Printed at 100% scale in PETG: Bambu PETG Translucent Clear Bambu PETG Translucent Light Blue

Print functionality is great, rockets launch without issue. I had difficulty getting the plunger to rebound after launching, therefore I incorporated a spring into the top plunger so that it automatically springs back into position

Quick and easy print, printed in Bambu Lab Matte Pink and White at 110% to use as a travel case for my daughter's crayons. Works great! Thank you for sharing.

Great print and desk fidget toy. Only recommendation would be to make the decorative wheels each about 0.5 to 1 mm thicker, when spinning the fidget fast the wheels can be flimsy and lose connection. Alternatively, I'd suggest some type of front nose cover on top of the wheels that locks the decorative wheels down.

Printed in BL Pink Matte PLA and white

Printed in three different sizes (50%, 100% & 200%), filament brands and colors, all worked off the build plate without issue. The beige was printed on my Snapmaker 2.0 A350 which shows some ringing but that is because of the printer and not the model. 50%: BL PLA Matte Sakura Pink (11201) 100%: BL PLA Matte Desert Tan (11401) 2005: Overture PLA Electric Blue

Printed in BL Pink PLA for daughter's playroom, worked perfectly off of build plate

Repainted and printed on X1C, all functional parts worked as expected and is a fun fidget/test print

Easy print that turns wasted space into function, added double-sided tape and stuck to the inside of kitchen cabinet

Printed on my BL X1C using white and blue PLA and then used 3D Gloop to join the parts permanently. After assembling the roller shutter worked great and does not come off the track (an issue I have had with similar models), the tolerances built into the model make joining the parts easy and my only piece of feedback would be to increase the thickness of the roller shutter so that it's more sturdy and durable long term. As you can see from the photos, the size of the case is perfect. May also be worth adding a handle or a clip such that the case could be attached to a carabiner for easy on-the-go storage

Printed on my X1C using BL PLA white and the textured PEI build plate. Print turned out awesome and gave is as a gift so cannot say enough good things about this print profile's ease and the quality of the output. Thank you for sharing

Printed in BL Translucent PETG at 110% scale to fit my larger digital caliphers -- NEIKO 01409A 12” & NEIKO 01408A 8” Electronic Digital Caliper

Printed in PLA, white with black eyes and at 100% scale, no issues printing, painting, scaling or using, great model!

Printed in PLA for my wall at 100% scale using BL Matte Desert Tan (11401) and Protopasta Blue Ice Translucent HTPLA to go for a sand and beach vibe. Also imported into Fusion 360 to craft a wall mount (pictured), was able to hang on wall with friction fit between mounting bracket and Double Face Model

Printed in pink PLA for daughter's playroom and desk. Imported the model into F360 to remix and remove screw holes such that back piece attaches to object with double-sided tape rather than screws. Works great and sturdy/solid design

Printed with designer's default profile on my Bambu Lab X1C using pink and black PLA. Printed quickly and precisely despite the small parts and assembly was easy/quick. Nice gift for a spouse or loved one that knows of your 3d printing abilities while apologizing for the continued time suck of 3d printing

Printed in Pink PLA for my daughter's headphones, works exactly as shown and easily attaches to a desk or wall with double sided tape. Great model and design, thank you for sharing!

Printed three different iterations of PTFE plugs from Maker World and Printables (links below). Based on my personal experience and testing thus far, this PTFE plug is the easier to print, use (insert and remove into PTFE coupler) and prints in a manner that does not break in the PTFE hole, as I experienced with the other two models and based on the printing orientation. I printed all three iterations with two different profiles -- PLA Basic with supports enabled (PLA) and PLA with PLA Support and a raft on the bottom, see attached photos for reference: Personal Preference: https://makerworld.com/en/models/195922-ptfe-coupling-plug#profileId-216650 Models shown in photos: (1) PTFE Coupling Plug - https://makerworld.com/en/models/195922-ptfe-coupling-plug#profileId-216650 (2) BEST PTFE Cover plug tube - https://makerworld.com/en/models/127376-best-ptfe-cover-plug-tube#profileId-137813 (3) Custom PTFE plug 4mm - https://www.printables.com/model/409383-custom-ptfe-plug-4mm