david.esposito

DrJones

A sturdy pencil case (based on the <a target="_blank" href="https://makerworld.com/en/models/85052" rel="nofollow noopener">vault box</a>) with locking nuts, available with 1, 2, 3 or 4 compartments. The inside length of 17cm should fit most pens, even a short ruler.It's a print-in-place model, so no assembly required (except for the nut).Tolerances are tight; you can try the tolerance test first. If it doesn't work, try lowering the flow ratio or try a slightly negative X-Y contour compensation (like -0.05).I suggest printing the nuts (2 designs available) in a different color (I placed them on a different plate for that reason).

pencil vault (pencil case) with 1-4 compartments, print-in-place

Pencil Case

maCyo42

<h2><a target="_blank" href="https://makerworld.com/en/models/133452#profileId-155723" rel="nofollow noopener">NEW AMS Riser V2 is released</a></h2> Mods<figure class="table" style="width:95.3%;"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td style="border:3px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:28.23%;"><a href="https://makerworld.com/de/models/57617#profileId-59380" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/613666/2023-11-05_42be75b9c601c.png"></a></figure></td></tr></tbody></table></figure> This ist a Spool Holder Remix with Bearings for my AMS Riser Remix and the BLV - AMS Riser Spool Holder. It fits in the Spool Holder Storage Slot in my AMS Riser Remix. You need 2x 608ZZ Bearings. If you dont have Bearings at home you can print some. Search at Makerworld  happy printing Assembly is very easy<ol><li>First press the 2x Adapter in the Roller.</li><li>Press both Bearings on the End of the Roller.</li><li>Press the assembled Parts together in the Spool Holder Body. Rdy</li></ol>Update 20240301 New Mainbody Option In the Raw Model Files Section you can find now an new Body for Smaller Spools There is no Print Profile by myself, because i´ve never printed and tested it! <img src="https://makerworld.bblmw.com/makerworld/draft/613666/2024-03-01_94c40503302a6.png">

AMS Riser Remix Spool Holder w/Bearings by maCyo42

spooler

3DTechBase

I made the next small piece of my collection, of course there are versions in multi colors! :).The build plate guide helps you easily push the build plate to its exact location. An important aspect of the design was that it fit well, could be easily placed without much force, of course it should be easy to print and look good. Installation video in the description.&nbsp;I do not recommend mirroring the part and moving it to the right side! According to my practical experience, it is enough to place it only on one side, it does its job well and the right purge strip is far away. Please do not upload such models, I deliberately did not post the version on the right.&nbsp;I hope you like it too!&nbsp;Feel free to ask if you have any questions or comments!&nbsp;If you like this 3D model and are able to, please consider supporting my work by &gt; <a target="_blank" href="https://buymeacoffee.com/3dtechbase" rel="nofollow noopener">buying me a coffee</a> &lt; your contribution will go a long way towards making future creations! Thank you for being a supporter!<h3>The main features of the component:</h3><ul><li>It easily slides the building plate into the exact location</li><li>Practical</li><li>It fits well</li><li>Easy to install</li><li>It is easy to print and the support is easy to remove</li><li>single-color and multi-color versions are available</li><li>Available profiles for ABS, PLA, PETG materials</li><li>and yes, in my opinion, it turned out beautiful. :)</li></ul><figure class="image image_resized" style="width: 49.36%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000206386/design/2024-02-27_cbd53b138cff1.jpg"></figure>&nbsp;&nbsp;<figure class="image image_resized" style="width: 42.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000206386/design/2024-02-26_a553620b12ab2.gif"><figcaption>Build Plate Guide</figcaption></figure><h4>Installation video:</h4>Installation is very easy, even with one hand.<figure class="media"><oembed url="https://vimeo.com/916627033?share=copy"></oembed></figure><h4>Remove video:</h4><figure class="media"><oembed url="https://vimeo.com/916628368?share=copy"></oembed></figure><h3>Print:</h3>Quality: Layer height: 0.2 Wall Generator: Arachne Strength: Wall: 2 Filling density: 30 % Filling pattern: Adaptive cube Support: Enable Support: YES Style: Tight Remove small overhangs: NO Z distance: 0.15 Support/Object XY distance: 0.35&nbsp;Do not use PLA material for printing if you use your printer with other high temp. materials. PETG, ABS, ASA materials are printed at a higher temperature, which PLA cannot withstand. I recommend using ABS, ASA or PETG material.&nbsp;<h3>Recommend:</h3>I would like to recommend the following models to your attention (link, click on the photos):<figure class="image image_resized" style="width: 39.08%"><a href="https://makerworld.com/en/models/191408#profileId-211326" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000206386/design/2024-02-26_de173071bc73d.jpg"></a><figcaption>Poop Chute Holder</figcaption></figure><figure class="image image_resized" style="width: 39.21%"><a href="https://makerworld.com/en/models/173399#profileId-190536" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000206386/design/2024-02-26_ee85af2d161d8.jpg"></a><figcaption>Build Plate Holder</figcaption></figure><figure class="image image_resized" style="width: 39.44%"><a href="https://makerworld.com/en/models/254997#profileId-271353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000206386/design/2024-03-27_31fae24d857ba.jpg"></a></figure><h3>Update:</h3><ul><li>2024.02.26. - V11 - Based on the first feedback, I adjusted the corner section a few tenths of a mm looser.</li></ul>&nbsp;

Build Plate Guide for X1C / X1E / P1 series

New Axiom

Puzzle - Star&nbsp;Solve the puzzle and have fun with brain teasers!&nbsp;This model is easy to print and can be scaled up or down. On the pictures you can see a 100% and a 50% scaled version.For these prints I used 2 walls, 10% gyroid infill, and a concentric top and bottom layer.&nbsp;Additional:Instructions for solving the puzzle are below. However, keep in mind that this is close to cheating ;)&nbsp;Update 2023-11-14:A puzzle box is now <a target="_blank" href="https://makerworld.com/de/models/64323#profileId-67412" rel="nofollow noopener">here</a> available.&nbsp;Update 2023-12-18:Some people reported me, that they had problems with bed adhesion with mono color prints. So I added an improved MONO-COLOR print profile.“Mono-color_improved_anhesion_2walls_10infill”&nbsp;&nbsp;Happy printing!

Puzzle - Star

Puzzle

xile06

I wanted to be able to use a tripod quick connector and still be able to stand the Miraco upright. So designed this stand off. It is 7mm from the mounting point to the top of the legs.I am using the "FALCAM F22 Basic Quick Release Plate Kit" since its very small in size.I have also made ones a bit taller for different tripod mounts.Those are labled. _XXmm being the distance.

Revopoint Mirco feet/legs stand

Revopoint

Stress Tests

cv6Channel

I enhanced my last Remix of the Y-Splitter with a bar with the option, to plug into Filament from the side.You need in total now one more PTFE Connector.<ul><li>4x PC4-M10 pneumatic connector, inner diameter: 4 mm</li><li>2x M3 6mm</li></ul>I moved the Splitter a bit more to the edge to fit better for X1. I read some complaints in my Splitter Remix.&nbsp;To connect just use a 18cm to 20cm long PTFE Tube and place him between the upper connector from the splitter and the end at the bar.&nbsp;Its still/again based on Harald Geisler Splitter, which I liked most of all others.&nbsp;If you need only a Y-Splitter which is more inner but no sideload, check my <a target="_blank" href="https://makerworld.com/en/models/30469#profileId-26959" rel="nofollow noopener">Y-Splitter</a>.

Sideload for Filament incl. Y-Splitter 

keyboard 

print farm

KYZ Design

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/452124-under-desk-drawer-with-double-travel-stops" rel="nofollow noopener">here</a>, check out the previous 50+ makes and comments<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_741ebdf3aad638.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_2ef855184807e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_7e7782bb7c62a8.png"></figure>&nbsp;The remix adds built-in travel stops, added “tails” for stability when open, a double depth drawer version and more.&nbsp;Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)