davekilljoy

Carman3D

Fully 3D printed bench vise with replaceable jaws. Easy assembly, no glue. Mounting holes are spaced to mount to Threaded Pegboard that you can find in my uploads.&nbsp;I used supports on the parts named Main Body, Threaded Shaft (printed vertically) and Handle Assembly. I think there are better ways to do print them though, and most of you are more experienced in printing and will likely find better ways than I did with my first try.&nbsp;Note: In the pictures you can see where the bottom layer messed up on the one part and you can see the infill, I am very new to 3D printing, have only had an Ender 3 for about 3 weeks so that was my mistake printing, not with the design. I'm going to reprint but have been working on other projects as well.&nbsp;BOM:&nbsp;(1) Main Body(1) Clamping Part(1) Threaded Shaft(1) Handle Assembly(1) Set Screw(2) Jaw(4) Socket Head Cap Screw

Bench Vise (Threaded Pegboard compatible)

Tools

Frosthaven

make 3D

I needed a door sign for my new office space - So I made this after my favorite tv show. Hopefully others like it too. It measures 250mm x 86mm&nbsp;If you're printing this on a X1C please turn of flow calibration.

The Office Door Sign 

Random

ungarelli

ENG A very useful AAA Battery Holder If you like it and you want to support my work, please donate here: <a target="_blank" href="https://paypal.me/StefanoUnga" rel="nofollow noopener">https://paypal.me/StefanoUnga</a>ITA Un contenitore di batterie AAA, molto utile per riporle in maniera accurata e tenerne sotto controllo quante ne rimangono Se vi piace e volete supportare il mio lavoro, vi prego di donare qui: <a target="_blank" href="https://paypal.me/StefanoUnga" rel="nofollow noopener">https://paypal.me/StefanoUnga</a>

AAA Battery Holder

Battery

ken830

Easy access means you don't have to remove your spools to insert or remove the desiccant boxes!&nbsp;This is a two-box set that completely fills out the available space between AMS first stage feeders. First, the boxes are lengthened (vertically taller than the original) to fully fill out the vertical space. The second box is a shorter variant that fills up the space behind the first box, giving you even more volume for desiccant while eliminating empty space for the boxes to rattle around.I printed the original with PETG and the lid wasn't held tightly enough and would pop off easily. This heavily re-mixed version replaces it with a tighter-tolerance, deeper, dovetail slot.&nbsp;Print both boxes & lids. Fill with desiccant. Close lids (lids are identical). Lower the taller box (with tab towards back) between the first stage feeders and push it forward against the front of the AMS. Then, lower the shorter box (with tab towards front suggested) behind it. All without removing any spools.&nbsp;Many, many thanks to <a target="_blank" href="https://www.printables.com/@hunkoys_516229" rel="nofollow noopener">hunkoys</a> for designing and sharing the original model and Fusion 360 design file. It is a great design and the design file is very cleanly done. I'm also sharing the modified/remixed .f3d design files here.&nbsp;<h3>Differences of the remix compared to the original:</h3><ul><li>Increased length (vertical height) - Larger volume for desiccant</li><li>Eliminated inside rib/ridge - Larger volume for desiccant</li><li>Changed sliding lid slot profile to a deeper-cut dovetail with tighter tolerance - Eliminates lid popping off</li><li>Removed logo on cover</li><li>Added a shorter variant to be placed behind the main box - More volume for desiccant</li><li>Various minor modifications</li><li>Fixed slots on side that don't fully cut through wall of box.</li><li>Pull tab shortened to avoid potential interference with AMS lid (required after lengthening box)</li><li>Pull tab cut-out to make it easier to grip (front box sits flush against AMS wall)</li><li>Various minor adjustments (especially for shorter variant to adjust for different box dimensions)</li></ul>

Easy Access AMS Desiccant Box - Remixed Larger Set

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

Headphone stand

sergejbubko

Extra rail pillar for wooden rails train set. Fits rails from Lidl or Ikea.

Pillar for wooden train tracks

Train

HangarDesigns

Detroit Lions floating logo sign. THIS IS A MULTI-PART LOGO, that means it does not require an AMS/MMU! This is so the texture of the textured plate will be on the front of all the parts of the sign and to help achieve a 3 dimensional look as all the colors are different thicknesses. The different components (if large enough) are modeled with connecting pins to achieve a press fit, but a bit of CA glue doesn't hurt (ProTip- if CA glue cures without an accelerator, it may leave a smoky residue. If you apply a thin coat of WD-40 and wipe away, this residue will disappear). &nbsp;The base is modeled with an integrated hangar, kickstand, and standoff feet. &nbsp;The holes in the logo and base are designed to accept TPU adapters that allow the acrylic rods (with slight manufacturing diameter deviations) to be installed and removed easily, while remaining secure. These adapters can be found here <a target="_blank" href="https://www.printables.com/model/618429-tpu-bushing-for-floating-logo-signs" rel="nofollow noopener">https://www.printables.com/model/618429-tpu-bushing-for-floating-logo-signs</a>. The inserts are designed with a 2 degree draft angle to lock them in place once installed. I generally print these in clear TPU or a matching color TPU if I have it. I included the F3D file in case you want to change the design to fit any dowel you may have (or print). The dowels I use- <a target="_blank" href="https://www.amazon.com/dp/B09SKYYS5X?psc=1&ref=ppx_yo2ov_dt_b_product_details." rel="nofollow noopener">https://www.amazon.com/dp/B09SKYYS5X?psc=1&ref=ppx_yo2ov_dt_b_product_details.</a>&nbsp;If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns

NFL Detroit Lions Floating Logo Sign

Lions

SuperTrurl

Teamwork: My children model and paint, you download, and I get the rewards – please contact me if you need a manager ;)&nbsp;Modeled (and painted) by my children. Embraer Super Tucano Successfully printed in white PLA using support&nbsp;Reference:<a target="_blank" href="https://en.wikipedia.org/wiki/Embraer_EMB_314_Super_Tucano" rel="nofollow noopener">https://en.wikipedia.org/wiki/Embraer_EMB_314_Super_Tucano</a>&nbsp;

Embraer Super Tucano 

Airplane

rhrt94

This is a set of 6 Christmas ornaments. The photos above show each one frmo two different angles.

Christmas Teardrop Ornaments

Ornaments

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

Models

Whopper Printing

This design prints with NO support material and requires NO assembly. Print with the cab side DOWN. This is a great model to test your overhangs and tolerances. The tolerances are 0.3 mm.Be sure to download <a target="_blank" href="https://makerworld.com/en/models/13070?profileId=13070" rel="nofollow noopener">the excavator</a> that goes with it!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>