colin.beaumont90

kcharlie.hanson

This will allow you to mount your harbor freight glove box to the multiboard. I have tested the horizontal pieces and they work great. I have not tested the vertical but it's just a slight modification to the horizontal.You will need x2 of the horizontal mounts and x2 multiboard snaps. If you wish to mount your gloves vertically you will need x1 of the horizontal mount, x1 of the vertical, and x2 of the multiboard snaps.If this doesn't make any sense to you, I would encourage you to visit <a target="_blank" href="https://www.multiboard.io/" rel="nofollow noopener">https://www.multiboard.io/</a>

Harbor Freight Glove Box for Multiboard

Multiboard

Spike_Mix

An underground tunnel placed in the corner of your tank where your fish can hide while you can watch them.&nbsp;Burry the tunnel under your aquarium soil or gravel and let your fish explore it.All the edges are rounded to protect you fishes&#39; fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the entrance). The entries are 30mm x 40mm. The plastic thickness is 3mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000180646/design/2024-02-11_tz054x7tj6r2.png"></figure>&nbsp;Materials: Pick materials that are safe for both your fish and plants. It&#39;s usually recommended to use ABS or specific food-safe PLA, and it&#39;s often advised to coat the print in a safe epoxy to seal it.&nbsp;To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Underground corner tunnel for aquarium/ fish tank

Fish tank

CoNcLuZiOn

<h4>Desk wire / cable hole with cover</h4>Diameter 50mm.<h4>Check also my other creations:</h4><a target="_blank" href="https://makerworld.com/sk/models/85740#profileId-91657" rel="nofollow noopener">Alphabet puzzle letter tiles</a><a target="_blank" href="https://makerworld.com/sk/models/84597#profileId-90439" rel="nofollow noopener">Alphabet</a><a target="_blank" href="https://makerworld.com/sk/models/83939#profileId-89725" rel="nofollow noopener">Numbers 0-9</a><a target="_blank" href="https://makerworld.com/sk/models/83894#profileId-89681" rel="nofollow noopener">Party mustache</a><a target="_blank" href="https://makerworld.com/sk/models/83122#profileId-88667" rel="nofollow noopener">Christmas tree ornaments</a><a target="_blank" href="https://makerworld.com/sk/models/85616#profileId-91515" rel="nofollow noopener">Braille Alphabet letters tiles</a><a target="_blank" href="https://makerworld.com/sk/models/86533#profileId-92758" rel="nofollow noopener">Earrings</a><a target="_blank" href="https://makerworld.com/sk/models/87591#profileId-93720" rel="nofollow noopener">Earrings zodiac signs</a><a target="_blank" href="https://makerworld.com/sk/models/89559#profileId-95855" rel="nofollow noopener">Spaghetti measuring tool</a><a target="_blank" href="https://makerworld.com/sk/models/89598#profileId-95902" rel="nofollow noopener">Herb stripper tool</a><a target="_blank" href="https://makerworld.com/sk/models/89723#profileId-96046" rel="nofollow noopener">Simple bag clip</a><a target="_blank" href="https://makerworld.com/sk/models/90782#profileId-97140" rel="nofollow noopener">Cheese tray</a><a target="_blank" href="https://makerworld.com/sk/models/90784#profileId-97143" rel="nofollow noopener">Tongs from forks</a><a target="_blank" href="https://makerworld.com/sk/models/91261#profileId-97589" rel="nofollow noopener">Post-it notes + pens tray</a><a target="_blank" href="https://makerworld.com/sk/models/91688#profileId-98033" rel="nofollow noopener">Simple bag clip v2</a><a target="_blank" href="https://makerworld.com/sk/models/91715#profileId-98069" rel="nofollow noopener">Phone stand</a><a target="_blank" href="https://makerworld.com/sk/models/91813#profileId-98218" rel="nofollow noopener">Simple funnel</a><a target="_blank" href="https://makerworld.com/sk/models/91931#profileId-98325" rel="nofollow noopener">Spoon / kitchen tools holder</a><a target="_blank" href="https://makerworld.com/sk/models/92864#profileId-99322" rel="nofollow noopener">Keycap remover</a><a target="_blank" href="https://makerworld.com/sk/models/94213#profileId-100844" rel="nofollow noopener">Kitchen cabinet handle</a><a target="_blank" href="https://makerworld.com/sk/models/96572#profileId-102975" rel="nofollow noopener">Earrings 2024</a><a target="_blank" href="https://makerworld.com/sk/models/96583#profileId-102983" rel="nofollow noopener">Egg cup</a><a target="_blank" href="https://makerworld.com/sk/models/96625#profileId-103041" rel="nofollow noopener">Cable clip</a><a target="_blank" href="https://makerworld.com/sk/models/97794#profileId-104336" rel="nofollow noopener">Notebook stand</a><a target="_blank" href="https://makerworld.com/sk/models/97829#profileId-104369" rel="nofollow noopener">Fractions - easy learning</a><a target="_blank" href="https://makerworld.com/sk/models/97893#profileId-104428" rel="nofollow noopener">Banana slicer</a><a target="_blank" href="https://makerworld.com/sk/models/106086#profileId-113266" rel="nofollow noopener">Horse bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/106089#profileId-113269" rel="nofollow noopener">Cat bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/106164#profileId-113343" rel="nofollow noopener">Owl bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/107349#profileId-114664" rel="nofollow noopener">Lion bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/108364#profileId-115761" rel="nofollow noopener">Wall art / decor OWL</a><a target="_blank" href="https://makerworld.com/sk/models/111997#profileId-119955" rel="nofollow noopener">Cute dog bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/116399#profileId-125088" rel="nofollow noopener">Cute fox bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/116469#profileId-125173" rel="nofollow noopener">Love bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/116509#profileId-125219" rel="nofollow noopener">Cute bird bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/129744#profileId-140652" rel="nofollow noopener">Cat 2d decor</a><a target="_blank" href="https://makerworld.com/sk/models/129753#profileId-140661" rel="nofollow noopener">Clef 2d decor</a><a target="_blank" href="https://makerworld.com/sk/models/129764#profileId-140673" rel="nofollow noopener">Bear 2d decor</a><a target="_blank" href="https://makerworld.com/sk/models/129780#profileId-140686" rel="nofollow noopener">Dancer decor</a><a target="_blank" href="https://makerworld.com/sk/models/131411#profileId-142562" rel="nofollow noopener">Heart hands decor</a><a target="_blank" href="https://makerworld.com/sk/models/131463#profileId-142616" rel="nofollow noopener">Dragon bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/131512#profileId-142674" rel="nofollow noopener">Heart bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/131681#profileId-142820" rel="nofollow noopener">Octopus bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/131685#profileId-142823" rel="nofollow noopener">Middle finger bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/131810#profileId-142943" rel="nofollow noopener">Bird bookmark AMS</a><a target="_blank" href="https://makerworld.com/sk/models/132966#profileId-144171" rel="nofollow noopener">Dragon medallion</a><a target="_blank" href="https://makerworld.com/sk/models/133708#profileId-145048" rel="nofollow noopener">Cat multicolor bookmark</a><a target="_blank" href="https://makerworld.com/sk/models/133740#profileId-145107" rel="nofollow noopener">Bag clip v3</a><a target="_blank" href="https://makerworld.com/en/models/133759#profileId-145131" rel="nofollow noopener">Chilli stand</a><a target="_blank" href="https://makerworld.com/en/models/135035#profileId-146499" rel="nofollow noopener">Kitten bookmark</a><a target="_blank" href="https://makerworld.com/en/models/135137#profileId-146641" rel="nofollow noopener">Kitchen cabinet door knob</a><a target="_blank" href="https://makerworld.com/en/models/135174#profileId-146690" rel="nofollow noopener">Chilli plant sticks</a><a target="_blank" href="https://makerworld.com/en/models/135178#profileId-146695" rel="nofollow noopener">Screw and tool organizer</a><a target="_blank" href="https://makerworld.com/en/models/138424#profileId-150724" rel="nofollow noopener">Heart keychain</a><a target="_blank" href="https://makerworld.com/en/models/138468#profileId-150805" rel="nofollow noopener">Heart keychain2</a><a target="_blank" href="https://makerworld.com/en/models/138574#profileId-150945" rel="nofollow noopener">Heart shaped gift box</a><a target="_blank" href="https://makerworld.com/en/models/138849#profileId-151230" rel="nofollow noopener">Bouquet wall decor</a><a target="_blank" href="https://makerworld.com/en/models/139099#profileId-151539" rel="nofollow noopener">8-bit heart</a><a target="_blank" href="https://makerworld.com/en/models/140671#profileId-153251" rel="nofollow noopener">CEO nameplate</a><a target="_blank" href="https://makerworld.com/en/models/140846#profileId-153450" rel="nofollow noopener">Three-in-one office mate</a><a target="_blank" href="https://makerworld.com/en/models/140993#profileId-153606" rel="nofollow noopener">Wolf bookmark</a><a target="_blank" href="https://makerworld.com/en/models/141309#profileId-154002" rel="nofollow noopener">Animals bookmark</a><a target="_blank" href="https://makerworld.com/en/models/141443#profileId-154124" rel="nofollow noopener">Out of office desk / monitor sign</a><a target="_blank" href="https://makerworld.com/en/models/142251#profileId-154881" rel="nofollow noopener">Simple board game figures</a><a target="_blank" href="https://makerworld.com/en/models/144333#profileId-156914" rel="nofollow noopener">Aqara wall switch H1 frame</a><a target="_blank" href="https://makerworld.com/en/models/144465#profileId-157082" rel="nofollow noopener">Fractions - math</a><a target="_blank" href="https://makerworld.com/en/models/144505#profileId-157140" rel="nofollow noopener">Bookmark - Owl multicolor</a><a target="_blank" href="https://makerworld.com/en/models/144838#profileId-157557" rel="nofollow noopener">Floppy disk / diskette keychain</a><h4>Thank you</h4>

Desk wire / cable hole with cover

Desk build

Adam L

Update(8/6/23): Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm. This has steeper overhangs, recommend you print at a lower layer height with wider outer walls, which should help the print work. Added a picture of the model to the photo gallery.Update(6/27/23): Minor revision to the design, added a couple missing fillets to the top of the snout. No need to reprint, but if you are printing again, might want to grab this version.Update(5/3/23): I now recommend trying this one first over the parent mod, as I think it may be more generally superior with more upsides than downsides. It seems like it's been functioning well for a bit.My <a href="https://www.printables.com/model/338542-x1-p1p-ptfe-tube-guide-to-fix-loading-issues-best-" rel="nofollow">original PTFE Tube guide fix for the Bambu Labs X1/X1C/P1P series here</a> has been more successful than I could have imagined, and I'm glad it's helped a lot of people!In this remix, I'm presenting a shortened alternative that may be desirable for some people for a variety of reasons. Provided in 3MF and STEP format in a single design that is compatible with both X1 and P1P. Shown printed at 0.16 mm height with 3 walls in cloudy white PETG. There are some pros and cons relative to the original design, which should help you decide which is for you:Pros<ul><li>Quicker print/less filament (~2.8 g vs 4.5g)</li><li>Harder to destroy, more reinforced</li><li>May work better in certain scenarios where the filament is very stiff. I found the original model's curve restrictions kept forcing a very-stiff filament like eSUN’s ePAHT-CF to break, and I could not use it with the original design. With this design, I can print even this extremely stiff material! <a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">You can find my tuned profile for that here</a>.</li><li>Cuter looking, protrudes less.</li><li>Probably slightly less finicky to print… less reliant on long overhangs. I would still use a brim, however.</li></ul>Cons<ul><li>Doesn't prevent the PTFE from hitting the glass as much as the other model.</li><li>Requires decent short-bridging performance in your print (I had no problems in PETG, as shown).</li></ul>&nbsp;Printing instructions here are the same as the parent file from which this is remixed . Please see that link for details .

ShortStack: The Tiny Little Bambu AMS loading fix that might save your sanity!

Printer Parts

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Stuff for kids

Wexx3D

0.2mm layer height 10-15% infill 3 top and bottom layers0.4 mm nozzleLED's from amazon.

Multiboard

Fish tank

Desk build

Printer Parts

Stuff for kids

Cool Stuff