Conrad Jun

duck.knapp

I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...&nbsp;&nbsp;so I developed my own press. You can print everything except 6x 608 zz ball bearings which you have to press in.&nbsp;&nbsp;For assembly you need: - First the 6 bearings are pressed in - join your arms - arms to the headpiece - arms with headpiece to the base&nbsp;&nbsp;It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose. The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.&nbsp;It&#39;s not an easy print but I think it&#39;s cool XD&nbsp;Material: PETG, ABS, Nylon or so&nbsp;btw: In the pictures you can see the old arms, now they are different lengthsand as always if you think of something that I can change/improve, please let me know

Heat Set Insert Press (99% 3D-Printed)

工具

marekzeman91

<h3>Study board with shapes for kids.</h3>For easier studying try to print it with more colors.<h3> </h3><h3>Printing tips</h3><ul><li>Infill: use as little as possible for the board (I used 10%) to keep the board light.</li><li>Bending: use glue stick or spray to keep your print hold on the plate.</li><li>Size: should print fine even at 50% due to added spacing.</li><li>Shapes: if you want to have both sides smooth you can try ironing.</li></ul>

Board: Shapes (filled)

玩具

landlord_rentz

I didn&#39;t like other options I found, so I just threw this together quick in fusion. Works great for my needs. I ran it with 6 walls on a 0.4 nozzle and 20% infill with 0.2 height.

Grocery Bag Carrier Handle

家用

V3 Precision

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design.The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit. Might need to super glue the magnets in place.The cutaway o n the size serves two functions. It gives you a recessed handle to grip the poop chute when taking it off. The angled top of the cutaway helps direct the waste filament across the chute. Helps to keep the filament from bunching up directly beneath.&nbsp;Filament - I used PLA+ or PLA Carbon FiberSupport - Yes; Hybrid, AutoLayer - 0.2mmInfill - 15%3mf file using Bambu Lab Studio (slicer)&nbsp;UPDATE:The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.The new design is poop_shoot_L_magnetic_V2&nbsp;You can find a finished Poop Chute with the magnets on our website www.v3precision.com.

工具

玩具

家用

拓竹配件