corey.coldren

Shaladdin

The content is too long and has been truncated<h3>UPDATES: </h3><ol><li>April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 </li><li>April 7th: Added “wireless test jig” to help with assembled coil testing before installing the enclosure. Simply mount the transmitter box into the allotted space and align the receiver box on the debossed corner. The receiver coil should be over the non-perforated region of the base.</li></ol>&nbsp;<h3>WIRELESS POWER:</h3>The major change here is that I added an wireless receiver module to the bottom of the assembly coupled with a wireless transmitter module for installation under the unit. Alignment between the receiver and transmitter was determined via a 3D scan of the X1C and should be as close to perfect as you can get in X, Y, and Z (z-distance matters as much as X and Y). Everything is magnet or friction fit installable and requires no modification to the printer housing. Power is supplied via an external micro-USB port and the instructions provide parts for a completely solder-free assembly.&nbsp;<blockquote><h3>V2 BENTO BOX</h3></blockquote><h4>Printed Parts</h4><img src="https://media.printables.com/media/prints/441292/rich_content/c0d6f796-272f-4751-ac15-fa03239faba4/img_7017.jpg#%7B%22uuid%22%3A%229fb71a34-744a-4e9d-97ac-e1edd5a9128e%22%2C%22w%22%3A3024%2C%22h%22%3A3080%7D"><a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3680548_9b004fe9-5dd0-4438-bd7a-5b5bcad13a1b/v2-fan-duct-6x3-magnets.stl#_ga=2.134296567.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Fan Duct 6x3 magnets</a> or <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3680554_b56842cf-9a8d-4681-bc07-83396119356e/v2-fan-duct-4x2-magnets.stl#_ga=2.163500986.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Fan Duct 4x2 magnets</a> <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3673040_f1846844-eb80-40ab-bf7c-810bbd5d0784/v2-receiver-box-6x3-magnets.stl#_ga=2.88019870.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Receiver Box 6x3 magnets</a> or <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3673038_fcd6b159-8c7e-43fc-b3d5-d10d73b5bda7/v2-receiver-box-4x2-magnets.stl#_ga=2.88019870.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Receiver Box 4x2 magnets</a> <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3646170_d0a521b5-3a20-4a47-ac4f-f89ee7ede91c/transmitter-box.stl#_ga=2.134142728.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Wireless Transmitter Box</a> <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3646164_3b73877c-6e2f-4c05-8fee-ad4c27f683ba/transmitter-cover.stl#_ga=2.134142728.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Wireless Transmitter Cover</a> (OPTIONAL) <a target="_blank" href="https://files.printables.com/media/prints/441292/stls/3677936_b1abc785-1e6c-4fa0-9f3b-a8c696074c37/wireless-test-jig.stl#_ga=2.87495838.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Wireless Test Jig</a> (From Bento Box Creator) <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703595_18dadacd-8ffa-4af9-905f-52ba74229daf/cover_voronoi.stl#_ga=2.121640845.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Cover_voronoi</a> or <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703596_6fa11d41-991e-4746-8d8a-d70a6c5cd38b/cover_hemp.stl#_ga=2.121640845.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Cover_hemp</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703599_0fe43fbf-a552-4973-b18a-b193a00eca42/hepa.stl#_ga=2.121640845.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Hepa</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703598_3b991247-391e-4334-b5db-f7212cacf8fb/carbon.stl#_ga=2.121640845.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Carbon</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703594_11162765-5374-4024-8cb5-9d190531b38e/fan-case.stl#_ga=2.121640845.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">Fan case</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703641_cc99a267-0bac-4e4c-a4e9-5c3005130aed/cmag-case-01-v5.stl#_ga=2.97066137.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">CMag Case 01</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703642_ad2bbb50-7d5a-412c-ab78-f83892b520a7/cmag-case-02-v5.stl#_ga=2.97066137.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">CMag Case 02</a> 4x <a target="_blank" href="https://files.printables.com/media/prints/272525/stls/3703725_51d0f8af-3b0c-42c4-ba9f-b49edf36744d/net_infill-x4.stl#_ga=2.97066137.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">net_infill</a> <a target="_blank" href="https://files.printables.com/media/prints/272525/other_files/3601436_ac80877f-cac7-4656-8568-3c8016214247/bentobox20-user-guide-20230328.pdf#_ga=2.194371371.725068793.1679679526-1429438165.1676352081" rel="nofollow noopener">BentoBox20 User Guide</a>&nbsp;<h4>Materials</h4><img src="https://media.printables.com/media/prints/441292/rich_content/7e95b8bc-4998-4b72-8ed3-3918ad699616/img_e7021.jpg#%7B%22uuid%22%3A%2246e184f1-d3f3-44bc-a6ad-0eb575ae44d6%22%2C%22w%22%3A3024%2C%22h%22%3A3024%7D"><a target="_blank" href="https://a.co/d/dVpMdqg" rel="nofollow noopener">12V 4020 Fans</a> or <a target="_blank" href="https://a.co/d/bZGXhRo" rel="nofollow noopener">24V 4020 Fans</a> <a target="_blank" href="https://a.co/d/dH3Ydpi" rel="nofollow noopener">Wireless Receiver</a> <a target="_blank" href="https://a.co/d/2RdgzDg" rel="nofollow noopener">Wireless Transmitter</a> <a target="_blank" href="https://a.co/d/c3Pz0x4" rel="nofollow noopener">Booster Converter 3-35V with LED Voltmeter</a> (alternate: <a target="_blank" href="https://a.co/d/hpb202r" rel="nofollow noopener">source 1</a>, <a target="_blank" href="https://a.co/d/73EDrmW" rel="nofollow noopener">source 2</a>) <a target="_blank" href="https://a.co/d/ey5krA9" rel="nofollow noopener">Wire Connector (for solder-free option)</a> <a target="_blank" href="https://a.co/d/gDUBYnk" rel="nofollow noopener">USB Charger (minimum 2A)</a> <a target="_blank" href="https://a.co/d/dNZDyBB" rel="nofollow noopener">Flat micro-USB to USB A cable</a> <a target="_blank" href="https://a.co/d/iC1uAFZ" rel="nofollow noopener">6mmx3mm disc magnets</a> or <a target="_blank" href="https://a.co/d/2CWlMRc" rel="nofollow noopener">4mmx2mm disc magnets</a> (depending on version) <a target="_blank" href="https://a.co/d/5UeRRj8" rel="nofollow noopener">Hepa Filter</a> <a target="_blank" href="https://www.fabreeko.com/products/nevermore-carbon?_pos=1&_sid=6eb7dae4a&_ss=r&variant=43205733449983" rel="nofollow noopener">Activated Carbon Pellets</a> and <a target="_blank" href="https://west3d.com/products/premium-activated-carbon-pellets-for-voc-odor-removal-and-nevermore" rel="nofollow noopener">alternative vendor</a> (MUST BE ACID-FREE) <a target="_blank" href="https://a.co/d/h17KXCY" rel="nofollow noopener">Brass inserts</a> (M3xOD5mmxL4mm)&nbsp;<h4>INSTRUCTIONS:</h4><ol><li>Assemble Wireless Receiver <img src="https://media.printables.com/media/prints/441292/rich_content/44287131-1e64-4e54-b3cd-8d33ef5fbe02/gdbb4944.jpg#%7B%22uuid%22%3A%2270b5339a-35a8-4735-a049-5c05ef47b672%22%2C%22w%22%3A3024%2C%22h%22%3A3024%7D"> 1) Use the wire crimper, or a soldering iron, to connect the receiver 1) Following V1 instructions as reference, install the receiver coil into the V2 receiver box </li><li>Assemble wireless transmitter <img src="https://media.printables.com/media/prints/441292/rich_content/57211e24-e333-4922-9622-10ea948d4ca3/img_5637.jpg#%7B%22uuid%22%3A%226539787a-e088-4d17-b36d-fcd81bfc9127%22%2C%22w%22%3A4032%2C%22h%22%3A3024%7D"> 1) Install the wireless transmitter into the transmitter box by carefully laying the coil (coil side down) into the box. Note: This is definitely the most sensitive step in the installation. The ferrite disc is extremely brittle and can easily crack from point forces. If the disc breaks, the transmitter will likely drop enough in efficiency that it will no longer transfer enough power to run the fans. Because of part-to-part variation, you may need to fiddle a bit to get the coil to sit properly in the housing. It is critical that the coil lay flat in the housing. 2) Slot the transmitter PCB into its port and push it down onto the retaining clip. Note: Because of part-to-part variation, you may need to fiddle a bit to get the PCB to sit properly in the housing. Pull back on the retaining clip, but be careful not to snap it. <img src="https://media.printables.com/media/prints/441292/rich_content/6614f49e-a17e-4999-8a7e-d7f67b144e95/img_5638.jpg#%7B%22uuid%22%3A%22ac4e3493-d661-44a4-8a12-15d412477834%22%2C%22w%22%3A4032%2C%22h%22%3A3024%7D"> </li><li>Trim power converter <img src="https://media.printables.com/media/prints/441292/rich_content/7907b9e1-f672-46ce-9fa7-1e29dc94c939/img_5654.jpg#%7B%22uuid%22%3A%227fb0573f-9d5d-48de-964b-1879cca03f32%22%2C%22w%22%3A3024%2C%22h%22%3A2547%7D"> 1) The boost converter linked has a variable output and needs to be trimmed to 12V (for 12 fans) or 24V (for 24V fans) before assembling. Do this by powering the assembled wireless transmitter and centering the assembled wireless receiver on top of it. 2) Use the wireless test jig to align the coils 3) If the coils are properly aligned, the display should illuminate. You may need to press the IN button to turn on the display. 4) If the display reads 5V, press the OUT button to change the output to the converted voltage. 5) Turn the potentiometer near the power led until the LED displays 12V or 24V (depending on fans chosen). If the display does not change value, press the out button and try again. </li><li>Install boost converter into receiver box <img src="https://media.printables.com/media/prints/441292/rich_content/a7114068-db19-46a3-bc7e-400e4e4c644f/xpzc2004.jpg#%7B%22uuid%22%3A%225fadf4b8-b6ec-44cf-87d3-21fbe2f94909%22%2C%22w%22%3A3024%2C%22h%22%3A3024%7D"> 1) After cutting the ends off the fan wires (be careful not to cut the wire too short, extra slack is better than not enough), mount the boost converter onto the standoffs in the receiver box </li><li>Align fan duct onto receiver box <img src="https://media.printables.com/media/prints/441292/rich_content/99352da6-7812-4e05-8ed6-8537cc37a212/img_5748.jpg#%7B%22uuid%22%3A%2287006ad5-3164-4943-aff6-b7ea9ce608f6%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"> 1) Place the fun duct on top of the receiver box and align the boost heat sink and display into the fan duct holes. </li><li>Assemble and install Bento Box <img src="https://media.printables.com/media/prints/441292/rich_content/75336c83-7686-499c-86bf-26e25a3eb7a3/img_5747.jpg#%7B%22uuid%22%3A%22ca935428-2d66-492d-937d-f6e6d3497159%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"> 1) Assembly the individual modules, magnets, add carbon pellets, and hepa filter into their respective boxes. <img src="https://media.printables.com/media/prints/441292/rich_content/181cd693-5678-409e-ba07-7c06fb0eea22/img_5659.jpg#%7B%22uuid%22%3A%226dcecbca-dd66-4a9e-9f82-5699e99028f0%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"> 2) Gain access to the underside of the X1C 3) Install the transmitter box in the space provided. Make sure you push it flush against the underside plastic. 4) Route the micro-USB out the back of the system. <img src="https://media.printables.com/media/prints/441292/rich_content/d9fadf74-9d8e-41d5-92ff-487e78ca4d87/img_5663.jpg#%7B%22uuid%22%3A%22d4719e3c-b856-4fe6-9601-e900a095fe74%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"> </li><li>Install Bento Box <img src="https://media.printables.com/media/prints/441292/rich_content/b6e5c127-6bbb-4cff-a1eb-4674be7654cf/img_7010.jpg#%7B%22uuid%22%3A%22df365d4d-5793-45a2-a72a-3601d8ad9fd7%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"><img src="https://media.printables.com/media/prints/441292/rich_content/68e132bf-4fa7-48ff-8470-a021a15b511e/img_7014.jpg#%7B%22uuid%22%3A%22c1a988e9-1663-44a9-afba-62e665309383%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"> If all went well, the Bento Box should power up once it is placed in the system</li></ol>

Wireless powered Bento Box Air Purifier for X1C / P1P

3D Printer Accessories

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

Organization

ExtRuben

Hello Makers,check out this mechanical bottle opener with internal counter.All parts can be printed without supports and almost every material can be used.I tryed to use only parts everyone has at home so you just need:&nbsp;1-2x rubber band1x 5 cent coin (euro)&nbsp;Quantity of printed parts:1x BC_Bottleopener1x BC_Bottleopener_OnewaySpring1x BC_BottleopenerCover1x BC_Case1x BC_CaseOnewaySpring4x BC_DigitGear1x BC_IdlerGear3x BC_Minigear1x BC_OnewayGear1x BC_Wallmount1x_BC_MinigearAxis2x BC_CounterAxis1x BC_BottleopenerPin1x BC_BottleopenerAxis&nbsp;IMPROVEMENTS:<ul><li>The bottleopener itself is improved so bottles are easier to open now</li><li>The Wallmount can be screwed in place or 20x3mm magnets can be used</li></ul>&nbsp;For assembly you can follow the steps in my assemly video:<figure class="media"><oembed url="https://www.youtube.com/watch?v=jW4_7FFml3w"></oembed></figure>&nbsp;I hope you enjoy this project!I am looking forward to see all the makes and remixes!&nbsp;

Beer Counter  - Bottle opener 

Misc

Lozagon1234

Unlock a new level of versatility with The Ultimate Carabiner V1.5, an enhanced 3D model designed for various attachment needs. Ideal for outdoor enthusiasts, DIY projects, and everyday use, this sturdy and improved carabiner features a reinforced design and an upgraded locking mechanism for secure and reliable performance.Enhanced Reinforced Design: Built to withstand the demands of diverse applications, The Ultimate Carabiner V1.5 boasts an enhanced and reinforced structure. The improved design ensures durability and reliability in various scenarios, making it the ideal companion for outdoor adventures and practical everyday use.Upgraded Locking Mechanism: Experience added security with the upgraded locking mechanism of The Ultimate Carabiner V1.5. The refined closure system enhances ease of use while ensuring a strong and dependable hold. The improved mechanism provides peace of mind for users engaging in a range of activities.Versatile and Practical: The Ultimate Carabiner V1.5 is designed with versatility in mind, offering a practical solution for a multitude of attachment needs. Whether you're securing gear, organizing items, or enhancing your DIY projects, this carabiner is the ultimate tool for simplifying your daily tasks.Recommended Printing Materials: For optimal strength and performance, it is recommended to print The Ultimate Carabiner V1.5 using PETG, PC, or other high-strength materials such as Nylon with carbon fiber reinforcement. These materials provide enhanced durability and resilience, ensuring that your carabiner stands up to the rigors of various applications.Easy 3D Printing: Optimized for straightforward printing on standard 3D printers, The Ultimate Carabiner V1.5 ensures a seamless manufacturing process. The user-friendly design facilitates easy assembly, allowing you to create a reliable and robust carabiner with minimal effort.Warning: Not for Climbing Use: Please note that The Ultimate Carabiner V1.5 is designed for general-purpose use and is not intended for climbing activities. It is essential to adhere to safety guidelines and avoid using this carabiner for activities such as rock climbing or any scenarios where personal safety is at risk.Customization Possibilities: Express your style by experimenting with different filament colors to match your gear or personal preference. The modular design of The Ultimate Carabiner V1.5 allows for easy customization, making it a versatile and personalized accessory.Explore More: Download The Ultimate Carabiner V1.5 3D model now and elevate your attachment game with enhanced strength and reliability. Explore our website for more functional and customizable 3D models that cater to your practical needs.

The Ultimate Carabiner V1.5

Functional Prints

MakerWorld

This is a well-designed 4-color Lichtenstein Castle model with rich details on exteriors. It can be 3D printed in multiple colors with Bambu Lab AMS.&nbsp;Recommended filaments:Bambu PLA-CF Burgundy Red(14200)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231516275" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231516275</a>Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231581811</a>Bambu PLA Basic Gray(10103)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-basic-filament?variant=40909352960115" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-basic-filament?variant=40909352960115</a>Bambu PLA Matte Dark Blue(11602)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-matte-filament?variant=40789984968819" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-matte-filament?variant=40789984968819</a>Hotend: 0.4mm Hardened SteelPrint time: 24.3h

Lichtenstein Castle

Jaxel

Another of many PTFE guides for the X1C and the AMS. This lines up the input feed.&nbsp;You should have longer M3 screws in the accessories kit that came with your printer.If you don't have any, you can buy any generic M3 hex socket screw kit off <a target="_blank" href="https://www.amazon.com/gp/product/B0B31SC98Z" rel="nofollow noopener">Amazon</a>.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

3D Printer Accessories

Organization

Misc

Functional Prints

Art

Printed