danielowen7

teedeebee

Simple but effective holder to place your 8-port network switch to the wall. This is suitable for the NetGear 8-port switches (i.e. GS308T in my case) for every switch with a width of 160mm and a depth of 30mm (including rubber feet). You can screw the holder to the wall or use double sided tape.

Simple 8-port Network Switch Wall Holder

Finz

The display stand for my set of decorative Japanese swords broke, so I copied the design to make a new stand. To make it visually interesting, top and bottom layer counts were set to zero, showing off the gyroid infill pattern. Note that the brace fits extremely snugly into the upright stands, and will be very difficult to remove without damaging either.

Japanese Sword Set Stand

Kids

ABDELat

All gridfinity basic bins, starting with 1x1x1 up to 6x6x12. Each file includes all heights from 0 (lid) to 12 (87.55 mm).&nbsp;These bins don&#39;t have magnet/screw holes. As long they are used for Drawers or non-moving places you don&#39;t need them.<ul><li>no labeling tab</li><li>labeling tab on the left side</li><li>labeling tab on the right side</li></ul>The generated 3mf-files are all based on this <a target="_blank" href="https://github.com/kennetek/gridfinity-rebuilt-openscad" rel="nofollow noopener">openSCAD rebuild</a>. I&#39;m using them a lot, they work as intended, easy to print.I&#39;ve include all printable profiles. The 6x6 version isn&#39;t currently printable, so there is no printable file. The 3MF-Version of each combination can also be downloaded in the raw-model-files tab.<h4>Bin Sizes in mm</h4>for all that don&#39;t want to calculate the sizes:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/760bc579-31a2-4876-9f86-9abd4176c954.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/44efbb41-6eed-494c-bd99-429ecba1642e.png">&nbsp;If you&#39;re looking for an easy to print grid, i recommend <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity base with snap connectors</a>. If you have an Ikea ALEX drawer, <a target="_blank" href="https://makerworld.com/de/models/28581" rel="nofollow noopener">here you`ll get all needed parts (inkl. spacer)</a>.&nbsp;Other Tools used:All files are generated with the help of a modded version of <a target="_blank" href="https://github.com/OutwardBuckle/OpenSCAD-Bulk-Export" rel="nofollow noopener">OpenSCAD-Bulk-Export</a>. Check out this git if your interested in bulk-exporting from OpenSCAD&nbsp;Printing:Print it in any material you like. For most applications PLA is good enough. The slicer recommends a brim. With a bit of glue or the textured PEI sheet it doesn&#39;t move.The 6x6 can`t be printed in one piece! Use the Slicer to split it as you like.I´ve in also included print-profiles for all versions.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;<h3>Parametric Model Maker</h3>I&#39;ve made a SCAD Version to work with the new <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>. Just download the “Makerworld.scad” (from Raw Files) and use it there. In the Customize Section, you can change most parameters the get the desired Bin you want. Use the button right next to do Download or <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker?designId=47599&amp;from=model_page&amp;scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSd2da6c53f14d3c%2Fmsfile%2F2024-04-16_1fd4308bde644.scad&amp;type=user" rel="nofollow noopener">use this link.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-10_09f49611aee0f.webp"><figcaption>Quick preview of the parametric model maker</figcaption></figure><h3>How to download the RAW files</h3>Since the last UI change the download option is a bit hidden. This is the current way to download the RAW files or the File for the <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-03_e07cda6ec065f.jpg"></figure><h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.&nbsp;Updates:2024-02-04: in the raw files section you can find premade zip-files wiht all generated boxes for each size, starting with 01x01x00 up to 12x12x12. This should help to create any box combination you like. Note: not all files can be printed as one piece! All zip files together are ~ 1.25GB i recommend to download them one by one!

Ultimate Gridfinity Bins Collection + Parametric

Gridfinity

ZW Design Engineering

Form, function, and a satisfying THØNK.&nbsp;The THØNK is big enough for 20+ Breville portafilter double-shot pucks at a time, and has a smoothly curved interior without nooks and crannies for coffee grounds to get stuck in. The base is slightly deeper than the top, giving it maximum stability and zero wobble or bounce. The rim is raised to prevent any splash out of coffee grounds.&nbsp;There are two versions of the knock pad, depending on whether you want to print a TPU insert or not.<ul><li>If you do not want to print TPU, you should print knockbox_with_basin.stl. In this model, the area for the knock pad is cut out as a basin so you can pour an appropriately shock absorbent material in there until it is level; I don't currently have any TPU filament, so my build as shown uses hot melt glue (EVA), smoothed with a heat gun. You could use RTV silicone or similar materials as well.</li><li>If you do want to print TPU, you should print knockbox_with_insert_cutout.stl in whatever rigid material you like, and then knockbox_soft_insert.stl in TPU. The insert may be printed without support in either orientation (depending whether you like the texture of the print bed on the visible side of the insert or not). There is 0.2 mm of clearance on the left and right sides to allow for solid contact on the bottom of the pad when gluing.</li></ul>With the basin knock pad, printed in PLA with 15% gyroid infill, this knock box feels plenty sturdy and weighty, and stands up to a heavy portafilter quite well. Obviously PLA has temperature limitations, so you could use PETG, PA6, PC, or your high temp engineering material of choice if you want it to be dishwasher safe. So far, even just in PLA, there has been no deformation from hot coffee pucks falling into it, so if you're willing to hand-wash, PLA seems perfectly viable.

THØNK | Espresso Knock Box

Coffee 

XentoBi

<h2>MODEL DESCRIPTION</h2>This model represents an enhanced version of the initial design while maintaining identical functionality. In this remix, a strategic removal of the rear wall minimizes material usage, and adjustments to overhangs have been made for improved printability.For optimal results, I highly recommend utilizing a brim during the printing process to prevent any instability in the heel section.In the accompanying images, you&#39;ll find the recommended orientation for printing, ensuring a seamless fit without the need for scaling. While adjustments may be necessary to align the object precisely, some users have reported successful results by scaling it down to 95%.Extensive testing, including compatibility checks with the X1C, confirms seamless integration with this remodeled version. It&#39;s worth noting that, similar to the original model, this remix maintains compatibility with the P1P even without an enclosure, offering users a consistent and reliable experience.&nbsp;If you want offer me a coffee: <a target="_blank" href="https://paypal.me/MCermaria" rel="nofollow noopener">https://paypal.me/MCermaria</a>&nbsp;<h2>DESCRIZIONE DEL MODELLO</h2>Questo modello rappresenta una versione migliorata del progetto iniziale pur mantenendo la stessa funzionalità. In questo remix, la rimozione strategica della parete posteriore riduce al minimo l&#39;utilizzo del materiale e sono state apportate modifiche alle sporgenze per migliorare la stampabilità.Per risultati ottimali, consiglio vivamente di utilizzare una falda durante il processo di stampa per evitare qualsiasi instabilità nella sezione del tallone.Nelle immagini allegate troverai l&#39;orientamento consigliato per la stampa, garantendo una perfetta aderenza senza necessità di ridimensionamento. Sebbene possano essere necessarie modifiche per allineare con precisione l&#39;oggetto, alcuni utenti hanno segnalato risultati positivi ridimensionandolo al 95%.Test approfonditi, compresi i controlli di compatibilità con l&#39;X1C, confermano la perfetta integrazione con questa versione rimodellata. Vale la pena notare che, simile al modello originale, questo remix mantiene la compatibilità con il P1P anche senza custodia, offrendo agli utenti un&#39;esperienza coerente e affidabile.

BambuLab Poop Bin for Filament Purge (p1 x1 trash)

Accessories 

3D Print Masters Hub

Stackable Bin Box-Great for organizing misc hardware parts, batteries, screws, clips and more!&nbsp;Internal Size:<ul><li>3.5&#34; wide x 6&#34; Length x 2.6&#34; High</li><li>90mm wide x 155mm Length x 66mm high</li></ul>-Easy print.-Scale down as needed.-See my profile for more configurations!!-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Stackable Bin Box

Storage

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;