craig.snider76

MM Printing

DescriptionThis is a Remix of Printable VELCRO by eried. I really liked his model, but you can only use it by gluing the pieces, limiting its functionality. So I added mounting tabs that can be used for straps or screws and strengthened the overall design.&nbsp;FilamentPLA - Provides a strong hold due to its stiffness, but is weak and will break and wear easily PETG - Not as good of a grip but lasts longer.ABS - IDK I haven&#39;t tested it yet.TPU - Don&#39;t use it alone, BUT if you print the base in a stiffer material such as PLA, PETG, or ABS, the top part in TPU provides the best hold and functionality.&nbsp;Print Settings<ul><li>Supports - No</li><li>Infill - 100% (it doesn&#39;t really matter)</li><li>Layer Height - 0.3 (or whatever is closest)</li></ul>Special Thanks Thanks to @3dprintsmith for doing some excellent tests and providing his results and a video. You can check that out below.Thanks to @Teaching Tech for his Parametric remix and his testing video you can check that out <a target="_blank" href="https://www.printables.com/model/568587-parametric-3d-printable-velcro" rel="nofollow noopener">HERE</a>Thanks to @strandedorg for the first tests of my model Thanks to @eried for the original conceptThanks to Prusa Printables for hosting the <a target="_blank" href="https://www.printables.com/contest/397-hook-loop-prints" rel="nofollow noopener">CONTEST</a> that inspired me to make this.<figure class="media"></figure>Coming SOON!<ul><li>Multiple Velcro sizes</li></ul>Make sure to check out my Printables account <a target="_blank" href="https://www.printables.com/@MM_Printing" rel="nofollow noopener">HERE</a>

Printable Velcro

vape products 

KiCkiN

380acp Ammo Box. Holds 50 rounds.&nbsp;Printed in PLA at 0.28 layer height

380acp Ammo Box

ammo

sika.jan

Solid stackable box 150x100x60 -inner dimensionRecommended print from PET-G

Solid stackable box 150x100x60 (inner dimension)

garage

Jerry

Humble thimble in TPU for save your finger while sewing. &nbsp;&nbsp;

Humble Thimble - TPU

Bertram 

Ukdavewood

Remix of PaulDirac314's case <a href="https://www.printables.com/model/592736-iphone-15-pro-max-minimalist-case." rel="nofollow">https://www.printables.com/model/592736-iphone-15-pro-max-minimalist-case.</a> Adding a credit card pouch at the back, plus adding a lip at the front so that print stays put when printed in TPU.As the TPU has a 90 degree overhang and I wanted to print it on a Bambu Lab X1c - with PLA support - I actually designed a PLA insert that needs to be inserted into the print when it is a layer 50. The PLA support part can then be easily removed after the printing is complete.NB/ This version is not compatible with MagSafe chargers or mounts. I will probably make another version with the credit card part not included or detachable.3mf files included will only work with Bambu Studio or Orca Slicer.Instructions<ol><li>Print PLA support section in PLA</li><li>Slice TPU section at 0.2mm layer height and include a pause a the beginning of layer 50</li><li>Start the TPU print</li><li>Insert the PLA section - which should slot into the holes at the side - feel it with finger to check that the top is the same height as the TPU print</li><li>Restart the print</li><li>Remove print and gently pull the overlapped TPU off of the the top of the PLA support section, remove the PLA section and discard (or use for another print).</li></ol>

Iphone 15 Pro Max case - TPU supported by PLA - with Credit card holder

iphone

DedalusHunter

Cute Business Card Holder for Retro Gaming fans and ethusiasts! All the parts of the model are recolourable, starting from the buttons, to the screen border and ever the base. It can be made to house a logo or a written slogan on the base, and it's perfect to use either in a shop, a stall, or even in your home to store all the business cards from your favorite restaurants, shops and much more.Business card holder dimension 85mm x 55 mm Dimension Body: 100mm x 140mm x 30mm Base: 51mm x 85mm x 25mm I recommend inserting some heavy material inside the base to prevent it from tipping over.For example, in the prototype I used concrete and stones.

Retro style business card holder

business card holder 

danshti

<h3>Model</h3>This lamp is designed for the Bambu Lab <a target="_blank" href="https://makerworld.com/sv/models/13717#profileId-13429" rel="nofollow noopener">LED Lamp 001</a> kit.<figure class="image image_resized image-style-side" style="width:319px;"><img src="https://makerworld.bblmw.com/makerworld/draft/464401/2023-11-10_1c9dd46d9841e.jpg"></figure>_______________________________________________________________________________________________ElectronicsThe electronics from the LED Lamp 001 kit can be used to light this lamp. Another alternative I found is a similar looking LED on <a target="_blank" href="https://www.aliexpress.us/item/3256805181920290.html?spm=a2g0o.productlist.main.3.3e9dwy0iwy0iRT&algo_pvid=b089adcb-e6ce-494d-b6fa-20e31744496c&algo_exp_id=b089adcb-e6ce-494d-b6fa-20e31744496c-1&pdp_npi=4%40dis%21EUR%2111.73%215.98%21%21%2112.22%21%21%40211b812f16996285382538521e6673%2112000032765487227%21sea%21DE%21762140752%21&curPageLogUid=13Tru9VcuDQt&gatewayAdapt=deu2usa4itemAdapt" rel="nofollow noopener">Aliexpress </a>. This LED seems do have a similar diameter and should be fine, but I have not checked it yet.&nbsp;PrintingThe empire logo is already in the print profile. The Logo can be scaled or removed, if you like. Also, you can change the colour of the logo. For that you have to rightklick on the empire logo in the Bambu Studio object view and klick on the filament of your choice. <img src="https://makerworld.bblmw.com/makerworld/draft/464401/2023-11-10_cceea65bde05f.png">&nbsp;The white blend is in the print profile as well. I printied it just like it is in the profile and it worked fine for me, but you can open it in a separate project and print in the spiral mode, although keep in mind that the bottom of the blend will be filled with a layer in the spiral mode.&nbsp;For better looking seams a good K-factor is recommended. I printed the shell without support and it worked fine, but depending on your past experience and filament you can turn on support.____________________________________________________________________________________________________________________________________________________I hope you like this lamp and enjoy it! Feel free to comment any tips or results!

Star Wars inspired 001 Lamp

star wars

JSHuiting

Fan shroud for 1/10 competition RC cars, forces the air around and trough the motor. Fits all 40mm fans but only with the use of MR33's fan mount.&nbsp;Made specifically for Awesomatix A800 models, but should fit Xray, Tamiya and most other chassis with the motor mounted in a perpendicular way.

40MM Fan Shroud

RC Car

Meister Edel

Heyho :)After several clotheslines have already broken because they were previously simply knotted to the hooks / eyelets, I have a small 3D printable alternative for fastening:Advantages:The main load of the clothesline is no longer on a small radius, but on a large one. This prevents it from having to absorb large frictional forces at only a small point, which would otherwise tend to peel off the plastic sheathing.The ends can be attached without having to tie knots. (Simply thread through the 2 holes as shown in the picture)Several rows of lines can be connected together and thus tension each other.<figure class="image image_resized image-style-align-center" style="width:43.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/253516/2023-12-07_5i3kyatuhqxm.png"></figure><figure class="image image_resized" style="width:66.1%;"></figure>Scalability:My clothesline was approx. 4.5 mm in diameter. However, as all parts are printed, you can also flexibly adapt the clothesline in your slicer to other diameters or applications!<figure class="image image_resized image-style-align-center" style="width:63.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/253516/2023-12-07_152u14tft1xd.jpg"></figure>&nbsp;2 versions:Eyelet: In this version, the bracket is printed in 2 parts and can then also be mounted in eyelets. The U-shape should be pressed all the way down to the ground so that it snaps in properly! This can take some force.Hook: Here you can simply attach the washing line to the hook. Advantageous if you want to remove the line from time to time!&nbsp;Printing Tipps:For best durability use 5-6 Perimeter (with a 0,4 mm Nozzle) and 100% Infill. As Material I would recommend sth. like PETG, ASA or other stuff materials that will not deform over time.<figure class="image image_resized image-style-align-center" style="width:64.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/253516/2023-12-07_ppyk00fd5ngy.jpg"></figure>&nbsp;Have fun!&nbsp;

Clothesline / Rope Hanger 4 Hooks & Eyelets laundry

close line 

YelTrik Designs - Click FOLLOW

A1 AMS Lite Hub X1/P1 Adapter Kit&nbsp;This is a complete kit to transform the A1 AMS Lite Hub into a X1 and P1 AMS Hub. Why spend $50 when you can spend 0.26 cents in filament and $5.99 for the A1 AMS Lite Hub?&nbsp;Benefits &amp; Features<ul><li>Complete Kit</li><li>Silky Smooth</li><li>Precision Aligned To AMS Buffer</li><li>No Induced Feed or Pull Back Errors</li><li>Significantly Less Expensive</li><li>Simple Print - No Supports</li><li>Simple Installation</li><li>Easy To Remove In Needed</li></ul>Kit Includes<ul><li>Buffer Release Button</li><li>A1 AMS Hub Adapter</li><li>Alignment Fixture Bracket</li></ul>NOTE: Installation of the Buffer Release Button is required to remove the A1 AMS Hub Adapter.&nbsp;<figure class="image image_resized" style="width: 43.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092650/design/2023-12-13_bf9679310cf7a.jpg"></figure>Install the Buffer Release Button<figure class="image image_resized" style="width: 42.94%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092650/design/2023-12-13_be9ecfe72a47f8.jpg"></figure>After cutting off the tab, install the A1 AMS Lite Hub into the adapter (Insert and Twist)Push the adapter nozzle into the AMS Buffer until fully seated<figure class="image image_resized" style="width: 42.89%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092650/design/2023-12-13_e5ca697aac611.jpg"></figure>Install the bracket and screw. It&#39;s the same screw as the screwsused for the spool arm. It&#39;s total length is 9.87mm, OD is 2.85mm)

A1 AMS Hub X1/P1 Adapter Kit

TigressAndFox

Originally posted at <a target="_blank" href="https://www.thingiverse.com/thing:5754524" rel="nofollow noopener">https://www.thingiverse.com/thing:5754524</a> by myself (the fox in tigress and fox).&nbsp;This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for Token cards and such.It fits in most of the deck box cases my friends and I have.Closed it is about 3&#34; x 3&#34; x 3.87&#34;Supports are not requiredI generally print mine in .12 as I&#39;m not strapped for time on my prints. .2 turns out fine as well though with some of the steps on the angles of the lid and base being more noticeable.

KrakenBox - a MTG Commander Deck Box

card holders

fb-artwork

A miniature for tabletop players showing a human male Wizard.The miniature comes in 3 variations:&nbsp;- with round base (_rb)- with square base (_sb)- with hexagonal base (_hb)&nbsp;As the model needs support, I used “Tree slim”.&nbsp;Feel free to click the like button if you enjoy my miniatures.Support me and become part of the club on steady: <a target="_blank" href="https://steadyhq.com/fb-artwork" rel="nofollow noopener">https://steadyhq.com/fb-artwork</a>

Dnd Miniature Human male Wizard

miniatures 

K2_Kevin

Based on the “sturdy and stylish” small and scalable Rugged Desktop Organizer is now GRIDFINITY COMPATIBLE

Rugged Organizer Gridfinity 2x2

Gridfinity

Encrust3d

1/26/2026 update: u/Flyrockets informed me of an error that is occurring on Firmware 01.01.50.24 (beta tester firmware) that the nozzle will hit the build plate aligner after the third layer and cause an error, causing the print to stop. I have updated this design to lower the aligner to be 0.5mm above the Textured PEI build plate vs the 3mm it was previously. This shouldn't cause any errors as the third layer should be over 0.5mm in most cases, but I do not have the 01.01.50.24 firmware to confirm. Please let me know if you experience any errors while using this updated design and I will update it again. To easily remove your build plate aligner and update to the new one, remove the old build plate aligner starting with the lober side and simply push it down and off the heat bed.&nbsp;If you are enrolled in the beta firmware program with Bambu, please check your printer firmware before printing. If you are enrolled in the beta firmware program with Bambu, you will need the updated design. If you are not part of the beta firmware program, the original design will work great for you if your firmware is 01.01.01.00 (stock firmware)&nbsp;This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear corner of the A1 heatbed to help align the build plate. This build plate aligner prints in less than 20 minutes and uses less than five grams of filament. This design has been tested to ensure it does not interfere with bed leveling or nozzle cleaning. This design needs to be printed in the orientation I have uploaded it in for proper fit.&nbsp;You can not mirror this design and use it on the left rear side of the bed. The nozzle will hit it when changing filaments or cleaning the nozzle and cause the print to stop.&nbsp;Printing in PLA works, but PETG is the better material to use for this aligner. If you find this model to be a little loose, it is to ensure it can be removed from your bed if you do not want it on anymore. I had numerous versions of this that fit perfectly but had to be cut off to be removed. I do not want you to have to cut this off of your printer if you want it removed.&nbsp;If you are interested in a A1 heatbed cable support clip, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/118957#profileId-127976" rel="nofollow noopener">https://makerworld.com/en/models/118957#profileId-127976</a>&nbsp;

A1 Build Plate Aligner

玉兔

化妆盒

organizer

D-Louie Designs

This can easily be scaled up or down depending on what you'd like to use it for.

Drink Up Witches!

yule

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. They are up to date with whatever changes I make. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE 24 Nov 2023</h3>Previous writeup - “…One of the ideas was to attach a bin/basket on the end of the cantilever x-axis. But based on experience with cantilever printers, it is never a good idea to hang a bin/basket at the extreme end of the X-axis extrusion, regardless of how robust the Z-axis linear rail is… ”&nbsp;I was not entirely right. While hanging a bin/basket at the end of a cantilever was never a good idea, attaching a lightweight guide/baffle is a very good idea. I looked at the designs by others and CAD what I think is a combination of what was good. Together with a shorter bin, I added Option 3 - Short Bin with <a target="_blank" href="https://makerworld.com/en/models/72654#profileId-77178" rel="nofollow noopener">Pruge Guide</a>. I have updated this project's 3mf file.&nbsp;The short bin uses the same magnetic docking system. So you will still need to print the magnetic docks D1 (plate 1).&nbsp;In addition, I have also increased the capacity of the bin without an increase in footprint.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_0bf6f9d142792.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_ab21b4e9da909.png"></figure></td></tr></tbody></table></figure>&nbsp;This is the first of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer.<ol><li>A1 mini Poop Management System (PMS)</li><li><a target="_blank" href="https://makerworld.com/en/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.&nbsp;The price is 10€ with tracked shipping at 5€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labour are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. A small royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, software subscription, etc&nbsp;<h3>INTRODUCTION</h3>While unboxing my A1 mini combo, I noticed it needs a Poop Management System (PMS) to collect the filament poop during purging.The simple yet futuristic design of the A1 mini fuels my imagination and hence, my design for the PMS takes on the look and feel of a space station and docking bay.As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing PMS:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use.</li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Will not cause accidental purge clogging</li><li>No support needed</li><li>Printed in PLA.</li></ul>&nbsp;There are 3 PMS options:<ul><li>Option 1 - An eco-friendly design using the filament cardboard box as a ReCycle PMS.</li><li>Option 2A - A fully printed Bin</li><li>Option 2B - For users who print extensively, a printed Chute to guide the poop down into your regular waste bin</li><li>Option 3 - A short bin with a purge guide/baffle that is attached to the purge wiper (recommended)</li></ul>&nbsp;You will need to print a pair of docking bays (D-1) which the PMS will be connected to the A1 mini printer.All the above PMS are magnetically attached with Ø6x3 magnets to the D-1 docking bays.The D-1 will be secured to the A1 mini printer using VHB tapes (or similar mounting tape that is 1mm in thickness).&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-25_64c946113b006.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_7c8a4c70fff1a.png"></figure>&nbsp;<h3>BOM</h3><ol><li>Ø6x3 magnets - 8pcs</li><li>1mm VHB tape (10x20mm) - 4pcs</li><li>Thin double-sided tape - For ReCycle Bin only</li></ol>** Note that the VHB tape (or any double-sided tape) has to be 1mm thick. This is because the recess I made is 0.8mm, allowing the dock to flush with the printer.&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings.The STLs are also available in folders.I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.Print plate 1 - Docking bracket. Both front and back docking brackets are required.Print either Option 1, 2A/2B or 3 depending on the configuration you want.If you are using Option 2A/2B. You will need to print plate 3 - Shield top.If you are using Option 3, you will need to print plates 6 & 7<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_75bf1beab3e79.png"></figure>&nbsp;Docking Bracket (D-1)<ul><li>Press fit the Ø6x3mm magnets into the docking bracket. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_1a49a648dbdd6.png"></figure>&nbsp;<ul><li>Paste the VHB tapes onto the docking bracket.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_4c335b1b1604d.png"></figure>&nbsp;Option 1 - ReCycle Bin<ul><li>Press fit the Ø6x3mm magnets into the ReCycle brackets. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_m65ncfzfjsze.png"></figure>&nbsp;<ul><li>To attach the spool box, place double-sided tapes on the inner side of ReCycle brackets.</li><li>The dimension of the bracket is based on Bambu Lab filament with spool cardboard box. There might be some size differences with other brands' boxes, but the double-sided tape should hold it well.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_vwvwl5p02bed.png"></figure>&nbsp;<ul><li>Cut the spool box according to the dimensions as seen in the image. No more than 55mm from the bottom and no less than 100mm wide.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_3mxezvsmjkis.png"></figure>&nbsp;<ul><li>Install spool box to ReCycle brackets</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_mrjcdjvanqw3.png"></figure>&nbsp;Option 2A Bin & 2B Chute<ul><li>Press fit the Ø6x3mm magnets into the bottom piece. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_1lf2xxu3vhu2.png"></figure>&nbsp;<ul><li>Glue the top and bottom pieces together. The tongue and grove design will assist in alignment.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_fm7yr0fxfedn.png"></figure>&nbsp;Option 3 - Short Bin with Pruge Guide<ul><li>In addition to plate 1, you have to print plates 6 & 7.</li><li>Install the magnets the same way as all the other bins</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li></ul><figure class="image image_resized" style="width:477.812px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_9f22dcecbc243.png"></figure><ul><li>Install image</li></ul><figure class="image image_resized" style="width:477.571px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_6724c482cd6c7.jpg"></figure>&nbsp;&nbsp;Installing to the Printer<ul><li>Home and turn off printer. Push the toolhead all the way to the left of the X-gantry.</li><li>Attach the D-1 brackets to the ReCycle/Bin/Chute.</li><li>Align it with the X-gantry, make sure the poop will drop into the ReCycle/Bin/Chute and stick the D-1 bracket to the printer body.</li><li>Note that part of the D-1 bracket will slide under the printer.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_5900afd4bb049.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_qv4fqhizk58s.jpg"></figure><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_ciofeugx7tly.jpg"></figure>&nbsp;<ul><li>Turn on the printer and do a homing. Watch and check. The poop shooter should not be pressing down on any part during homing.</li><li>Enjoy a neat and poop-less work table.</li></ul>&nbsp;<h3>VIDS & PICS</h3>Modbot showcased the ReCycle bin version on his A1 stream. Scroll to 26 minutes to see how it works.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Fks_nOL2eys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Fks_nOL2eys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Modbot showcased the bin version 2A, the build plate holder and the stylus+scraper holder.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=P4EphELNuw8&t=211s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/P4EphELNuw8?start=211" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like what I designed and want to contribute to my coffee addiction, software subscription and filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells)&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 Mini Purge Bucket Bin Poop Management System Bambu Lab

first prints

Preischl 3D

Do you like my designs? I would be happy if you would support me by joining my Printables club! :) (already from 3$) It also gives you access to exclusive models ;) https://www.printables.com/@Preischl3D Or do you want a sales licence? Then you can book the commercial tier!&nbsp;All models I publish are tested by me and my community before I publish them.Here you get a very practical hexagonal dice box that has been designed so that you can insert round 5x5mm magnets. This gives a secure hold of the lid for transport and looks super sexy.

Hexagon Dice Box With Magnets

can sell

emilskibsted

I wanted to print a game of Ships Battle, but could not find any project files for it on MakerWorld, so thought I'd post it.&nbsp;*** Want another classic game? See my new travel chess game: <a target="_blank" href="https://makerworld.com/en/models/247953#profileId-264188" rel="nofollow noopener">Travel-Chess 2.0 Remixed by emilskibsted - MakerWorld</a> ***&nbsp;Changes: - Resized everything, so it all fits together perfectly on my P1S. - Added some colors where I thought it would be nice. - Added a tweezer for easy pin pickup when lost in the sea :) - Made various settings regarding infill, ironing etc. which worked the best for me.&nbsp;Complete printing time: 21H 5m&nbsp;Wiki about the original game: <a target="_blank" href="https://en.wikipedia.org/wiki/Battleship_(game)" rel="nofollow noopener">https://en.wikipedia.org/wiki/Battleship_(game)</a>&nbsp;Have fun, and please throw a like :)

Ships Battle Game

games

Sevro

OverviewFoldable Question Block from Mario. I developed this kind of foldable printed box for other project and I decided to do another model with this fold idea.InstructionAfter print you have to fold it properly. It may by a little challenging for some .Do not use old brittle filament as the tabs may break off.Check if your printer has good calibration of elefant foot. If elefant foot is to big then the holes for the hooks will be too small.For color change use swap filament on certain layer.&nbsp;Have Fun

Question Block

things to print 

BODY3D

If you like my work, support me by leaving a like !Get access to really cool models every months on my PatreonAnd don't Forget to Follow me !<a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener"><img src="https://dreamityourselfmusician.com/wp-content/uploads/2020/10/patreon-france.jpg" alt="BODY3D"></a><a target="_blank" href="https://www.tiktok.com/@body_3d" rel="nofollow noopener"><img src="https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSrfIHeAYT6KeLQTVHxvXORYsILY6oVXlNVmg&usqp=CAU" alt="BODY3D"></a> <a target="_blank" href="https://cults3d.com/en/users/BODY3D/3d-models" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_6b0967a6c4cbc.png"></a> <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_63b5664660755.png"></a>

Gnome ( Christmas tree )

xmas

squinn

A helpful display stand for holding all of the filament swatch samples that come bundled with the A1 Mini, or your own collection of favorite filaments. This is an easy print (no supports or brim are required), and then the swatches simply snap-in. After they're snapped-in, the swatches can be simply flipped to one side or the other, which provides a convenient way to mark the color you'd like to use in your next print.&nbsp;Two different sizes are provided. The small version can hold up to 40 swatches, and the large version can hold up to 80. Also included is an optional spinning base piece, allowing you to give the whole assembly a fun twirl. Use this with the official filament swatches from Bambu Lab, or print your own in whatever filament you'd like using the provided swatch model.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/127602/2023-10-17_9db1b08510ebb.gif"></figure>