das.oboe

Sederx

simple cover for rog ally xg port, i printed it in temp changing PLA so it also acts as a temperature meter of sort

Asus rog ally port cover

vacation 

Mr25Days

I was annoyed that Frosthaven uses the same overlay tile as different types of terrain so I made these little overlays to drop down to match the rulebook. It makes seeing terrain types easier at a glance.I designed them for a .4mm nozzle doing .2mm layer height and .44mm line width. That should mean each wall is 4 lines wide and each overlay is five lines/1mm thick.I only did ones for difficult, hazardous, and obstacle, because I figured the rest would be self explanatory. I did include svgs of the blank version if you want to make your own of different terrain types.&nbsp;EDIT 10.06.23 — I am working on Bambu profiles/cmf for these. &nbsp;EDIT 4.25.23 — Added Icy terrain hexes. They're a little different than the others, meant to be printed with clear filament and cover the whole hex. They are .8mm/four layers thick since they have the structural integrity to get away with it.

Frosthaven/Gloomhaven Terrain Type Markers

board games

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

gifts

Kemykemy87

I recieved some new PLA+ filament from SUNLU, and the spool were made out of cardboard. The diameter of the spool would not fit the AMS Lite nor the adapter i had in stock for the SUNLU plastic spool, so i made a new one :It's in two parts, they are the same, and they are design to fit snuggly on each side of the spool, then it will fit the AMS Lite.It prints in 1 hour and use only 30 grams of filament.Printed in PLA+ from SUNLU, but PLA should be enough.

SUNLU SPOOL ADAPTER FOR AMS LITE

printer

angry-p1p

Following my articulated Dratini I would like to present you the evolution Dragonair.&nbsp;To reduce the chance of sagging layer lines I used a minimal amount of tree support as shown in the last image and reduced the printing speed for its wings.&nbsp;Default size is 24.5x182x35mm&nbsp;If you want to sell 3D prints please become a <a target="_blank" href="https://www.patreon.com/angryp1p/membership" rel="nofollow noopener">Patreon</a> and start selling :)&nbsp;RAW .stl for non Bambu Users available! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-02-13_9ed7d46333a48.jpg"></figure>Shellder/Muschas <figure class="image image_resized" style="width: 32.04%"><a href="https://makerworld.com/en/models/244869" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-03-11_945e3063d8015.jpg"></a></figure> Articulated Dratini <figure class="image image_resized" style="width: 19.81%"><a href="https://makerworld.com/en/models/147391" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-03-03_708b73510c176.webp"></a></figure>&nbsp;&nbsp;&nbsp;Articulated Gyarados <figure class="image image_resized" style="width: 34.31%"><a href="https://makerworld.com/en/models/193723" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-02-20_de90d12bd3fa1.webp"></a></figure>&nbsp;&nbsp;&nbsp;Keychain version <a target="_blank" href="https://makerworld.com/en/models/180339" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-02-10_7fc4cc0b412b5.jpg"></a>&nbsp;&nbsp;Pikachu Key Chain <figure class="image image_resized" style="width: 30.75%"><a href="https://makerworld.com/en/models/179448" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-02-10_33ef3f8ce178b.jpg"></a></figure>&nbsp;One Color Version:&nbsp;<figure class="image image_resized" style="width: 36.92%"><a href="https://makerworld.com/en/models/147389" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-01-19_2dfa09fb73b2f.jpg"></a></figure>&nbsp;More Pokemon related prints: <figure class="image image_resized" style="width: 23.43%"><a href="https://makerworld.com/en/models/124972" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-01-28_0b24300abf65.jpg"></a></figure> <figure class="image image_resized" style="width: 41.09%"><a href="https://makerworld.com/en/models/81994" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000221657/design/2024-01-28_8059aa8533b21.jpg"></a></figure>

vacation

board games

gifts

printer

toys