d46zbcpmyz

Martin Kozak

Christmas tree puzzle

节日

mcmaven

<h2>Summary</h2>This is a Motorized version of my original Triaxial Tourbillon Clock Make. The two major changes are that this version uses stepper motors to driver the carrier, and it incorporates the Triaxial Quartz Movement Upgrade. However, there are many other subtle differences from the original Triaxial design.Here is a time lapse version of the design: <a target="_blank" href="https://youtu.be/so1m_iGdigE" rel="nofollow noopener">https://youtu.be/so1m_iGdigE</a>, and a real-time video: <a target="_blank" href="https://youtu.be/2vyGcqjci-Q" rel="nofollow noopener">https://youtu.be/2vyGcqjci-Q</a>.&nbsp;Overview of my Triaxial makes:My original Triaxial Tourbillon remix (https://makerworld.com/en/models/13300) is weight driven and the STLs are versions of A26's design that I modified to add ball bearings and some other features. Given the plastic escapement parts the remix was never meant to keep correct time, also it is very inefficient so the weight only keeps it working for a couple of hours. Therefore it is not a practical clock. I designed the 'Triaxial Quartz Movement Upgrade' (https://makerworld.com/en/models/13301), which replaces the clock face in the remix, so it could be used to display the correct time when it was hanging on a wall.The weight in the Triaxial Tourbillon remix is painful to wind, so make it easier to animate I designed the Motorized Astronomia. For this Motorized Astronomia design I basically started with a clean slate. All of the parts have been redesigned, with no intention to be compatible with my original remix.&nbsp;<h2>Print Settings</h2>Printer Brand: PrusaPrinter: I3 MK3SRafts: NoSupports: YesResolution: 1.5mmInfill: 15%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA" rel="nofollow noopener">Hatchbox PLA </a>

Triaxial Motorized

创客

Matthew

Sample video:<figure class="media"></figure>My FB feed started to show me all sorts of bird feeders including some commercial options that had built in cameras. I decided I had to create my own version. It's all parametric so you can modify any of the sizes using OpenSCAD but the defaults work for both my WyzeCam v2 and v3 cameras. The white parts are PETG and the clear(ish) is polycarbonate but any outdoor-appropriate filament should be fine. It is designed so that you install the housing using screws and then the feeder/perch section lifts off for filling. In some of the clips I've uploaded, you can see everything bouncing around quite a bit… those are from version 1 which allowed the squirrels to eventually bounce the feeder/perch section off of the housing. Version 2.2 doesn't allow them to do that.The first camera I modified after watching this clip: <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Ldg1pIjrdvo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Ldg1pIjrdvo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe></div> </div>But I ended up not using the focus ring and just adjusting the lens and reassembling. Below is my video of how I modified my 2nd and 3rd camera; modify your own camera at your own risk.<figure class="media"></figure>The “cam housing test” file is provided in case you want to print just the camera housing to make sure your camera will fit (you have to take into consideration the bend in the USB cord).

Parametric Bird Feeder For Wyze Cam and Similar

自然科学

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

穿戴

WF3Dprinting

You have to print every pixel in the "desired" color. For easier printing they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.E.g.: “Light grey x4_38” This transfers to:<ul><li>Color: Light grey</li><li>Type: 4x connections</li><li>Number: Print 38 pieces of this connector in the color light grey.</li></ul>Use the image as a reference for building your pixelart. It took me around 0,5h to assemble and only ~ 40 hours to print. I recommend laying out all Pixels first and assembling it after you arranged all pixels. :)I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)&nbsp;I also made one which you can see here: <figure class="media"></figure>

Minecraft Diamond Sword

我的世界

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

实用

MEAF designs

Easy to print and fun to make!perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter is a separated file so you can print it in different colors if you want to.&nbsp;there are a couple of accesories to personalize as you like: -spider and spiderweb-witch hat (to print in multicolor just add a “filament change” at height in your slicer)-witch broom&nbsp;just print them and glue them on top! <img src="https://media.printables.com/media/prints/303320/rich_content/172ab3e6-1b61-40a9-8498-f4536890476e/9e803eff-7369-4b17-93d4-d01349663ff5.gif#%7B%22uuid%22%3A%225dca924b-d91f-47a5-988e-dde55ca77721%22%2C%22w%22%3A640%2C%22h%22%3A640%7D"> &nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,24 mmPrint time: about 7 hours total for all plates Nozzle diameter: 0,4mm or 0,6mmInfill: 10-12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit.&nbsp;You can see my other models here:<a target="_blank" href="https://www.printables.com/social/281168-dgoalva/models" rel="nofollow noopener">dgoalva | Printables.com</a>

节日

创客

自然科学

穿戴

我的世界

实用

有趣