davidgwalker4321

dfreshkremer

The American flag! You will need a multicolor printer for this model. The cover photo shows Old Glory printed at 200%. I would not scale it any (or much) smaller, because then the stars may not print well. If you are going to increase the scale, I would decrease the amount of walls in the print profile, so it doesnt print solid - to save some filament. Enjoy!&nbsp;If you would like a merchant license to sell this model/print, please private message me. Thanks!Or send me a tip! Venmo: @dfreshkremer (0818)&nbsp;

The American Flag

July 4th

Stag 3D

<h2>Flower Decor</h2>Brighten up your home with this beautiful flower decoration. Colour the petals to match your decor. No supports required and simple assembly. The flower can be laid flat or wall hung. Tip: Scale down in Bambu Studio to create different sizes for a display. Assembly: Once all parts are printed, take the base and insert the supports labelled A into the small slot and then the supports labelled B into the larger slot. You then simply alternate A and then B around the base. Use superglue to ensure a nice secure fit. Once the base is ready, push fit the petals into place one by one until the flower is complete.

Flower Decor

plants

OJum

Easy assembly with my youtube video: The deagle in several parts was made to add an elastic for have the functional slide head.And on it you can add optic if you want but you don&#39;t have to glue the front sight.Except for this one you have to glue all the little parts.<figure class="media"><oembed url="https://www.youtube.com/watch?v=fid__ly3hdw&amp;t=21s"></oembed></figure>&nbsp;&nbsp;

desert eagle

guns 

agepbiz

<figure class="media"><oembed url="https://www.youtube.com/watch?v=6RgBXBwwXBg"></oembed></figure>&nbsp;edit: 04.03.24 added accessories - canvas top (separate print, no support needed)&nbsp;Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version. I wanted to do a project where I used several tools and machines to tie it all together into one project&nbsp;The Jeep Kit Card: <a target="_blank" href="https://makerworld.com/en/models/223303#profileId-241285" rel="nofollow noopener">https://makerworld.com/en/models/223303</a> The Trailer: <a target="_blank" href="https://makerworld.com/en/models/428258#profileId-332362" rel="nofollow noopener">https://makerworld.com/en/models/428258</a>The Gun:<a target="_blank" href="https://makerworld.com/en/models/469311#profileId-378676" rel="nofollow noopener">https://makerworld.com/en/models/469311</a>&nbsp;Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.&nbsp;Printsettings: No support No raft 0,16mm layer height

Jeep Kit Card

kit cards

ThreeD-Michael

<figure class="table" style="height: 330.43px; width: 90%"><table class="ck-table-resized" style="background-color: rgb(255, 255, 255); border: 1px solid rgb(230, 77, 77)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(230, 77, 77); padding: 0.4em; width: 50%">Please also take a look at my new <a target="_blank" href="https://makerworld.com/en/models/472979" rel="nofollow noopener">Sports Fan Whistle</a> - a full-fledged referee whistle with national colors.<figure class="image"><a href="https://makerworld.com/en/models/472979" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093412/design/2024-05-23_c1846612119bb.jpg"></a></figure></td><td style="border: 1px solid rgb(230, 77, 77); padding: 0.4em; width: 50%">I have also developed real Ultrasonic dog whistles at 20,000 Hz and above, which you can find <a target="_blank" href="https://makerworld.com/en/@ThreeDMichael/collections/876023" rel="nofollow noopener">here</a>.<figure class="image"><a href="https://makerworld.com/en/@ThreeDMichael/collections/876023" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093412/design/2024-03-17_2788bf9fc9fc9.png"></a></figure></td></tr></tbody></table></figure>WARNING: This is a dog whistle and not a toy! It&#39;s very loud which can harm the ears, so please protect your ears and don&#39;t use it near other people or animals!&nbsp;This dog whistle produces a very loud tone of about 14 kHz. It may seem quiet to you, but that&#39;s because humans (especially in old age) perceive higher sounds less loudly or not at all - unlike many animals! Since you might not hear this high pitched dog whistle at all (depending on your age), use a freqency measuring app for testing. I use <a target="_blank" href="https://play.google.com/store/apps/details?id=org.intoorbit.spectrum" rel="nofollow noopener">this android app</a>.&nbsp;How to print:Use a line width of 0.4 mm and a layer height of 0.2 mm, 6 top layers and 6 bottom layers.Print slowly to achieve sharp edges.

14 kHz Dog Whistle

Pets

JamesThePrinter

These Easter eggs are larger than normal. Actually, they are about the size on an emu egg! I would suggest that you choose 1-3 eggs and display them together. Adding extra eggs printed at varying scales can also look very nice. I have successfully tested them down to 25% scale with the exception of the Lattice Egg. The lattice is a retraction nightmare at smaller sizes. They should scale upwards without issue as well, but beware - they are pretty large already!&nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print SettingsBecause of the size, these eggs take a while to print. I found that I could speed up that process by limiting infill to critical areas only. Most of the examples above were printed at 0.2mm layer heights.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>MatterHackers Quantum Blue Raspberry PLA</li><li>MatterHackers Quantum Green Raspberry PLA</li><li>MatterHackers Quantum Blue Yellow PLA</li><li>MatterHackers Quantum Blue Green PLA</li><li>MatterHackers Quantum Silver Gold PLA</li><li>MatterHackers Quantum Pink Purple PLA</li></ul>

XL Easter Eggs

Easter

sassiecat3d

Timme is a T-rex, and he's of a very special species called a Cutasaurus Rex, they are very rare and only lives where theres a 3d printer in site! They love to hangh out on the varm cozy printer and makes sure nobody messes with the prints!&nbsp;*****&nbsp;Important when downloading the design: This is my design and copyight to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you download this file.&nbsp;*****&nbsp;For buying the commercial version where you can print and sell copys of a physical 3d printed version, go here: <a target="_blank" href="https://cults3d.com/en/3d-model/art/timmy-the-cutasaurus-rex-commercial-version" rel="nofollow noopener">https://cults3d.com/en/3d-model/art/timmy-the-cutasaurus-rex-commercial-version</a>

TIMMY THE CUTASAURUS REX

Animals

fay3dlab

A new collection of suspended model and this time its from the Star Trek series..&nbsp;This is the USS Enterprise NCC 1701 D from the television series Stat Trek Next Generation..I design the frame to look like the stardock with the enterprise in the middle.. since i cant use LED strips cause of the thin frame of the stardock.. i opted to use the Bambu LED Kit 001 that is placed on top of the stardock and closed with a cap..   There is also 2 extension of the warp engine that needs to be printed separately.. In order to make the ship printable vertically without supports.. I had to change the shape of the ship slightly to accomate floating regions..The stardock frame also has windows from each sides but i modelled it so it can be printed without supports..The only part printed with supports in the extension of the 2 warp engines..&nbsp;<blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote>&nbsp;I added multicolor print profile so feel free to change the colors as you see fit.. Have fun 3d printing.. &nbsp;<figure class="table" style="width:100%;"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td>If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td>By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td>And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>&nbsp;

Suspended USS Enterprise D with LED Kit 001

Star Trek

ZUPA 3D

PACMAN Light Box&nbsp;ATTENTION: Remove purge line at the beginning of the print!&nbsp;You can use the 22mm rubber caps you can buy on aliexpress, for example, to give the LED wires a better finish.

PACMAN Light Box

Lightbox

Jnholeman

Slowly learning how to make files and products so we wanted to share them with everyone else out there. These little straw toppers are sure to be a hit with your customers. This file is free to use and you can resell the products. So download away and make some money!&nbsp;This design is meant for straws that area standard size of 8.5 mm. I will be adding a larger design for the 12.5mm in the near future for those larger 30-40oz straws. But again this is only for the standard size straws.&nbsp;Thanks for downloading. Hope you enjoy the file

Heart xoxo straw topper 8.5mm straws for 20oz standard 

Valentines 

Martin Kozak

<h3>Model</h3>Print profiles have been divided by color.&nbsp;<h3>Postprocessing</h3><ul><li>Remove supports (some parts have pre-modelled supports, some have slicer supports, some combination of both).</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/424155/2023-12-30_7f665c461fbba.jpg"></figure><ul><li>Please use 4pcs of M2 screws to join 50163_a (black) and 50163_b (dark grey) parts together. Inner gear must rotate freele in outer ring.</li><li>TPU beams are split into two halfs. Please gluew two and two rods together. Insert filament into center hole to reinforce the connection.</li></ul><h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li></ul>&nbsp;

Compact Excavator 300 %

Vehicles 

hYPERfOCUS

New 20 gear model: <a target="_blank" href="https://makerworld.com/en/models/153612" rel="nofollow noopener">https://makerworld.com/en/models/153612</a>&nbsp;I set out to create one of the most versatile, complex, and clean fidget toys to challenge my design and print skills, and because I loved the concept of a 12 gear fidget spinner.&nbsp;The model includes 49 parts, and functions perfectly if your printer is well dialed in.&nbsp;The toy can be used in a number of ways. You can manually spin gears in one hand, or between two hands. You can pinch gears to spin the toy around in your hand, or spin the toy with two opposing gears. It's really quite fun, and serves as a good educational toy for kids as well.&nbsp;Putting it together is simple enough. Each gear has a screw, a washer, and a cap. Pop the screw through the gear, a washer on the back, then screw it into the core of the model. Once you've done that, you can pop the cap onto the gear.

hYPER Fidget Toy - Beveled gear fidget spinner

fidget 

SH Designs

I simplified the model to give it a more angular look and split it into two pieces to hide the seam. I don't have any pins to connect them, but I just used the lego head to align them and glued them with CA (superglue). File includes supports for the inside.&nbsp;This stylish hair fits perfectly on: <a target="_blank" href="https://makerworld.com/en/models/48116#profileId-50020" rel="nofollow noopener">The Mega Lego-Like Minifigure 10:1</a>

Lego Mega Hair

Misc

Houston713Texan

colors used pla blackpla redpla orangepla white

IT (HueForge print)

Hueforge

SmokieMcagee

I use tree supports at a 30. Also this still needs to be painted ether in bambu or by hand. But the stamp will allow for a easy click and fill paint job.

Seahawk Football Helmet

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

games

<figure class="media"><div data-oembed-url="https://youtu.be/LYwZcH8kKiw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LYwZcH8kKiw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Print-in-place and Articulated Surprise Egg #5 - Tiny Fire Truck Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.Both the fire truck and the egg was each designed to be printed in place without any support structures. The fire truck has three pairs of rotatable wheels, liftable and rotatable ladder. The egg is hinged<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>Rafts: NoSupports: NoResolution: 0,1mmInfill: 50Notes:3 Shell to make the axles sturdy

Surprise Egg #5 - Tiny Fire Truck

Vehicles

Romwba3D

A Cute Rocker Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;I have Just Released a Christmas version of this model also :- <a target="_blank" href="https://makerworld.com/en/models/67297#profileId-71190" rel="nofollow noopener">https://makerworld.com/en/models/67297#profileId-71190</a>&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Rocker Gnome

Figurines 

neil3dprints

Relive your 8 bit childhood with the Miniature Mario play-set. Simply unfold the case and attach the contained parts to the outside for hours of fun. The set also comes with a Mario and Koopa Troopa characters. Designed to resemble the a scene from Super Mario 3, this set provides entertainment for any fan of the original Nintendo game.This was originally released to my Patrons over a year ago. And as it was Mario day the other day, it felt like the right time to bring over to here.Be sure to refer to the images for assembly instructions.Also note this is not a MMU print. This is intended to print in parts in the appropriate colours and then glue together.For instructions on how to carry out filament changes mid-print, please refer to this link below on how to do this. <a href="https://help.prusa3d.com/en/article/color-change_1687" rel="nofollow">https://help.prusa3d.com/en/article/color-change_1687</a>If you are interested in early releases and exclusive designs please check out my Patreon.<a href="https://www.patreon.com/neil3dprints" rel="nofollow">https://www.patreon.com/neil3dprints</a>If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow">https://www.instagram.com/neil3dprints/?hl=en</a>Any questions or queries either leave a comment below or send me a DM.Happy printing. ;-)

Miniature Mario Playset - With Mario and Koopa Troopa Characters

Mario

πxel8ed

Started with designing a “ship in a bottle”. Ended up with this.&nbsp;Updates:<ul><li>1/20/2024: Updated model to double the strength of the webs. Check out the “V2” profiles.</li><li>1/16/2024: Uploaded a few tweaks to the Designer Profile (One, two, and three color versions) which enhance small details on the ship and improve print reliability</li><li>12/26/2023: Added “Optional Uplighting Kit” profile. It&#39;s a fast print, compatible with a variety of LED&#39;s and fits nicely. Makes the base of the model more significant so also a nice upgrade to add a contrasting portion to the base. Pick plate one or plate two depending on your preferred LED&#39;s:<ul><li>Plate 1: Fits the LED puck from the <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">Bambu Labs LED Lamp kit</a>.</li><li>Plate 2: Allows the installation of a length of LED light strip (or fairy lights) of various types. If you&#39;re just getting started with custom LED installs <a target="_blank" href="https://youtu.be/exAWzMfmwQ8?si=8TnrTyI9Lngt3264" rel="nofollow noopener">check this video out</a>.</li><li>Plate 3: Includes a lens that fits in the model base to diffuse the light from the LED&#39;s. The Bambu LED is very bright so I prefer printing the lens in white or colored PLA rather than translucent.</li></ul></li></ul>The Designer Profile (One, two, and three color versions) supports all Bambu Lab printers. Just make sure the Designer Profile is selected in Bambu Handy, click Print, then select the plate you want. If you instead open it in Bambu Studio you may need to select your printer model at the top left dropdown and choose to transfer all settings before slicing and sending to the printer.<ul><li>One color takes ~7hrs</li><li>Two color takes ~8hrs</li><li>Three color takes ~24hrs!</li></ul>Big thanks to <a target="_blank" href="https://makerworld.com/en/u/319145709" rel="nofollow noopener">@zviratko</a> for figuring out a work around to make one color prints reliable.&nbsp;Suggestions on removing support material if it does not just pop off initially:First, be sure to let it cool down completely before attempting to remove the support. We want it to be stiff, not flexible.When removing the support; hold the ship portion of the model firmly with one hand, with the other hand use the biggest needle nose pliers you can to grab the support chunk from the bottom where it was attached to the build plate. Make sure you have a firm grip and twist the pliers clockwise/counter-clockwise then pull straight out. Take your time. Don&#39;t expect it to pop off in one go. You&#39;re just hoping to cause some cracking noises. Then move the pliers to a different spot and repeat the twist/pull to hopefully create some more cracking noises. You&#39;re trying to achieve the same effect as when you bend a paperclip back and forth until it breaks. Eventually the support will come loose, just be patient.&nbsp;Enjoy!

A long time ago in a galaxy far, far away....

Star Wars

timhaxton

GI JOE LIGHT BOX. TOP LAYER CAN BE PAINTED TO MATCH THE ORIGNAL INSIGNIA

gi Joe light box

Logos

renebramirez02

In honor of them playing in the world series I designed this lightbox with the Texas Rangers logo. it has an opening on the bottom to allow an LED strip to be installed and has a hanger designed into the back cover to allow hanging on a wall, this model also has an optional stand that does not interfere with the cord for your LED light.&nbsp; This is for the front of the lightbox only.&nbsp;If you would like access to the stand, please check out my cults page for the full model.cults:<a target="_blank" href="https://cults3d.com/en/users/renebramirezA4C/3d-models" rel="nofollow noopener">All the 3D models of renebramirezA4C・Cults (cults3d.com)</a>

Texas Rangers Lightbox

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Pokemon

R C 3D

SUMMARY: This model is a replica AH-1S Super Cobra attack helicopter used by the Army and Marines. The model is designed to print and assemble easily, so there are minor modifications to the overall design in order to do that. The initial upload was the entire project file with multiple plates. I will be leaving this and v2 in the raw model files, but I’ve removed the print profiles as the latest revision supersedes these. If you come across any issues, please leave me some feedback. Assembly instructions are found below.&nbsp;<img src="https://lh7-us.googleusercontent.com/tPopnETRQjRIO8FbJdPHYaC800-p8eGpqc-B1n1SJd4BLnFpOugBpAmB-LMwMpCOa0UO-GaB0tq48P0GitCCJZqmSLlKZi84jvChGy6x3zY0L4iGlvlJD0Da17JlvR7pJuVIS_gMd27OLTCmjgVIosk"><img src="https://lh7-us.googleusercontent.com/RAi24oWbGOZX1C6OG33Sbn_4Mu3ZA6JglB5xoPTfGPkGhmgXO0tL9-Zp9oshsGoz09j-eW_O89YEAyBENcp_K8sZWGy2faVi6OjzPotN_fDPukNE1d5VYOW8a2NGEuSfmvB5NTmzVxTlWJiza6xLNjk">&nbsp;Printing/Post-Processing:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>0.16mm Layer Height</li><li>Arachne Wall Generator</li><li>3 Wall Loops</li><li>Gyroid Infill</li><li>Outer Wall Speed: 100 mm/s</li><li>Overhang Speed:<ul><li>25,50%: 40 mm/s</li><li>50,75%: 20 mm/s</li><li>75,100%: 20 mm/s</li></ul></li></ul></li><li>Cabin:<ul><li>No object specific settings changed, uses global slicer settings only.</li></ul></li><li>Tail:<ul><li>Enable Support: Paint them on under the stabilizers only.<ul><li>Normal (Manual)</li><li>Snug</li><li>On Build Plate Only</li></ul></li><li>Once printed, I use a deburring tool to clean up any rough surfaces on the overhang of the tail as well as the bottom of the stabilizers.</li></ul></li><li>Wings/Cowl:<ul><li>Brim Type: No-Brim</li><li>Enable Support: Painted on under the wings only. The remaining overhangs will print as is.<ul><li>Normal (Manual)</li><li>Snug</li></ul></li><li>Once printed, I used a deburring tool to clean up the bottom of the wings.</li></ul></li><li>Rotors, Landing Gear, Mounted Turret:<ul><li>Layer Height: 0.12mm</li><li>8 Wall Loops</li><li>Primary Rotor Brim: Outer Brim Only and 8mm Width.</li><li>Turret:<ul><li>Enable Supports: Normal (Auto)</li><li>Snug</li><li>On Build Plate Only</li></ul></li><li>Once printed, I used a deburring tool to clean up the bottom of the turret barrel. You’ll also need to remove the brim from the rotor and landing gear.</li></ul></li><li>Windows:<ul><li>The windows were designed to print on the topside so you can use a patterned plate to create visual effects.</li><li>There are 3 windows which need supports enabled. These are the rear left and right windows as well as the rear top window. The two side pieces may print fine as is, but have a very small angle at the corner. I’ve printed them successfully without supports, but why not? The top rear will definitely need the supports as it wraps slightly around the top.</li><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly requires no glue, but I recommend using super glue if this is going to be played with. The fit is fairly snug for most components, so all you need to do is press them into place. The connecting joints have sloped holes, so as you press the pieces into place, they will tighten down. I used a small clamp to make sure they were all pressed in sufficiently.&nbsp;<ol><li>Assemble the tail and cabin by inserting the alignment pin and pressing the pieces firmly together.</li><li>Insert the wings into the cabin and press firmly into place.</li><li>Insert the smaller alignment pins into the cabin and press the cowl onto the pins.</li><li>Press the windows firmly into place.</li><li>Push the primary rotor into the slot. This will require a little force, so I recommend either using a clamp and slowly tightening until it pops into place, or hold the piece parallel to the slot as much as possible and press directly onto the center of the rotor so you don’t bend the connector. Once it snaps into place, it should spin freely with no slop.</li><li>Push the tail rotor into place. Try to press slowly and straight so you don’t snap the connector.</li><li>Push the nose mounted turret into its’ socket. This will be tighter than the other two and once it snaps into place, it will have mild resistance when rotating.</li><li>Finally, press the landing gear into the slots on the cabin and you’re done.</li></ol>&nbsp;That's all there is to it. I tried to break it up into pieces that would likely be the same colors, but the raw files are also up. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE (11/22/2023):I revised several pieces to either print in fewer pieces or to assemble easier without glue. The overall project was reduced to 4 plates that print with settings closer to the default profiles.&nbsp;<ol><li>Increased tail rear curve radius to print easier without rough spots on the rear of the tail.</li><li>Revised the tail rotor to press into place without snapping as easily and to rotate freely without resistance.</li><li>Decreased tolerance on alignment pin for cabin and body. This ensures a tight fit that doesn’t require glue to remain in place.</li><li>Tightened tolerances for the wings, landing gear, and nose mounted turret.</li><li>Increased turret guide shaft diameter to provide mild resistance when turning. Revised the connector to hold in place more firmly.</li><li>Added connectors to the windows for a press-fit assembly.</li><li>Added alignment pins for the cowl.</li></ol>&nbsp;UPDATE (11/13/2023):The tail piece for the v2 print profile was missing the supports under the stabilizers. v2.1 fixes that.&nbsp;UPDATE (11/5/2023):I've made numerous updates to improve printer friendliness, ease of assembly, and functionality. I've uploaded the v2 files into the raw files repository as 3mf files. I've also added print profiles for each plate of v2. The settings used are above, so you may only need to change the filament type. Most of the plates with multiple pieces are auto arranged and printed by object to avoid banding at different layers. See the change log below:<ol><li>Combined the wings and their mounted weapons. There's a small integrated support that prints with this piece. It will leave a slightly rough edge on the wing, but a quick pass with a deburring tool cleans it right up.</li><li>Added a second alignment pin on the cowl so it's easier to align when assembling.</li><li>Added a guide on the main rotor so it doesn't wobble. It should feel tight and spin freely now.</li><li>Adjusted the rear rotor to fit better and prevent snapping the ends off.</li><li>Added a guide on the nose mounted gun to make it less wobbly as well.</li><li>Tightened up several connection points. The wings are a more snug fit now, but still require glue. The center alignment pin now fits very snug.</li><li>Combined the tail and stabilizers. These now require supports painted on underneath the stabilizers. This also leaves a slightly rough surface, but is cleaned up easily with a deburring tool. This eliminates another assembly step, and looks clean so I'm going to accept that it requires support. Any sharper of an angle and they wouldn't look right, so this is the best of both worlds I think.</li></ol>This version came out just as clean, but more functional and easier to assemble. I hope everyone enjoys it as much as I have!&nbsp;INITIAL RELEASE (9/19/2023):&nbsp;The models were designed to print without support. They're arranged on the plate how they should be printed, but the ones that matter most are the cabin and tail of the helicopter. As long as those are printed as shown with adaptive layers, they should come out as intended. The assembly is pretty simple, but I will include the steps below. Detailed instructions to follow in the near future.<ol><li>Super glue the cabin and tail together with the bottoms aligned.</li><li>Super glue the cowl on the top of the cabin with the indent aligned.</li><li>Super glue the gun turrets to the wings, and super glue the wings to the cabin.</li><li>Super glue the tail wings to the tail.</li><li>Super glue the machine gun barrel to the turret.</li><li>Slide the tail pin through the hole and super glue the rear prop to the pin.</li><li>Pop the primary prop into the slot.</li><li>Pop the machine gun turret into the slot under the cabin.</li><li>Press the landing gear into the slots on the cabin.</li></ol>Print Settings:<ol><li>I used 0.16mm layer height on all of them.</li><li>I set the cabin and tail to adaptive layers and smoothed out a bit.</li><li>I used 6 walls on the landing gear, props, barrels, etc. The plate with the primary prop.</li><li>Otherwise default settings including brims. No supports.</li></ol>

Helicopter - AH-1S

Military 

3Dennis

Appreciate the design? Consider supporting my work by <a target="_blank" href="https://makerworld.com/en/u/3694296089" rel="nofollow noopener">following my account</a> :) [Description by the original designer]&nbsp;SUPPORT ME ON PATREON, SO I CAN MAKE MORE COOL 3D PRINTABLES:<a target="_blank" href="http://patreon.com/join/philnelson" rel="nofollow noopener">http://patreon.com/join/philnelson</a>--Don't have a 3D printer? <a target="_blank" href="https://www.shapeways.com/product/PTMJVW4JK/for-the-love-of-dog" rel="nofollow noopener">Order a print online</a> in multiple colors and materialsA remix of the excellent little skull vase by garage.Made by <a target="_blank" href="https://twitter.com/philnelson" rel="nofollow noopener">@philnelson</a> of <a target="_blank" href="http://extrafuture.com/" rel="nofollow noopener">extrafuture.com</a>.If you like this style, check out the <a target="_blank" href="https://www.thingiverse.com/thing:1406836" rel="nofollow noopener">Robosnake eyepatch</a>.

Wireframe Skull Pencil Holder (For The Love of Dog)

Office

Picture_it

This one is a request from my daughter. Fun, quick print. Printed upside-down on textured pei plate.

Dead Inside Keychain

Keychains

Bottega 3D

For personal use only FOR COMMERCIAL LICENSE: <a target="_blank" href="https://www.patreon.com/bottega3d" rel="nofollow noopener">Patreon</a>. Social Tag: @bottega.3dAMS/MMU available in 3mf file.Love-ly is a cute articulated little dragon. It is printed in place and doesn’t require supports.If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.For personal use onlyAll my files are protected by Copyright, should NEVER be shared or resold.To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit: <a target="_blank" href="http://www.patreon.com/bottega3d" rel="nofollow noopener">www.patreon.com/Bottega3D</a>&nbsp;NOZZLE: 0,4 mm. LAYER: 0.16 or less OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0,4 – 0,8&nbsp;

Love-ly Tiny Dragon, Articulated, Flexy, Toy

Dragons

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Dark Gray At layer #17 (1.44mm) swap to Light Gray At layer #20 (1.68mm) swap to White for the rest.

Bellagio Las Vegas - Hueforge 4 color filament painting

las vegas

Cooper Coleman

Boston Celtics Light Box. I added a 8mm x 2mm hole for the LED light strip. Make sure you calibrate your filament for a successful print.Hope you enjoy it.

Boston Celtics  Light Box

Harry Potter 

squinn

A helpful display stand for holding all of the filament swatch samples that come bundled with the A1 Mini, or your own collection of favorite filaments. This is an easy print (no supports or brim are required), and then the swatches simply snap-in. After they're snapped-in, the swatches can be simply flipped to one side or the other, which provides a convenient way to mark the color you'd like to use in your next print.&nbsp;Two different sizes are provided. The small version can hold up to 40 swatches, and the large version can hold up to 80. Also included is an optional spinning base piece, allowing you to give the whole assembly a fun twirl. Use this with the official filament swatches from Bambu Lab, or print your own in whatever filament you'd like using the provided swatch model.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/127602/2023-10-17_9db1b08510ebb.gif"></figure>

Bambu Filament Swatch Display Tray

Accessories 

SmarTiks

Articulated Dragon model made by P1lotz at https://www.printables.com/fr/model/331094-articulated-christmas-dragon

Articulated Christmas Dragon

Christmas 

Nice quick print, less than an hour for one and about 12gr filament. Would look great with other colours too, and as a dress up necklace.

July 4th

plants

guns

kit cards

Pets

Easter

Animals

Star Trek

Lightbox

Valentines

Vehicles

fidget

Misc

Hueforge

NFL

games

Vehicles

Figurines

Mario

Star Wars

Logos

MLB

Pokemon

Military

Office

Keychains

Dragons

las vegas

NBA

Harry Potter

Accessories

Christmas

Disney

halloween