dangra

Dingus Dude

Storing your filament in vacuum bags works great but adding desiccant to that bag is even better. The Spool Shield puts desiccant right up against the filament instead of adding it to the inside of the core. Inside the core the desiccant is completely sealed off from the filament! Having it right next to the filament on the outside allows for actual humidity management.&nbsp;Print as many as you want. If you live in a humid environment then adding more than 1 Spool Shield is recommended. Some filaments are more hygroscopic than others, for example TPU will absorb water much faster than PLA.

Spool Shield - Filament Spool Desiccant Holder

Printer-Tools

radupersoiu

<h3>Description</h3>For other bathroom accessories like towel hooks check my profile <a target="_blank" href="https://makerworld.com/en/@radupersoiu" rel="nofollow noopener">here</a>.&nbsp;Very slim version <a target="_blank" href="https://makerworld.com/en/models/379988#profileId-280150" rel="nofollow noopener">here</a>. (available only with screws)It is made based on the model <a target="_blank" href="https://makerworld.com/en/models/379664#profileId-279789" rel="nofollow noopener">here</a>.&nbsp;Description:<ul><li>I recommend using ~5 walls (already in the file provided) for stronger outcome.</li><li>Double check for your Layer Speed in order to have consistency between them. If required, lower the speed to match all the others.</li><li>The model has 2 variants with or without screws.</li><li>Both are also mirrored for your liking.</li><li>The screws are hidden.</li></ul>Please let me know your feedback. If there are any larger toilet papers you use let me know and I will adapt it.

Modern Toilet Paper Holder with wet Toilet Paper

Bathroom

Remixx

A simple vase that can hold a flower such as a rose.This object is easy to print.I recommend adding sand to the bottom of the vase for greater stability.The filament used in the photo is from Polyterra.Don't forget to share your creations and print profiles  Enjoy !&nbsp;&nbsp;

One flower vase

Vase

Hooks

Infinity 3D Prints

FUN ART&nbsp;please visit this account for the light box version !!! https://makerworld.com/en/models/217226#profileId-2362470

STAY POSITIVE SKULL ART

Wall Art

apex3D

Ludo is simple and fun game know under Ludo, Mensch ärgere Dich nicht, Man, Don't Get Angry or Člověče, nezlob se!&nbsp;I wanted to make nice, small, easy to print and assemble portable game…&nbsp;Model&nbsp;FEATURES<ul><li>Colorful even without AMS</li><li>3 different types of figures</li><li>Easy to print and assemble</li><li>No supports, flawless print</li><li>No glue, magnets or anything else</li><li>You might need a dice (so you have higher chance of that dice being true, if you do not care, you can just print one…)</li><li>124x124x22mm</li></ul>HOW TO PRINT?Choose my profile MULTICOLOR AMS or MULTICOLOR NO AMS. They contain all the parts you need but dice.<ul><li>Main Body</li><li>Lid</li><li>Color plate - center</li><li>Color plate - corner</li><li>5 figures of each color (you only need 4 but you know how it is…)</li></ul>Print in desired colors and you are good to go!&nbsp;ASSEMBLYIt is designed in a way that you do not need glue or magnets. It utilizes springy latch mechanisms, so you can replace them if you wish to print from different color.Print all main body and the lid. Then there are 4 sets of color pieces (figures + center and corner plates). Cut them apart with cutter and assemble main body with center and corner pieces.<figure class="image image_resized" style="width:50.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_ad4fdb71090e2.png"></figure><figure class="image image_resized" style="width:49.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_dc055dcaf7ef7.png"></figure>The lid also just snaps in a place when inserted to hold figures inside while traveling.<figure class="image image_resized" style="width:49.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_8824a1fc478b4.png"></figure>&nbsp;DIFFERENT FIGURES?I was playing with a design of figures to find what is the best fit so I ended up with 3 different options for you. By default profiles contain clearance type of figure.<figure class="image image_resized" style="width:48.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_d0049303ff65.png"></figure><ul><li>Clearance - good for most cases, fits quite nice into the board, but can fall of.</li><li>Friction - it is tapered and slightly oversized. This results in nice snug fit if desired.</li><li>Spring - ideal for when you want to travel, thanks to springy design they fit snugly yet they are easy to remove.</li></ul>&nbsp;HOW TO PLAY IT?Game Board and Setup:<ul><li>The game board consists of 40 spaces.</li><li>Each player has four game pieces, which start in the “Home” area.</li><li>The game pieces are placed in the four spaces on the left side of the board.</li><li>The colored space to the left of the center is the starting space for each player.</li><li>The white space to the right of the starting space leads to the player’s home row.</li></ul>Gameplay:<ul><li>Players take turns rolling a six-sided die.</li><li>The rolled number determines how many spaces a game piece can move forward.</li><li>Rolling a six allows a player to bring a piece into play (from the “Home” area to the starting space) and roll again.</li><li>If a piece is on the starting space and there are still pieces in the “Home” area, it must be moved out.</li><li>Pieces can jump over others and can knock an opponent’s piece back to their “Home” area.</li><li>Players cannot knock their own pieces or move beyond the last space in their home row.</li></ul>Winning Condition:<ul><li>The first player to get all their pieces into their home row wins the game.</li></ul>

Ludo - Portable Board Game (Mensch ärgere Dich nicht)

Board Games

FiBaLi

Servus&nbsp;My wife wanna some easter deco,that my result 😊share it like it and have fun with it.Check my Profile for another cool projects <a target="_blank" href="https://makerworld.com/en/u/117158862" rel="nofollow noopener">https://makerworld.com/en/u/117158862</a>&nbsp;I use for this project Matt PLA from Bambu&nbsp;Matte Lilac purple <a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271986803" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271986803</a>&nbsp;Matte Lemon Yellow <a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271528051" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271528051</a>&nbsp;Matte Grass Green <a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271921267" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271921267</a>&nbsp;

Eggshell

Easter Fun

Aven

Manual juicerenjoy your 3D printing

juicer

Kitchen

maegu_

Decorate your coffee with an other coffee

Latte Art - Coffee in coffee

Stencil Coffee

Sesty80

Harley Quinn sexy en 4 couleurs&nbsp;huefoPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Brown At layer #7 (0.64mm) swap to Latte Brown At layer #11 (0.96mm) swap to Jade White for the rest.

Harley Quinn Sexy

HueForge

Josh-3D

Stackable trays! Offered in several variations and sizes! There's a Small, Medium, and Large. Small and Medium will fit on mini-sized printers like the A1 Mini! &nbsp;I recently (12/19/2023) updated these from the previous version! Fixing some of the printing issues. Additionally, I sized things to be in 3 sizes. Previously I only offered the largest with the suggestion of a .75 or .5 scale. This time I've done it for you! There's a lot of things like this out there, but these are mine. I originally created them so I could keep screws and misc parts sorted while I built printer kits. Wanted them to be stackable, so at the end of the day I could tidy up my work space. I use them for all sorts of projects now, and they're still just as handy!

Stackable Trays

Tray

Sakul

Top and bottom are simply glued on the body.There are files included to print the body either as normal print or as vase mode.

Women Body Piggy Bank

Sculpture

MottN.

OverviewThis is a wall mounted counter sign that uses customizable sign plates. The signs can be made with the MakerLab make my sign app. You can use some that I have uploaded or make your own - instructions for sizing are below.&nbsp;Unfortunately at this time this is not printable on the A1 Mini. I might make a scaled down version in the future.&nbsp;The sign features a face plate that holds two dials which can be turned from the left or right. Springs on both dials make turning snappy and keep the display indexed on a number.&nbsp;&nbsp;There are 3 hang points at the top.<img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_70a731e70ec85.png">&nbsp;Once Printed, snap pegs, springs, and respective dials into position.&nbsp;Parts PrintingPrint each plate of the included print profile, or print parts as below.&nbsp;1x of each dial. Apply a color change at height for the numbers, and I recommend fuzzy skin on the lower part of the dial so it is a little more grippy when turning.&nbsp;Face 1x - make sure and print with no supports.&nbsp;springs 2x. PLA is fine. PETG is good too but will be a little less stiff.&nbsp;Pegs 4x&nbsp;I put the small parts (springs and pegs) onto their own plate. You could print together with the bigger parts, but I wanted the pegs for mine to be white to match the sign backgrounds.&nbsp; Make Your Own SignsThis counter uses an upper and lower sign, make each as indicated.If you have a good idea for sign plates for use with this counter, Upload your signs as a remix to this file so other people can easily find them!&nbsp;&nbsp;Parameters:<ul><li>Dimensions<ul><li>Upper sign size: 200x50mm</li><li>Upper sign size: 200x100mm</li></ul></li><li>Keep default base plate thickness of 1mm</li><li>Select double holes on top<ul><li>Hole size 5mm</li></ul></li><li>Important! Do not change default corner radius.<ul><li>Corner radius changes the hole distance from the edge, so if this is anything other than 10mm, you sign holes will not line up with the pegs on the counter board.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_efbd46adf67a.png">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Existing SignsI will update this to add signs as either print profiles or remixes.&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)

Counter Sign, Customizable

Logo in nice

DeepSouth3DPrints

Merry Christmas Gnome Door Corner!&nbsp;I've uploaded two print profiles for the model to be printedFace Down on the build plate which will give the model a clean textured lookwhen using the gold pei plate!&nbsp;Please give it a like! It helps getting noticed forothers to enjoy. Thanks andMerry Christmas!&nbsp;You can find my other Christmas decorations <a target="_blank" href="https://makerworld.com/en/u/1201824007/collections/122929" rel="nofollow noopener">here</a>

Merry Christmas Gnome Door Corner

Christmas

genericcarbonlifeform

Add something a little extra festive this year when you send out your Christmas cards by including a snap-together kit card of a Moravian star ornament. Designed to be thin enough to easily fit in the envelope, but thick enough to be sturdy while breaking off and assembling. No glue required!Four variations are included:<ul><li>-mc-blank : Merry Christmas</li><li>-mc : Merry Christmas, from ours to yours</li><li>-hh-blank : Happy Holidays</li><li>-hh : Happy Holidays, from ours to yours</li><li>-blank-blank: Empty for your own text</li></ul>There is enough space in the “blank” versions to easily add your own custom text below the salutation using a tool like Tinkercard.----Print at 0.2mm layer height to ensure the best fit. Changing the resolution could affect the fit of the parts as the tolerances are precise: loose enough to allow easy assembly but also tight enough to stick together while hung.Pause at layer 9 to put in a filament change to create contrasting colors for the text. Or you can easily use a marker to color the letters after the print.With a bit of careful arranging as shown in the last photo you can print four models on the build plate of an Ender 3 style 235x235mm sized bed.

Moravian Star Kit Card

Kit Card

AzraelGehenna

A MasterSpool reel for the Bambu AMS system, you can of course also use it without an AMS, it is good for refilling, but also good for winding up.I hope you like this model, please feel free to give your feedback :D

MasterSpool for Bambu AMS

Tools

J0S3PH

This version of Adafruit's Spaceship Earth accommodates common 6x3mm magnets and adds the proper depth to the tabs so you can press-fit them in with some needle nose pliers. If you prefer not using tools, there's an optional 6.2mm model you can print and use CA glue to secure the magnets.<h3>Modified BoM to save cost and achieve the same result</h3><ul><li>1x Micro USB Breakout Board <a href="https://www.amazon.com/dp/B07X86YFFN" rel="nofollow">https://www.amazon.com/dp/B07X86YFFN</a></li><li>4x WS2812B LED wire strip <a href="https://www.amazon.com/gp/product/B0BVZLSDH6/" rel="nofollow">https://www.amazon.com/gp/product/B0BVZLSDH6/</a></li><li>1x NodeMCU ESP8266 <a href="https://www.amazon.ca/dp/B0B49SZNKP" rel="nofollow">https://www.amazon.ca/dp/B0B49SZNKP</a></li><li>1x 6x3mm Magnets <a href="https://www.amazon.ca/dp/B0B5ZWJ1FV" rel="nofollow">https://www.amazon.ca/dp/B0B5ZWJ1FV</a></li></ul>There isn't really a need to use the more expensive USB type C breakout connector. All you're using it for is 5v power. I've added a modified bottom cover with a snap fit to save cost on screws if you use the one in the BoM above.<h3>Optional Tips</h3><ul><li>This model requires 156 LED's. Unfortunately they come in strips of 50. Leave 6 holes empty at the bottom if you only want to buy/use 3 full strips. </li><li>Cut and re-solder the included connectors for the LED's after you finish gluing the led's around the middle where the two halves come apart. This makes it easy to disconnect the two halves if you ever need to in the future.</li></ul><h3>2023-06-14</h3>Added two additional stl files with a 6.2mm magnet diameter for a looser fit in case your magnets were manufactured with a larger than 6.00mm diameter.<h3>2023-06-15</h3>Added a modification to the sphere cover to snap fit this micro USB breakout board in BoM above.Here is a link to the original Adafruit model: <a href="https://www.printables.com/model/482760-epcot-spaceship-earth" rel="nofollow">https://www.printables.com/model/482760-epcot-spaceship-earth</a>

EPCOT Spaceship Earth with 3x6mm Magnet Holes

Nice Design

chippwalters

Use my print profile for best results, I cannot guarantee print profiles by others.&nbsp;For more different planters, please check out<a href="https://www.chipp.com" rel="nofollow"> https://www.chipp.com</a>&nbsp;Introducing a innovative self-watering planter which is a planter with a clay texture, featuring a detachable stand and designed to be printed without supports. Simply place your plant and soil in the interior container, slide it into the exterior container, pour water through the fill hole, and seal it with the fill cap. This clever design seamlessly accommodates existing plants brought from the store by easily transferring them from their 4&#34; pots into the planter.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047230/design/2023-10-22_3e25b544eb56d.png"></figure>&nbsp;For the plant stand, it is crucial to print it as shown to maintain the optimal strength of the screw threads. While PLA works well, please avoid exposing it to direct sunlight if you intend to leave it outside. Consider using ASA filament for outdoor placement to ensure durability and longevity.

Self-watering flower pot and planter

Flower Pot

logwave

Perfect fit LED holder for standard LED strips for the original LED lamp by BambuLabModel: <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">LED Lamp 001 by Bambu Lab - MakerWorld</a> The LED holder allows standard LED strips to be used for the base of the original LED lamp from BambuLab.A hole has been added to the bottom of the holder for an optional fusible thread. However, the holder can also be glued to the lamp base.In the example pictures a WS2812b 60LED /1m with a WLED controller was used. The WLED effects are displayed brilliantly.&nbsp;NEW: BambuLab Lamp LED socket : <a target="_blank" href="https://makerworld.com/en/models/45636#profileId-47362" rel="nofollow noopener">BambuLab Lamp LED socket by logwave - MakerWorld</a>&nbsp;------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;Passgenauer LED Halter für Standard LED Stripes für die Original LED Lampe von BambuLabModel: <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">LED Lamp 001 by Bambu Lab - MakerWorld</a>&nbsp;Durch den LED Halter können Standard LED Stripes für den Sockel der Original LED Lampe von BambuLab genutzt werden.Im Boden des Halters wurde ein Bohrung für ein optionales Schmelzgewinde hinzugefügt. Der Halter kann aber auch an den Lampenfuss geklebt werden. In den Beispielbildern wurde ein WS2812b 60LED /1m mit einem WLED Controller genutzt. Die WLED Effekte werden brillant dargestellt. &nbsp;NEU: BambuLab Lamp LED socket : <a target="_blank" href="https://makerworld.com/en/models/45636#profileId-47362" rel="nofollow noopener">BambuLab Lamp LED socket by logwave - MakerWorld</a>