cousas3d

LongBeachRaider

This is my go to fidget spinner and I have an entire bowl of them! Prints fast and clean. Can be used in just one hand, which is really the key with a good fidget toy. Being able to use the mouse while fidgeting is really the gold standard. ENJOY!

Gear Fidget Spinner

Juguetes

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Taller

Vejstrk

<h2>Planes Kit Card</h2>I have designed several kits of my favourite aircraft.&nbsp;All planes are 10 cm long.&nbsp;The kit cards are designed so that the individual parts are easy to break off and also easy to assemble. The individual parts are joined together by sliding or clipping.&nbsp;If there is interest in these aircraft kits, I will add here more as time goes on.&nbsp;They are currently available: F-16 Falcon  P-51 Mustang Spitfire MK I F-35 Lightning II SR-71 BlackbirdConcordeJAS-39 GripenEurofighter Typhoon<figure class="image image_resized" style="width:55.52%;"><img src="https://makerworld.bblmw.com/makerworld/draft/601449/2024-03-02_24c8c94823529.jpg"></figure>

Planes Kit Card

kit card

Ragnar 3D

Daimler Benz World War I truck.&nbsp;Simple print, minimum supports.&nbsp;The connection is made with an unused filament and some glue.&nbsp;Simplified for easy printing.

Daimler Benz WW1 Truck

Maquetas

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.&nbsp;Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm&#39;s minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don&#39;t need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.&nbsp;Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm&#39;s version of Batman.&nbsp;Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!<h3>IMPORTANT</h3>Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.<h3>PRINTING &amp; ASSEMBLY INSTRUCTIONS</h3><ol><li>Select between the available scales:<ol><li>1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle</li><li>1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle). <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_df179fb2a4986.png"></li></ol></li><li>Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already. The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in. </li><li>Use glue/adhesive to attach the parts. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_23c8734f34f18.jpg"> </li><li>BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.</li></ol><h3>FILAMENTS USED</h3><ul><li>cowl, cape, boots: Polymaker Polyterra Charcoal Black</li><li>belt: Savannah Yellow</li><li>body: Matter Hackers Build PLA Silver</li><li>eyes: Inland PLA White</li><li>face: Inland PLA Pastel Pink</li></ul>

Batman Animated / Justice League Unlimited Figure

Figuras

urbanovipeter

This is a three part Shadow Dragger. After printing, use glue to join. Have fun!&nbsp;

CS GO Shadow Dagger

Cosplay/Props

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Made this Headset stand of spiderman. Printet like a boss and now i have a cool place to store my headset slicer says floating object, just ignore this , it will print fine 0.2mm layerhight. No support. lightning infill 15 %. gyriod infill for the buttom part. 3 walls Make sure to check out my other headset stands. * Black Panther - https://makerworld.com/en/models/176323#profileId-193839 **Thanos - https://makerworld.com/en/models/162344#profileId-178199 ***Iron man - https://makerworld.com/en/models/126398#profileId-136594 ****Dead Pool - https://makerworld.com/en/models/140981#profileId-153593 Happy Printing

Spiderman Headset Stand

Accesorios Consolas

Mitchell Bernal

Ams Lite adapter for Sunlu spools.Easy removal and placement because of ridges to grip and larger threads.You can print in Sport mode.The thicker cap goes on the outside of spool when placed.&nbsp;A remix/change of <a target="_blank" href="https://www.printables.com/de/@chuyskywalker" rel="nofollow noopener">chuyskywalker</a>´s “Desiccant Spool Tumbler” which is a remix from Humebeam´s “Adjustable Spool Holder” and <a target="_blank" href="https://makerworld.com/en/u/577879540" rel="nofollow noopener">Ambossa3D</a> Desiccant Spool Tumbler for Sunlu-Spools.

Sunlu/Geeetech Adapter AMS Lite easy removal and placement 

Bambu AMS

Reuter_Corp.

NEW smaler version here →<a target="_blank" href="https://makerworld.com/en/models/138220#profileId-150513" rel="nofollow noopener">https://makerworld.com/en/models/138220#profileId-150513</a>&nbsp;REVISION : some details were missing on Plate 1,2 and 4. I did the corrections. Sorry for my bad, Thanks a lot !!&nbsp;Wall Art - Tree&nbsp;10mm thick, can be adjust in Bambustudio if you want smaler tickness.&nbsp;&nbsp;

Wall Art - Tree 

Wall Art

gare-sb

Stitch LED LightboxI made 2 versions. 1 time for an LED strip to be laid out with a USB connection, the second version with an on-off switch for 9V operation

Stitch LED Lightbox

LightBox

Gyroid

<a target="_blank" href="https://makerworld.com/en/models/177852#profileId-195692" rel="nofollow noopener">v2 out now! Stronger with less flex and only slightly more filament.</a>&nbsp;Looking for a reusable spool with 4 different infill patterns on the same spool? <a target="_blank" href="https://makerworld.com/en/models/152830#profileId-166926" rel="nofollow noopener">Check out my latest model here.</a>&nbsp;---&nbsp;Calling all gyroid bros!&nbsp;&nbsp;Gyroid infill is all the rage. It's the strongest and coolest infill style, so why not have it on display while your filament spools rotate?&nbsp;&nbsp;Well now you can!&nbsp;&nbsp;Introducing my Bambu Lab Reusable Spool remix with visible gyroid pattern. This fully supports all Bambu Lab refills.&nbsp;&nbsp;This remix is based off the official Bambu Lab reusable spool model, so it functions exactly like the official spool, except has the added benefit of a very cool gyroid pattern holding it all together! It also uses significantly less filament.&nbsp;&nbsp;Not enough gyroid for you? Well guess what? The infill of the solid parts is also gyroid! An absolute must for all gyroid fanboys (and girls) to show off your obsession.&nbsp;&nbsp;Can I change any settings?I would strongly advise you to NOT change any settings or modifiers in the print profile. I've spent a lot of time getting the right balance of strength and coolness, so each setting is there for a reason. The only settings you can change are filament settings if you want to print in something other than PLA.&nbsp;&nbsp;What's the best filament to print this in?PLA, PLA+, PLA Tough etc. are my favs here. To preserve the strength, it must print well and these print the best without missing a beat. If you dry a lot of filament, print them in PETG or ABS to avoid warping in filament dryers. Do not put this in a filament dryer if you printed using PLA or PLA variants!&nbsp;&nbsp;Why doesn't the gyroid pattern cover the whole side?Alright, calm down, I know you want maximum gyroid but there are some limitations! I tried many prints with gyroid the whole way around but unfortunately some solid parts are needed or the spool is way too flexible. This is the best of both worlds - strength and plenty of gyroid. If anyone wants this model I can add it - just leave a comment.&nbsp;&nbsp;When I attach the spools, I can hear clicking. Should I be worried?No, this is normal! The RFID tag may gently scrape against the gyroid pattern when closing the spool. Just keep going until it clicks in place.&nbsp;&nbsp;Will this block my RFID readability?Nope! Your AMS will read the tags fine with this reusable spool.&nbsp;&nbsp;Do I need to use the spacing shim?It's been added as a 3rd plate because the official Bambu Lab version uses it. I have never need it personally so I don't bother, but you can use it if you like.&nbsp;&nbsp;&nbsp;Please let me know what you think and let's see some photos showing off your super cool gyroid pattern spools!

GYROID Pattern Reusable Spool - Bambu Lab Refill Compatible - Filament Saver

Utiles

braga3dprint

Introducing the "KTM Racing" Lettering Decoration – a versatile and stylish addition to your space. This 3D model features the iconic "KTM Racing" lettering, making it an ideal choice for KTM enthusiasts or anyone looking to add a sporty touch to their decor. Whether you want to use it as a door sign with double-sided tape or simply display it on your wall, this decoration is designed to impress. Its sleek and modern design will effortlessly complement any room, and its 3D printed quality ensures durability and precision. Elevate your space with the spirit of KTM racing – get your "KTM Racing" Lettering Decoration today.

KTM racing decoration

Marcas

tufactoria3d

This is my design of a mechanical heart using the software HUEFORGE. Perfect for a gift or decor your room. Please print at 0.08 layer height. The file also includes the .amf with all the color changes but also here you have the note:&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Gray At layer #9 (0.8mm) swap to Light Gray At layer #14 (1.2mm) swap to White for the rest.&nbsp;

Mechanical Heart HUEFORGE

HueForge

fay3dlab

So i just got myself the LED lamp kit and was looking for a cool lamp shades to print for it.. then i came across someone making a incubator like cylinder with an alien in the middle using resin.. i thought it was a great idea.. and so i design one for myself.. but of cause i want to make a suspended version of it.. Then i remembered finding a baby raptor model on makerworld.. it was made for resin printing.. so i low-poly the raptor and added the baby raptor blue and turned it into a suspended model.. i had to split the raptor in 2 and added supports to the hanging hands.. legs and tail.. so it might look weird if you look closely..&nbsp;<figure class="table"><table><tbody><tr><td>:UPDATE: it turns out that the user who shared the raptor model on makerworld is not the owner of the 3D model.. he shared the file without authorization.. The owner reached out to me and told me what the user had done.. the owner of the 3d model is <a target="_blank" href="https://www.turbosquid.com/Search/Artists/wofle" rel="nofollow noopener">wofle</a> from turbosquid.com.. and he gave me permission to share my remixed version of the raptor as long i dont sell it commercially.. so thank you Mr Wolfe for sponsoring your awesome raptor model for my suspended models..</td></tr></tbody></table></figure> i modelled the incubator using Tinkercad and added the LED kit on the bottom.. so the LED light would shine through the bottom grill of the incubator cylinder and light the suspended baby raptor in the middle..<img src="https://makerworld.bblmw.com/makerworld/draft/681411/2023-12-15_2b30871ab39c9.gif"> If you have an AMS i recommend printing some of the incubator parts with transparent filament like i did for the bottom base.. so that the LED would shine through it and make it more cool.. in my opinion.. Assembly is fairly simple.. you just need to be careful when adding the square peg into the raptor's body.. it should fit loosely.. the peg is just used to hold the 2 half of the raptor aligned.. the bottom parts should fit tight.. and the top slightly loose.. the base where you insert the LED kit should fit loosely to the middle base.. so that you can turn your raptor to whichever position you'd like without the wires in the way..  <blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote><figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Baby Raptor Incubator LED Lamp

Peliculas

Williams Industries

Both plates included in the file, one main, the other is the backside. Opening was done in BS so you can edit it to your liking.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Patreon includes commercial use on all prints.

This is the way lightbox 

StarWars

DeepSouth3DPrints

Merry Christmas Gnome Door Corner!&nbsp;I've uploaded two print profiles for the model to be printedFace Down on the build plate which will give the model a clean textured lookwhen using the gold pei plate!&nbsp;Please give it a like! It helps getting noticed forothers to enjoy. Thanks andMerry Christmas!&nbsp;You can find my other Christmas decorations <a target="_blank" href="https://makerworld.com/en/u/1201824007/collections/122929" rel="nofollow noopener">here</a>

Merry Christmas Gnome Door Corner

Decoración Navideña

SprocketStudios

Update January 25, 2024: A new version of this model has been released! It prints much cleaner at the bottom, and has the same threading. <a target="_blank" href="https://makerworld.com/en/models/156286" rel="nofollow noopener">Check it out here</a>. &nbsp;This is a large threaded egg. It was designed to be large enough to hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a> (printed at the default size). Looks particularly good in multicolor coextruded filaments.&nbsp;It will print OK without supports, but the bottom points of some of the scales get a bit messy.&nbsp;Update January 5, 2024: There is a new “revised” version which aims to address some of the issues with the messy early layers. It's not perfect by any means, but it has a wider base which is less prone to issues. There is also improved alignment of the lower scales.&nbsp;If you would like to print this model for commercial use you must purchase a license here: https://thangs.com/designer/Sprocket%20Studios