dams5111

Scubafan

I created that lightbox by request.&nbsp;If you like my work and want to support me then feel free to buy me a beer<a target="_blank" href="https://www.paypal.com/paypalme/scubafan?country.x=DE&amp;locale.x=de_DE" rel="nofollow noopener">By me a beer</a>&nbsp;&nbsp;Electronics:I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wiresThe power supply and the DC barrel connector I used<a target="_blank" href="https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&amp;th=1</a><a target="_blank" href="https://www.amazon.de/dp/B09PD6J4BN?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B09PD6J4BN?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;Assembly:<ol><li>Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.</li><li>Measure the length of the light strip and then cut it to length.</li><li>Solder the wires and the barrel connector to the light strip</li><li>Mount everything into the front part</li><li>Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures</li><li>Close the box</li></ol>For more details check this light box.<a target="_blank" href="https://makerworld.com/de/models/60268#profileId-62430" rel="nofollow noopener">https://makerworld.com/de/models/60268#profileId-62430</a>

Bally Lightbox

Flipper

Kocyns

<h3>INTRODUCTION</h3>This car model was created based on the <a target="_blank" href="https://makerworld.com/en/models/218462#profileId-241229" rel="nofollow noopener">Golf 1</a> model and inquiries for additional models. I adopted the best know-how and found further improvements for easier assembly, strength, and better appearance.&nbsp;The model will now be regularly updated because the template has a lot of details that cannot be done in a short time.&nbsp;If you have any ideas for improvements or modifications, please let me know!&nbsp;<h3>BASIC INFO:</h3><ul><li>scale 1:40</li><li>Glue is not needed</li></ul><h3>ASSEMBLY:</h3><figure class="media"></figure><h3>UPDATE:</h3><ul><li>Added version R1.4</li></ul><figure class="image image_resized" style="width: 73.82%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376939/design/2024-04-25_f1be529cdd6d6.png"></figure><h3>Planned improvement:</h3><ul><li>new rims ✅</li><li>details/additional parts of the model ✅</li><li>AMS</li></ul><h4>Commercial uses:</h4>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;

DeLorean DMC-12 (Back to the Future) - Kit card

BTTF

Pixel Printz

NYE Champagne Lightbox <ul><li>1 Complete Lightbox print time = 1hr 48m / 68.32g **</li><li>All 3 Lightboxes print time = 5hr 22m / 205g **</li><li>Fully Scalable</li><li>Completely reusable for 2025 or other celebrations</li><li>More “Light insert” patterns to follow</li><li>PEI Textured plate adds a firework-like sparkle!</li></ul>** Using X1C with AMS&nbsp;IMPORTANT NOTE:<ul><li>Ensure the Z height for diffusers remains the same when scaling</li><li>LED Access hole will need to be considered if scaling down</li><li>Attatching the flute to the stalk may need some “persuasion” </li></ul>

NYE Champagne Lightbox

Champ

ssweat

**Work In progress hoping to add a light, fix weak key ring loop**I printed some of the parts on my Bambu A1 and rest on my Bambu P1P, so you may have to adjust settings to your needs. Included are some screen shots of vital print settings I used. For the spring use tree auto > organic (PLA 99 walls .20 layers worked for me)if you have bambu studio. Its a bit challenging to remove the supports but I found if you get your fingernail between the top of the spring and support you can glide your fingernail down it slowly and it will release the upper half of support, the bottom sticks a little more but if you can get it started with your snips ot something then i found i could slowly pull it outwards and it came out pretty easily.the 25cent sign is done in 2 color PLA settings in attached imageThe button I used Overture Transparent Red PETG, I had to make it thin to see the text through it. This took alot of experimenting, but I think it turned out well. Print orientation and support setting are shown in images, supports removed pretty easily.Top and bottom of case settings are also included in images. <ol><li>Put a small drop of superglue into the little round spot on bottom piece and insert the spring, let it dry.</li><li>Insert the red button into the top piece face down.</li><li>Place 25cent sign into button as shown(glue optional)</li><li>Put some super glue in the channels on the bottom piece.</li><li>Align top pieces onto the bottom piece and press together holding for a bit until super glue dries!</li></ol>&nbsp;

Retro Arcade Style Video Game Keychain/ Fidget Toy *Work In progress*

arcade

Henwi98

I want to share this nice Box from SUNSHINE (https://cults3d.com/de/modell-3d/haus/print-in-place-spring-loaded-box)Its possible to print it in place without any Support or brim. Try my profile out and let me know if its works with your printer as well.

Flipper

BTTF

Champ

arcade

sympa

Déco sympa

Pour imprimante