corazzinis

Jeff C.

Colorized .3MF file from Phillipe's Bruins Centennial logo model on Printables. This will print using all 4 colors on the AMS.&nbsp;I used Matte PLA since it tends to hide the layer lines more, but you do you. You'll need the following:&nbsp;AMS Position 1 - WhiteAMS Position 2 - YellowAMS Position 3 - BlackAMS Position 4 - Brown

Boston Bruins Centennial Logo - Colorized

Hockey

CF3D Designs

Las Vegas Raiders Coaster&nbsp;4 Coaster on build plate&nbsp;Printed with PLA FilamentBambu Basic Jade WhiteBambu Basic BlackBambu Matte Ash Grey

Las Vegas Raiders Coaster

Coasters

Z3Dartandtech

Follow the link for my 4.0 version :) <a target="_blank" href="https://makerworld.com/en/models/91760#profileId-98158" rel="nofollow noopener">https://makerworld.com/en/models/91760#profileId-98158</a>&nbsp;The model is 3.2mm height and there is a color change at 2.2mm. if your printer support command M600.

The Beatles coasters

Musical

Key Holder

Brandonw2886

Designed this egg plant as a gag trophy at work. I originally prointed on an Ender and mannually changed filament for the different colors. someone could colorize the model and and print with AMS. Right now its just setup for one simple color.

Veiny Egg Plant Trophy

Adult

dudis00

Made this wallart based on a picture found online…. small drops of glue recuired to mount prints togetherIf you have an AMS, use 3mf file for multicolor print without gluing :-)

Harley Wall decor

Motorcycle

baris.ayarkan

Trump coaster I used 3 color but you can use 2 color as well or whatever you wish!

Trump 2024 Coaster

Political

3Dennis

Appreciate the design? Consider supporting my work by <a target="_blank" href="https://makerworld.com/en/u/3694296089" rel="nofollow noopener">following my account</a> :) [Description by original designer]&nbsp;Time for Christmas, time for a less boring package for the cash my nephews will get. Last year it took them all of 5 seconds to get at their cash, hopefully this one will take them a little bit longer. There's only one correct path and I tried to make it so that it's easy to slide past the correct exits, time will tell if it's effective.&nbsp;As always, please post pictures if you decide to make one. I've spent more hours than I care to count on this one so it's the least you can do dammit ;)&nbsp;Update: Well, Christmas is over and I'm happy to report that it was the first gift received but the last one opened for the day. One was still closed when I left. I'll call that a success :)

Labyrinth Gift Box

Brain Tease

Nakozen

Space: the final frontier. These are the voyages of the Starship Enterprise. Its five-year mission: to explore strange new worlds. To seek out new life and new civilizations. To boldly go where no man has gone before!First of the upcoming series of new sci-fi kits is of course the NCC-1701 Enterprise from Star Trek the Original Series.<a target="_blank" href="https://www.thingiverse.com/thing:4601489" rel="nofollow noopener">Find TNG's NCC-1701-D Enterprise kit here!</a>Two versions of the kit are included, one with a hanging loop and another without, alongside the individual part files. UPDATE 12/12/22: Version 2 has been added along with a tighter variant (labelled ‘Ti’)!------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. The model parts are 1.8mm high, which is not divisible by 0.16 for example!Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive! Makes greatly appreciated, always glad to see them! Happy Printing!------------------------------------------------------------Interested in selling? All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a>

NCC-1701 Enterprise Kit Card

Star Trek 

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>

Halloween Tea Light Display

Halloween

ItsNico

This is a model of an owl perched on a rock. This is a completely original design that I made in blender. The large model is 15 cm tall, which I found is a good size for a desk decoration, and only took about 2 hours to print. The smaller model I printed in gold, and is a fun small gift to giveaway.

Owl on Rock Model

Birds

ippe__

My kid is sleeping in the next room from my gaming area and when ever I'm too lazy to put headphones on, he comes up and shh me. I printed this to remind me :)Einstein and hand are attach with double sided tape.Also in reddit I saw a photo of an art piece something similar like this, which gave me an idea to this.Edit 16.8.2021: Today I tried photogrammetry instead of scuplting, but after several failed attempts came back to the original hand made last night, then I just made it 150% bigger and now it looks...much better. I left the original, smaller hand there too, because why not.Einstein head is a Remix from <a href="https://www.thingiverse.com/thing:966908" rel="nofollow">@LSMiniatures design</a><h3>Print Settings</h3>Printer Brand:Creality&nbsp;Printer: Ender 3Rafts:&nbsp;No&nbsp;Supports: NoResolution:&nbsp;0.2&nbsp;Infill: 10% Filament: Fillamentum pla white Notes: Face takes little over 7 hours to print with 60mm/s speed and the hand little under 2 hours. Together they used 75 grams of filament (25 meters).&nbsp;&nbsp;&nbsp;&nbsp;Category: Sculptures

Shh!

Faces

fay3dlab

&nbsp;A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini bicycle card came to fruition..The whole kit card was modelled using Tinkercad and 3d printed using Bambulab P1p..Assembly video can be found here: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=LcFwJKVBVuo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LcFwJKVBVuo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a href="https://www.buymeacoffee.com/fay3dlab" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/arial-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 109px !important;" ></a>

Mini bike kit card

Bicycle

Articulated monarch butterfly&nbsp;Approximately 140x103x8mm.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Articulated Monarch Butterfly

Bugs

Ben Haycraft

This is a replacement for a dial knob on an home entertainment system.Includes the print file with supports.

Dial Knob

Knobs

hlrcreations

Update Oct 1st 2023 3MF fileSlowed down to 35mm for first layer.4 top and 4 bottom layers.&nbsp;Still learning how to make these proper. And thanks for looking. Very Basic profile for this one. 89mm in diameter, and 2mm thick.

Skull Tree of life Coaster

Skulls

cyanidesugar

Darth Vader Coaster The included 3MF file splits the background of the coaster and Vader's head into separate plates to be printed. You don't have to print it this way, however since I wanted very different colours for the coaster backing, this was the simplest way. &nbsp;I have included both STLs along with the 3MF for the coaster background and the Vader head in case you want to print them both together with your own custom colours. &nbsp;For Vader's head, the swap instructions are: &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: - PLA Siddament Black Transmission Distance: 0.2 - PLA+ eSun Grey Transmission Distance: 1.4 - PLA META Sunlu White Transmission Distance: 9.6&nbsp;Swap Instructions: - Start with Black - At layer #8 (0.72mm) swap to Grey - At layer #16 (1.36mm) swap to White for the rest. &nbsp;

Darth Vader Coaster 

Movies

m-holler

This design is by mohammad reza taherizad and I have printed this with all my 3D printers so far because I just love this model. I created a .3mf file because the original .stl files had some errors. Thanks again to: <a target="_blank" href="https://www.thingiverse.com/taherizad/designs" rel="nofollow noopener">https://www.thingiverse.com/taherizad/designs</a>

heart hand love hand

Love

mcgybeer

Articulated Lizard, the original!No supports or assembly required. Just slice and print!!

Articulated Lizard v2

Animals

FRIARTUCK11

The HistoryRobert Indiana debuted the design for his famous sculpture as a painting in 1964. After constructing the aluminum piece, Indiana lent it to the City of Philadelphia as part of the U.S. Bicentennial in 1976.&nbsp;<a target="_blank" href="http://www.associationforpublicart.org/artwork/love/" rel="nofollow noopener">LOVE</a> remained in John F. Kennedy Plaza for two years.&nbsp;The sculpture moved briefly to New York until a local businessman bought it and donated it to Philadelphia. In February 2018 — after a year away from public view — the sculpture returned with a new color scheme of red, blue and purple instead of blue.An iconic image synonymous with Philadelphia, the piece’s likeness has been recreated on items ranging from postage stamps to jewelry.&nbsp;Check out the companion AMOR sculpture here:<a target="_blank" href="https://makerworld.com/en/models/14233?profileId=14214" rel="nofollow noopener">https://makerworld.com/en/models/14233?profileId=14214</a>&nbsp;This PrintI printed this with 0.2mm layer height in gray instead of blue. I started with red for the first 3 layers on a textured build plate, then I added a color change to gray for the remaining layers. Turned out great!