daniel-vesper

Spike_Mix

The model is divided into 4 cards that fit most print plates. The pieces are 2.5mm thick. You can scale them up or down if you need. Once you print the cards you have to break the thin tabs that hold them together and then you can assemble them as a puzzle. If you need a cheat to figure out how to put the pieces together correctly you can check the numbers in each slot to pair them together with the other side.&nbsp;Disclaimer: You may need to adjust the horizontal expansion in your slicer setting to make the pieces fit together correctly. I&#39;ve already added a bit of a gap margin in the STL files, but results may vary depending on your printer and filament.

Styracosaurus 3D puzzle kit card

dino

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #18 (1.52mm) swap to Gray At layer #20 (1.68mm) swap to Sakura Pink At layer #26 (2.16mm) swap to Jade White for the rest.

mickey mouse easter - HueForge

hueforgebilder

Benjamin Kott

<h3>Organizer Box Diamond Edition (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;This is a continuation of my Organizer Box. <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a><h3>Significant Changes</h3><ul><li>Duo Color</li><li>Base with Ribbons</li><li>Diamond Shape Cutouts</li><li>Reworked Fusion 360 Source Files</li></ul><h3>Design Decisions</h3>The diamond is a more unique pattern and is not seen that often like honeycomb or punch-hole. It is neatly stackable and also comes at 0 overhang requirements like a honeycomb pattern in contrast to punch holes. This makes the cutouts more clean when printing them. The second color and the additional pattern on the base, make the box more interesting to look at and touch. It feels more like something you would buy in a shop and not print in your basement 😅.&nbsp;Be creative, mix and match colors, to suit your style!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711102/2024-01-21_7183df6ee511d.jpg"></figure>&nbsp;<h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Border</li><li>Cutout Width</li><li>Cutout Spacing</li><li>Corner Radius</li><li>Base Size</li><li>Ribbon Size</li></ul><h3>Customizing Tips:</h3>This version is more resilient than the original one, but … If you try to create a round object, the transformation to sheet metal that is used to draw the pattern may fail. Don´t worry, fusion sometimes is unable to pick up the small area, you may need to correct the timeline here manually. I already wasted hours on this one, even though there is a tolerance and you cannot overtune the radius like in the last version. Just try again, sometimes it works 😅. I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>More Fusion 360 Parameterized Models</h3><ul><li>Organizer Box <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a></li><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>

Organizer Box / Boxes Diamond

nadine

TwistyPrints

The model does not require supports, the head is separate from the body, you can insert the head joint on the neck hole after print. If you need assistance just ask! Keep in mind that the purchase of this model does not include a commercial license. If you want to sell prints of our models ,get all our creations in early access and exclusive models take a look at our Patreon Page!⭐ ⭐⭐<a target="_blank" href="https://www.patreon.com/user?u=81262195" rel="nofollow noopener">https://www.patreon.com/user?u=81262195</a> ⭐⭐⭐ Follow us on instagram to stay updated about new models !-<a target="_blank" href="https://www.instagram.com/twisty_prints/" rel="nofollow noopener">https://www.instagram.com/twisty_prints/</a>

Articulated Cute Dragon

kids

Cynric10

This is a Skadis holder for Lego minifigures, as I can't add the remix because it's not found, the base design for the Lego part is from this gentleman:<a target="_blank" href="https://www.thingiverse.com/thing:4704725" rel="nofollow noopener">https://www.thingiverse.com/thing:4704725</a>