Owlbear</figcaption></figure></td><td><figure class="image image_resized" style="width:76.08%;"><a href="https://makerworld.com/en/models/119381#profileId-134535" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120982/design/2024-01-15_e31e623d6fa24.jpg"></a><figcaption>Paladin</figcaption></figure></td></tr><tr><td style="background-color:hsl(120, 75%, 60%);border-style:solid;text-align:center;" colspan="3"><h2><a target="_blank" href="https://makerworld.com/en/u/668400532" rel="nofollow noopener">All my models</a></h2></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Armoured Goblins

mini

PAPA Emeritus IV

I am making two profiles of this coaster. This coaster of Ghostface has a black base with the image on the top. In the picture you will see the print facing up to show the coloring, but in fact will be printed face down.

Ghostface Coaster with Black Bottom

coasters

Starbug,_Props

<div><h1>Summary</h1><div>Sooo ...After my first attempt that was modelled from drawings... i got some pics from a screen used helmet and built another... its quite different to the old version. There's a full construct for people to slice their own way but i've also cut it into 3 pieces . 206mm inside edge to edge. Again.. no texture or battle damage as fusion isnt really the tool for that. </div></div>

Uruk Hai Helmet V3

emeraldth88

<h3>High 'Til I Die Ghost - Full Colors - 3MF Bambu</h3>

High 'Til I Die Ghost - Full Colors - 3MF Bambu

ghost

hubuki

Cat licking paw 

minis

3D design shop

my flexible skeleton Lizard.&nbsp;It's a fun piece of toy that's incredibly flexible, with virtually all joints capable of movement. It has become a huge hit with the kids at home!&nbsp;If adhesion problems persist, I recommend adding a brim.

Articulated Skeleton Lizard

flexi

123cut

I would make some printable counters for you to put on your creatures.The symbols used are from MTG Arena and belong to Wizards of the Coast. These are not meant for sale.

MTG Keyword Counters Ability Magic the gathering Token

mtg tokens

sale

TripleGWorkshop

Start with White, then go Black, Green, Yellow, Blue, and Red last. 6 colors/ 5 changes total.You can use just 4 colors and stop and it will still look good, just all the flowers will be the same color. 2 color version → <a href="https://www.printables.com/model/328724-banksys-love-is-in-the-air-2-color-wfilament-chang" rel="nofollow">https://www.printables.com/model/328724-banksys-love-is-in-the-air-2-color-wfilament-chang</a>Banksy Collection: <a href="https://www.printables.com/social/336804-triple-g-workshop/collections/359901" rel="nofollow">https://www.printables.com/social/336804-triple-g-workshop/collections/359901</a>Link to all multicolor art: <a href="https://www.printables.com/social/336804-triple-g-workshop/collections/345687" rel="nofollow">https://www.printables.com/social/336804-triple-g-workshop/collections/345687</a>Quick Guide to changing filament~<ol><li>Have some paper to push away extruded filament. That's why I always set up the models on the left. </li><li>When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing this has given great, repeatable results.</li><li>Use a tool like this to help changes→ <a href="https://www.printables.com/model/329171-filament-change-tool" rel="nofollow">https://www.printables.com/model/329171-filament-change-tool</a></li><li>Have fun!</li></ol><figure class="image image_resized" style="width:713.993px;"><img src="https://makerworld.bblmw.com/makerworld/draft/123439/2023-10-27_vdk9g2mhu8i4.png"></figure>https://pestcontroloffice.com/use.asp

Banksy's Love is in the Air - 6 Color w/filament changes (1 at a time)

minecraft

Geekdomo

This is version 2.0 of the dice tower I remixed. Version 1 was nice but you could not drop more than 1 die at a time and even then they might get stuck in the throat. I am using the official Alien RPG dice. I took it into Meshmixer and totally redid the geometry of the neck and throat. Moved the lower jaw back so it would fit with the angled base.The dice just FLY out now, even a full handful. I added some ridges and angles in the throat to add a bit of randomness to the dice roll. Works AMAZING now! I have successfully printed this on SLA, FDM I recommend thin trees on Bambu Labs.

Alien RPG Dice Tower 2.0

dice tower

DCprint

Build-a-Tree Kit!Super easy to print, no supports needed. Work with or without multi color printing.&nbsp;Build your own Christmas Tree allows almost infinite configurations.&nbsp;Kit includes: Stand, Spacers, 9 different levels, Tree top, Star. 3 differents designs to mix: Regular + 2 differents ornaments to choose from.&nbsp;Fully compatible with scaling. I have provided 3 different size profiles: 100%, 150% and 200%I have also provided instructions, very easy. Everyone of all ages will love!&nbsp;<ul><li>nov 29th: added a version 125% size with less tolerance</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_52b77594b86168.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_a7d3eeec6598b8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_30777da30b433.png"></figure>&nbsp;

Build your own Christmas Tree  (no support needed)

xmas

3DPrintCraft

A funny sign that can be fixed to your workshop, work station, door etc. Printed on the X1C using 3 colours, facedown print on the Textured plate.

Funny Workshop Sign

sign stuff

dierk24

<ul><li>Fülldichte 15%</li><li>1. Schicht 50 mm/sec.</li><li>Füllung der 1. Schicht 80mm/sec.</li><li>Stützen Baum mit 30 Schellenwinkel</li><li>Randtyp nur Äussere</li><li>Revopoint Range 3D Scanner</li></ul>

Spartaner (Gipsfigur)

statue

Keebitzenny

Everyone, please give a warm welcome to Louis! He's ecstatic to meet you and wanted to let you know the love you seek has been inside you all along!&nbsp;Included is Louis, his backplate, and also a scalable version without the magnet holes so that you can print a desk-sized buddy if that's what you prefer.&nbsp;What you'll need:<ul><li>x1 Printer</li><li>x8 6.4x1.6mm Rare Earth Disc Magnets (I got mine here): <a target="_blank" href="https://www.homedepot.com/p/Magcraft-Rare-Earth-1-4-in-x-1-16-in-Disc-Magnet-80-Pack-NSN0657/204721317" rel="nofollow noopener">https://www.homedepot.com/p/Magcraft-Rare-Earth-1-4-in-x-1-16-in-Disc-Magnet-80-Pack-NSN0657/204721317</a></li></ul>Please, if you decide to create a Louis as an addition to your life, post pictures! &nbsp;Printing tip: Print Louis with magnet holes facing toward the build plate and with supports!