Davids Designs

Speedy06

I created a dishwand holder. It is meant to sit on the edge of the sink so that water from the dishwand will fall back into the sink. It is design to hold all different kinds of dishwands. It designed so that dishwand will never be sitting in water and everything will drain of of it. Additional, I have added small diamond shaped features on the surface that the dishwand sits. This help whatever dishwand that is put it for moving/sliding around. &nbsp;In the print profile I have uploaded. There are 2 sheets. Each sheet has the same model. Sheet 1, the model prints from the back forward, its the fastest print time with the least amount of material and no supports needed. I have printed a few of them and every once in a while a edge lifts up. So I added Sheet 2, it prints from bottom to top, it takes longer, more material and has supports but the model wont lift. I just wanted to give options for you.&nbsp;Dimension: 165mm (height) x 100mm (width) x 80mm (depth)&nbsp;Printer: X1C Filament: NuMaker PLA+.20 Standard Bambu profile Please leave a review (good or bad). Let me know what you liked or something you would like changed.

Dishwand Holder

Cleaning

IanCantDraw

Longer versions of the Push-Fit Hooks from Keep Making's <a target="_blank" href="https://www.multiboard.io/" rel="nofollow noopener">Multiboard</a>.&nbsp;The <a target="_blank" href="https://www.multiboard.io/parts-library/accessories" rel="nofollow noopener">originals </a>come in 15, 20, and 25mm lengths.I've made 50, 75, and 100mm versions of the 17.5mm hook.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/452879/2024-01-25_ff96334f64e4d.png"></figure>&nbsp;All credit goes to Jonathan at <a target="_blank" href="https://www.youtube.com/@Keep-Making" rel="nofollow noopener">Keep Making</a>.

Multiboard - Longer Push-Fit Hooks (50 - 100mm)

Multigrid

moose_

Mini Networking / Server / PC 10 inch wide rack.&nbsp;&nbsp;TP-Link Omada:OC200 Cloud ControllerER605 RouterSG2210P PoE Switch / SG2008 non PoE Switch &nbsp;Dell OptiPlex 3080 Micro10" Shelf10" Blank Plate&nbsp;&nbsp;<a target="_blank" href="https://a.co/d/hnANjQE" rel="nofollow noopener">10u Rack Rails</a><a target="_blank" href="https://a.co/d/2FsYruM" rel="nofollow noopener">12 Port Patch Panel</a><a target="_blank" href="https://makerworld.com/en/models/14665#profileId-15253" rel="nofollow noopener">Ethernet Port Cap/Cover</a>Rack was built with 2x2 lumber and painted.&nbsp;&nbsp;PC:<a target="_blank" href="https://www.aliexpress.us/item/2251832703612084.html?spm=a2g0o.order_list.order_list_main.15.29fa1802XGW3P3&gatewayAdapt=glo2usa" rel="nofollow noopener">ITX02 PC Test Bench Open Frame</a>10mm Anti Vandal Switch<a target="_blank" href="https://a.co/d/hrMimg1" rel="nofollow noopener">2 Port USB A Front Panel</a><a target="_blank" href="https://a.co/d/49AxPGa" rel="nofollow noopener">1 Port USB C Front Panel</a>&nbsp;

10" Mini Network / Server Rack

Rack

AMT_MW

<h2>What it is</h2>A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster.<h2>What to print</h2>There are multiple variants awaiting you:&nbsp;<figure class="table"><table><tbody><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:90.12%;"><img src="https://media.printables.com/media/prints/324084/rich_content/901ce4eb-1fb2-4e83-a7e9-851982f2de49/ksr242872175119ed.jpg#%7B%22uuid%22%3A%22ee2060c5-f3b2-4781-9d19-d87c927fc653%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Central gauge version 1<ul><li>measures from 1 to 10 mm in 0.5 mm increments</li><li>ring gauges for round stock, drills, … from 1 to 10 mm in 1 mm increments, clearance designed is 0.1 mm</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:90.13%;"><img src="https://media.printables.com/media/prints/324084/rich_content/86ecd8de-2fbb-437e-8c6f-7b2f6c5f54e8/ksr242872175120.jpg#%7B%22uuid%22%3A%22354559fb-5b03-493f-9644-028e3be39ef3%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Central gauge version 2<ul><li>measures from 1 to 10 mm in 0.5 mm increments</li><li>central hole (35mm)</li><li>digits running cw/ccw like on the embracing gauge</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:90.13%;"><img src="https://media.printables.com/media/prints/324084/rich_content/05241ff3-36b9-4880-90e4-0919d4b68f5e/ksr242872175121.jpg#%7B%22uuid%22%3A%22aa58f950-82cf-422c-b575-984b360cb213%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Central gauge version 3<ul><li>measures from 1 to 10 mm in 0.5 mm increments</li><li>central hole (26mm)</li><li>bigger depressed digits & coloured edges</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:100%;"><img src="https://media.printables.com/media/prints/324084/rich_content/a6e57f7d-63ba-46d0-ac6b-60ff4d0ca2dc/ksr242872175123.jpg#%7B%22uuid%22%3A%22095864bf-83e5-40b4-b4cb-37ed88e157d2%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Embracing gauge version 1<ul><li>measures from 11 to 20 mm diameter in 1 mm increments</li><li>15° angular scale</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:100%;"><img src="https://media.printables.com/media/prints/324084/rich_content/a5a065f7-400b-411c-8f64-bb2cfe2902f7/ksr242872175122.jpg#%7B%22uuid%22%3A%223d84a8fc-e599-45f5-af42-939608d3e4ea%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Embracing gauge version 2<ul><li>measures from 11 to 20 mm diameter in 1 mm increments</li><li>15° angular scale</li><li>huge depressed digits & coloured edges</li><li>snap fit with central gauges</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:100%;"><img src="https://media.printables.com/media/prints/324084/rich_content/683feaf7-af46-453d-b4af-11e79a8e04f9/ref_david_01.jpg#%7B%22uuid%22%3A%226b62b2f7-29e5-4917-a06c-5b36f97d45d5%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure></td><td style="height:150px;width:600px;"><ul><li>Recommendable remixes<ul><li>If you want this design expanded to measure up to 40mm (or as coaster for a beer-keg?) <a target="_blank" href="https://makerworld.com/en/u/1237497475" rel="nofollow noopener">DavidsGotWood</a> got you covered <a target="_blank" href="https://makerworld.com/en/models/19260#profileId-35500" rel="nofollow noopener">here</a> with a next size up embracing gauge.</li></ul></li></ul></td></tr><tr><td style="height:150px;text-align:center;width:200px;"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/99517/2023-10-07_d03903fd700f9.jpg"></figure></td><td style="height:150px;width:600px;"><ul><li>Stand alone variants<ul><li>5mm thick</li><li>no nesting but great to fidget with</li><li>available <a target="_blank" href="https://makerworld.com/en/models/28772#profileId-25142" rel="nofollow noopener">here</a></li></ul></li></ul></td></tr></tbody></table></figure><h2>How to print</h2>Recommended for printing is a 0.4 mm nozzle and 0.2 mm layer height. Printing with a 0.6mm nozzle and Arachne activated is possible, as can be seen in the pictures above.A multi color version is just a matter of simple filament changes between layers. The digits on top differ in height by 0.2 mm which lets you print them in two colors. → The here orange depicted digits read the adjacent bulge diameter and are 0.2mm higher than the white ones, which read the adjacent inside curvature.Material at one's discretion, I used PETG in four different colors.<h3>What next</h3>There may be improvements and modifications based on feedback given here.If you prefer a smaller tool for the same task, my <a target="_blank" href="https://makerworld.com/en/models/36869#profileId-35176" rel="nofollow noopener">Diameter Worm</a> may be a good choice.Measuring instead of gauging angles can be done with my printable <a target="_blank" href="https://makerworld.com/en/models/36055#profileId-33871" rel="nofollow noopener">Vernier bevel protractor</a>.<h3>Mentions</h3>Credits to Archimedes of Syracuse, who absolutely died for circles and Carl Friedrich Gauß.

Fillet diameter radius gauge | Workshop Coaster

Tools

xonggg

Simple mould with rounded corners to cast a base slab for your 3D printers. &nbsp;Do note that for best effect, a layer of foam/rubber is required to act as the dampener.&nbsp;Intructions:<ol><li>Print 4 pieces of “Concrete_Mould_Piece.STEP" - Each takes ~100g of filament.</li><li>Assemble them together and tape them together at the bottom</li><li>OPTIONAL - seal the gaps and seams with silicone</li><li>Apply mould release if you want to have a chance at reusing your moulds</li><li>Pour cement and lay fibre reinforcement</li><li>Wait for it to cure and remove concrete slab</li></ol>

Concrete Slab Mould - Vibration/Sound Dampening Base for 3D printers

Outdoor

Brandon Raineri

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/qa9TORed2LU?feature=shared"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=qa9TORed2LU"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/qa9TORed2LU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><h3>VERSION 2.1 UPDATE (05/05/2021)</h3><ul><li>Added STL specific file for Subaru or Mazda Filter: 15208AA100 or N3R1 14 302</li><li>Added STL specific file for Subaru Filter: 15208AA12A</li></ul><h3>VERSION 2 UPDATE (03/28/2021)</h3><ul><li>Adjusted STL Z orientation</li><li>Adjusted flats for tighter fit</li><li>Added threads for use as funnel in oil fill tube</li><li>Reduced height to reduce print time</li><li>I tried to incorporate square opening to use with ratchet was unsuccessful. Too loose of a press fit and the funnel just slips on the filter flats. Too tight and the material at the flats begins to crack.</li></ul><h3>Background</h3>This is a no mess oil filter funnel to be using during normal maintenance oil changes on the Subaru EJ series motor. I was tired of getting covered in oil when removing the oil filter on my STI due to it being the vertical orientation.<h3>Print Settings</h3><ul><li>0.2mm layer height</li><li>100% Infill</li></ul><h3>Operation Instructions</h3><ol><li>First break the oil filter loose. You may be able to slip the funnel over to gain more leverage but really if the oil filter was hand tight during the last change, it should break free without a significant amount of force.</li><li>Push funnel up onto the oil filter and loosen until oil begins to drain. Ensure a container to catch the excess oil is placed under the funnel exit. The design is to "press-fit" over the oil filter so it will stay in place while the excess oil drains.</li><li>Once the oil has stopped draining, completely unscrew the oil filter and remove.</li><li>Clean excess oil off funnel and thread into oil fill tube to use as a funnel when filling with new oil.</li><li>Enjoy no mess!</li></ol>

Subaru EJ Low Mess Oil Filter Funnel

Automotive

FlorinV

Great desk accessory, to look at, to play with(easy to spin) and to use.&nbsp;Update 27.01.2024: Increase the filament infill and walls of the arm (to better hold it&#39;s shape in time, as the magnetic force tries to deform it). Changed one of the screws to be a shorter version, in case your magnets are too strong and need a shorter one to fit.Update 31.01.2024: Added another pen model (Hexagonal style). There is a new profile for this one. Enjoy !&nbsp;Features:<ul><li>Parts needed: 3 magnets with size 10x2mm. Probably you can use smaller magnets also, but you would have to add maybe one more magnet to the support arm. You need to play with it. Also 8x2mm magnets should be fine, but this is not tested by me (someone else tried).</li><li>No AMS needed to print it multicolor.</li><li>Two different pen designs to choose from. You can use them without support and magnets, if you want.</li><li>The pen design included in the main profile, is the stronger one, clean and with a special cutout that can be used to check the level of ink in your reserve.</li><li>The optional pen design is using a thin insert to make the pen multicolored without using AMS or wasting a lot of filament and time.</li><li>Optional tag caps to attach to the support arm. You can add one character to each cap and form a gamer tag, a name, an abbreviation etc. Or add some color pattern, whatever you like.</li><li>Designed for Pilot reserves ( 0.7mm), but can work with any pen reserve as long as you cut it at 122mm length. Just search with google something similar with: Pilot FriXion Pen Refills, 0.7 mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/388de27a-0257-4f7d-870e-8d9665c7c1de.jpg"></figure><ul><li>If you use Pilot reserve, you have to use the little spacer as displayed in assembly pictures or video.</li><li>If you choose to use another type of pen reserve, just cut it at 122 mm length and don&#39;t use the spacer anymore. Tested with simple pen reserve like the one bellow, and it works also. Just cut it to 122mm length and don&#39;t add the little spacer provided for Pilot reserves.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_8d03559413d1e.png"></figure>Assembly guide:<ul><li>Please check the video at the end with full setup and please use subtitles, as I&#39;ve added some useful information while assembling it.</li></ul>Pen:<ul><li>Please remove carefully the brim from the body of the pen after printing it. Usually if the bed sticks good, when you pull the body pen, the brim with separate easily. I&#39;ve setup a small gap between pen and brim, to be sure it sticks well, as it&#39;s a tall and narrow part.</li><li>Attention! Before gluing the magnet cap to the pen, be sure the magnet is facing the right direction to be attracted by the magnets on the support.  Carefully glue the magnet cap, to not get glue everywhere.</li><li>Please check bellow all the parts of the pen and how they are connected.</li></ul><figure class="image image_resized" style="width: 71.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_6cf57802c8d71.jpg"></figure>Support:<ul><li>Carefully remove the supports from the base part.</li><li>Insert the arm into the base and screw in the provided screw. There are 2 versions of the screw in the profile, one longer and one shorter. Depending on your magnets power, use the one that works better for you.</li><li>Be sure you screw it in enough so that the base can lay flat on the table. Change the screw with the shorter version if you need to.</li><li>Add two magnets (10x2mm) on the top hole of the arm. Before gluing them, be sure they are aligned with the magnet from the pen, so that they attract each other!</li><li>After everything is setup, you can use the bottom screw to fine tune the distance between pen magnet and support arm magnets, so that it holds the pen good, but don&#39;t pull up the pen from the base.</li></ul><figure class="image image_resized" style="width: 78.12%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-01-19_ff9970461619c.jpg"></figure><figure class="media"></figure>&nbsp;Step by step on how to customize the letter caps:<ul><li>you open the &#34;8 blank caps to customize&#34; into Bambu studio, </li><li>select one of the caps objects, </li><li>click on the TEXT icon -add one letter into the &#34;Input Text&#34; field </li><li>move your mouse cursor over the cap and click when you center it </li><li>you can move it around again by selecting the &#34;text_shape&#34; object later under the &#34;button.stl&#34; object </li><li>Repeat for each letter you want. (you have 8 caps into the profile, but you can clone them to have more if you want)  </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000146589/design/2024-03-18_a5b871a5e0d65.png"></figure>

Magnetic Levitating Holder & 3 pen models

For Fun

PrintForFunAndFunction

Clip to hold bags in place on Rubbermaid 32 Gallon garbage cans.

Rubbermaid 32gal Garbage / Trash Bag Clip

Organization

MKE Prints

Some quick to print tool box labels. Intended to use with 6x2mm round magnets (press fit).Or double sided tape, whatever works for you!

Tool Box Labels

Tool Organization

copehill077

This contains Settlers of Catan &amp; Settlers of Catan: 5-6 Player Expansion.&nbsp;<h2>ANNOUNCEMENT: NEWLY RELEASED <a target="_blank" href="https://makerworld.com/en/models/376481#profileId-276457" rel="nofollow noopener">CATAN ORGANIZER TRAYS</a>!! <a target="_blank" href="https://makerworld.com/en/models/201626#profileId-222020" rel="nofollow noopener">COMPLETE EDITION</a> MODELS ARE OUT, SEE LINKS BELOW. </h2>&nbsp;This is a remix of the 3D Settlers of Catan by Dakanzla (<a target="_blank" href="https://www.thingiverse.com/thing:2525047" rel="nofollow noopener">catan-style boardgame 2.0 (magnetic &amp; multicolor)</a>) made so you can now have up to 6 players play! This contains the same filament colors as Ty Robbins&#39; <a target="_blank" href="https://makerworld.com/en/models/93623#profileId-100388" rel="nofollow noopener">Settlers 3D</a>. I used the same coloring for filament colors as them. I remixed the parts to make it so people can create the Settlers of Catan AND the 5-6 Player Expansion all in one project without printing any plates again, which would waste filament.&nbsp;Tips for printing &amp; assembly:<ul><li>If you want to add magnets to the bases, I used 2 boxes of these <a target="_blank" href="https://www.amazon.com/dp/B092MCQ3NL?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">3x3mm neodymium magnets </a>and inserted 2 into each slot, while pressing it in with a cover. This <a target="_blank" href="https://youtu.be/xtjiwE4k6zA?si=Ch8pZ6jMUZUcuKVU&amp;t=644" rel="nofollow noopener">assembly video</a> may help with this process.</li><li>To get the most detail out of the model, turn on variable layer height for some models, especially the Water Landscape &amp; Harbor Water Landscape.</li><li>To waste less filament, turn on purge into infill, and consider purge into object to create unique colors of cities, settlements, ships, tiles, etc.</li></ul>This contains Settlers of Catan &amp; Settlers of Catan: 5-6 Player Expansion. If you haven&#39;t printed anything yet and want to play Catan with 5-6 people, print this. For a full table of the Catan editions and expansions, refer to the table below:&nbsp;Catan Editions Included in this Model<figure class="table" style="width:627.547px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Board Game Name</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Includes</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Prerequisites</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">X</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: 5-6 Player Expansion</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">X</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: Seafarers</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">Settlers of Catan: Seafarers 5-6 Player Expansion</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> </td></tr></tbody></table></figure>If you want to print out any other permutation of Catan, here are the links:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/201626#profileId-222020" rel="nofollow noopener">Settlers of Catan Complete Edition (Settlers of Catan, Settlers of Catan: 5-6 Player Expansion, Seafarers, Seafarers: 5-6 Player Expansion)</a><a target="_blank" href="https://makerworld.com/en/models/179323#profileId-197226" rel="nofollow noopener">Settlers of Catan: Base Game &amp; 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/179353#profileId-197251" rel="nofollow noopener">Settlers of Catan: 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/201615#profileId-222013" rel="nofollow noopener">Settlers of Catan: Seafarers</a><a target="_blank" href="https://makerworld.com/en/models/201612#profileId-222010" rel="nofollow noopener">Settlers of Catan: Seafarers 5-6 Player Expansion</a><a target="_blank" href="https://makerworld.com/en/models/201644#profileId-222037" rel="nofollow noopener">Settlers of Catan: Seafarers &amp; Seafarers 5-6 Player Expansion</a>&nbsp;Filaments Used in Photos:Bambulab PLA Matte Matte Desert TanBambulab PLA Basic RedBambulab PLA Basic OrangeBambulab PLA Basic GreenBambulab PLA Basic Bambu GreenPolyterra PLA Savannah YellowMonoprice PLA+ Light BlueMonoprice PLA Hi-Gloss Blue GreenMonoprice PLA Hi-Gloss GrayInland PLA+ PurpleInland PLA+ WhiteElegoo PLA Black(Monoprice filament may be hard to find)&nbsp;Disclaimer: Dragon robber not included in .3mf. Here is the link: <a target="_blank" href="https://makerworld.com/en/models/59435#profileId-63033" rel="nofollow noopener">https://makerworld.com/en/models/59435#profileId-63033</a>&nbsp;Looking for a cheap, efficient storage solution to hold all of the tiles and pieces? Check out my <a target="_blank" href="https://makerworld.com/en/models/376481#profileId-276457" rel="nofollow noopener">3D Catan Organizer Trays!</a> If you want to save filament, check out the <a target="_blank" href="https://makerworld.com/en/models/376608#profileId-276603" rel="nofollow noopener">Lite Version - 3D Catan Organizer Trays!</a><figure class="image image_resized" style="width:40.24%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179323/design/2024-03-22_4b00535817494.gif"></figure><figure class="image image_resized" style="width:52.92%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179323/design/2024-03-22_11af61d1f8961.gif"></figure>

Settlers of Catan:Base Game & 5-6 Player Expansion

Games

KobaRiley

<h2>Cable Tidy for Bambu X & P Series</h2>Got a bit tired of the messy setup on the back of the printer, and designed some cable supports that don't need screws or magnets.Also got a bit carried away and designed a few different versions.&nbsp;The PTFE tube on the right side, that goes to the printer, is free to move back and forth, but stays in the channel.The cables and tubes keep everything in place, but I've added some double sided tape on mine to keep it a bit tidier.<h3>Install</h3>To install the plate, you need to remove the two cables, and the left hand side PTFE tube. Then, remove the PTFE tube at the connector closest to the printer… feed that tube through the hole in the cable tidy plate, and then just reconnect everything.&nbsp;I've had this running on two printers for about 20 prints each, and have had no issues.&nbsp;There are different designs available, from 4, 3, 2 and 1 colour. The 1 colour basic version is by far the fastest to print… The Texas version is my favourite, and looks much better in reality than my awful photos….&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_432ca9585a8cb.jpg">&nbsp;&nbsp;The cables and tubes can still be removed with the standard little tools that are everywhere on Makerworld, but I've included a couple that fit slightly better with with this plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_6a6ab2a212209.png"></figure>&nbsp;This project took several days, and many many test prints. If you like the model, and feel like buying me a coffee, it would be greatly appreciated. <a target="_blank" href="https://ko-fi.com/kobariley" rel="nofollow noopener">https://ko-fi.com/kobariley</a>&nbsp;