Mekon256

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Soldering

Alastor.746

For this type of lamp you will need bulb holder E14 for example here : &nbsp;https://www.ledakce.cz/e14-objimka--sacek-card/?gclid=CjwKCAiA1uKMBhAGEiwAxzvX9-V8kFpODXoE3T1tCg7agqUBpSck83jNvwJD09oVo8ZG143tBdP2IhoCKOYQAvD_BwE

Night Lamp

Lighting

TheMakerSphere

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀&nbsp;These are insert bins for the <a target="_blank" href="https://www.harborfreight.com/20-bin-medium-portable-parts-storage-case-93928.html" rel="nofollow noopener">Harbor Freight 20-bin Medium Portable Parts Storage Case</a>. I created a bunch of boxes using <a target="_blank" href="https://www.printables.com/@spuder" rel="nofollow noopener">spuder's</a> parametric bin insert file. The print profile has each insert bin on its own build plate to show you how they look in a single small box.&nbsp;Please note, these insert bins will only work on the small sized boxes. These do NOT fit the large and medium boxes.If you are looking for insert bins for the large and medium boxes, I have uploaded that here: <a target="_blank" href="https://makerworld.com/en/models/104450" rel="nofollow noopener">Harbor Freight Parts Bin Inserts - Large/Medium Boxes</a>.

Harbor Freight Parts Bin Inserts - Small Boxes

Storage

nolan.schmidt96

I designed this cam style ski holder to keep skis up off the ground and easy to grab. Simply lock the cams on the skis and friction does the rest. To remove you just need to lift up and away. &nbsp;For hardware you need 3" long ¼-20 bolts (https://www.mcmaster.com/91247A554/) and nuts (https://www.mcmaster.com/95615A120/)For the grip I used 3" wide 1/8" thick neoprene rubber strips, cut to length (https://www.amazon.com/dp/B01CGZPP9M?psc=1&ref=ppx_yo2ov_dt_b_product_details)&nbsp;I tried to use neoprene that was already adhesive backed, but the adhesive was not strong enough. I used some E6000 glue and that seems to work great.

Cam Ski Rack

Fun Stuff

mcmaven

<h2>Summary</h2>The Triaxial Tourbillon is weight driven and these STLs are a remix of A26's original design that I modified to add support for ball bearings and some other features. This remix was never meant to keep correct time, also it is very inefficient so the weight only keeps it working for a couple of hours. Therefore it is not a practical clock.&nbsp;I designed the 'Triaxial Quartz Movement Upgrade', which replaces the clock face in this remix, so it could be used to display the correct time when it was hanging on a wall.&nbsp;The weight in this remix is painful to wind, so make it easier to animate I designed the Motorized Astronomia. For the Motorized Astronomia I basically started with a clean slate. All of the parts have been redesigned, with no intention to be compatible with my original remix.&nbsp;Hopefully this information will help you know which design to download.&nbsp;To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here.

Triaxial Tourbillon Clock Make/Mods

Clocks

Joodis

Why spend dollars on a pill container when a few cents of filament can manage the same thing? Well because most of the other pill containers either have a full slide off lid, too many slots, and it was tough finding something similar enough to the easy to use commercial versions.&nbsp;Then I found the Pill Box Donut by Heapstar and it was near perfect, it just didn't have labels for the days. That's when I noticed it had 8 slots, and that 8th slot would be perfect for a “REFILL” reminder.&nbsp;I hope you all find this as useful as my lady has!

7-Day Pill Donut with Reminder Slot

Pill Box

kitchen

Fatter

Dremel tool rack modified to fit a Dremel 4000 with hose. It probably also fits other models.