colbymh5

Protoprints

Looks impossible? Think again!&nbsp;Instantly elevate your bland office desk and get rid of your boring laptop risers and stands!Watch your envious colleagues&#39; jaws drop as they struggle to process a laptop floating in mid air!&nbsp;Design has been tested with a 13&#34; HP Elitebook and a 16&#34; Macbook Pro. Most laptops should fit provided that the bottom half is not too thick. Works great with iPads and other tablets too, especially for looking at recipes in the kitchen!&nbsp;This is an improved version of the <a target="_blank" href="https://makerworld.com/en/models/201206#profileId-221572" rel="nofollow noopener">original design</a> with the following goals:<ul><li>Better stability - base of the model has been reworked to be much more stable with no load / loads of different sizes (phones, tablets, laptops, etc)</li><li>Better grip - design now includes a printable TPU foot that fits in a cutout on the base (version with no foot is also available for folks that do not have TPU / do not wish to use it). No more sliding around the desk!</li><li>Design rework - many of the sharp angles have been replaced with sweeping curves. While design is subjective, i think this makes for a much more elegant look overall</li><li>Printable in one piece with no supports</li><li>Fits on A1 Mini! - i dont have one to test on, but the model fits comfortably in the build area</li></ul>Printing&nbsp;Update 7 May 2024 - added faster print profiles as there seems to be some demand for them. would still recommend going for the original high quality profiles for a more seamless look, especially with matte / wood filaments.&nbsp;The pictured model was printed with wood PLA, but any material should work. Use a heat resistant material if using in a hot environment.<ul><li>4 walls</li><li>30% gyroid infill</li><li>No supports required</li></ul>I have found that the above is sufficent to produce a nice strong print. Increase the number of walls / infill at your discretion if you wish to add even more strength.&nbsp;Do not change the print orientation! Model must be printed side down to maximize strength at stress points.&nbsp;Assembly&nbsp;Simply attach the rubber foot to the base of the model with superglue.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451998/design/2024-05-03_35485ecf29b068.jpeg">&nbsp;Happy printing! Share your makes!

The Impossible Laptop Stand v2 - Fits A1 Mini!

LAPTOP STAND

soarpix

<h2>Summary</h2>Fully printable model of a Custom open Jeep &#34;Gladiator style&#34;This model has two optional chassis. High chassis and low chassis.If you use the low chassis you must also use the smaller wheels with the file name &#34;LOW&#34;Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLAIf you have any questions, let me know in the comments or on my <a target="_blank" href="https://www.youtube.com/user/Mr4ndersson?sub_confirmation=1/" rel="nofollow noopener">YouTube channel</a>.&nbsp;You can also follow me on <a target="_blank" href="https://www.instagram.com/soarpix3d/" rel="nofollow noopener">Instagram</a> to see the designs i&#39;m working on =)&nbsp;HAPPY PRINTING!<h2>Click here to watch the video =) <a target="_blank" href="https://youtu.be/sQ7cB6PDIEE" rel="nofollow noopener">https://youtu.be/sQ7cB6PDIEE</a></h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000436379/design/2024-04-18_xw5rceyxf47p.jpg" alt="image"><h2>Click here to watch the video =) <a target="_blank" href="https://youtu.be/sQ7cB6PDIEE" rel="nofollow noopener">https://youtu.be/sQ7cB6PDIEE</a></h2>

Open JEEP Gladiator style - fully printable

JEEP

This model is an adaptation of about 6 different models all mashed together and rebuilt to work better. Fairly simple design and pretty easy setup with steady hands and a little trial and error. This uses a wireless charging induction system instead of standard wired LEDs. Theres a couple dif ways you can do this. You can order a 5v wireless charge system and supply your own leds but you need to make sure its a long distance system that carries enough amps. Or you can order the one linked below and its fairly plug and play. &nbsp;This is the charging system I used already has attached leds: <a target="_blank" href="https://www.amazon.com/dp/B09LTZZ3KV?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B09LTZZ3KV?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;Youll need a 12v power supply some wire and a female to male standard 12v connector as well as some extra wire to go out the back of the base. As well as a solid adhesive hot glue works but the set time is a pain in the butt and will make this job much more frustrating.&nbsp;Here are the examples of the other parts needed:&nbsp;Charger- <a target="_blank" href="https://www.amazon.com/dp/B00FEOB4EI?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B00FEOB4EI?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;DC Female Connector - Pre Wired - <a target="_blank" href="https://www.amazon.com/43x2pcs-Connectors-Security-Lighting-MILAPEAK/dp/B072BXB2Y8/ref=sr_1_1?crid=QN9YPXWT221V&keywords=dc+connectors&qid=1707971991&sprefix=dc+connectors+%2Caps%2C99&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1" rel="nofollow noopener">https://www.amazon.com/43x2pcs-Connectors-Security-Lighting-MILAPEAK/dp/B072BXB2Y8/ref=sr_1_1?crid=QN9YPXWT221V&keywords=dc+connectors&qid=1707971991&sprefix=dc+connectors+%2Caps%2C99&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1</a>Easy Clamps - <a target="_blank" href="https://www.amazon.com/Power-Connector-Female-Adapter-Camera/dp/B07C61434H/ref=sr_1_3?crid=QN9YPXWT221V&keywords=dc+connectors&qid=1707972056&sprefix=dc+connectors+%2Caps%2C99&sr=8-3" rel="nofollow noopener">https://www.amazon.com/Power-Connector-Female-Adapter-Camera/dp/B07C61434H/ref=sr_1_3?crid=QN9YPXWT221V&keywords=dc+connectors&qid=1707972056&sprefix=dc+connectors+%2Caps%2C99&sr=8-3</a>&nbsp;Adhesive - <a target="_blank" href="https://www.amazon.com/dp/B085BWFLKG?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B085BWFLKG?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;Its a pretty simple print supports should already be painted on, if you dont paint them on iv noticed that supports will pull pieces off the print and cause issues. Only use supports around the bottom hard edge and under the half tunnel inside the hammer head. I printed the base up side down with supports on. This is not 1:1 and scale if you want 1:1 scale to 100% but youll need split the base at that point. I suggest maybe scaling the base up a few % for better fitment by around 1-4%. I printed the hammer in PLA + Silver Grey, Base in Silver, Handle in PLA+ real wood. No supports are needed on the handle. &nbsp;Assembly: &nbsp;Its pretty cut and dry but some pointers. Glue your light ring inside the cap and then lights inside that ring. You are going to want to check fitment of everything and plug in lights and test ring locations as its fineky. Glue your lights to cap and then get your plugged in transmitter and put it inside base and play around with it untill you get the best lighting. This is where it gets tricky because youll need to hold that placement and get glue down all at the same time with two hands. After that its smooth sailing! &nbsp;Hanlde goes together real easy and only needs a little bit of glue to hold it together and in the hammer. I printed in wood and used a silver paint marker to paint the rings.&nbsp;Hammer head you just simply glue both halves together.&nbsp;

Cracked Mjolner With Wireless Leds and Base (Cracked Thor Hammer)

THOR

bottle holder

Dream

Introducing &#39;Patriot&#39;s Creed Illumination&#39;—a stirring light box embodying the resilience of &#39;We the People&#39; since 1776. The powerful statement, &#39;We were not ascended from weak men,&#39; serves as a bold reminder of our shared history and strength. Illuminate your space with this patriotic beacon, honoring the spirit of independence and fortitude that has defined us through the ages. Let this light box stand as a testament to the enduring legacy of &#39;We the People&#39; since the founding year of 1776.

Patriot's Creed Illumination

PATRIOTS CREED ILLUMINATION

DKprints

A spinning bathroom sink organizer! The two ends of the organizer rotate in order to privide better access to whatever you choose to store! Prints on one plate and requires a push fit assembly of the four small legs into the holes in the bottom of the organizer. Happy Printing!

Spinning Bathroom Organizer 

Bathroom

HINGES

T.giovanzana

***************************** V3 - 2024-04-15Added new print profile for A1 mini - 180x180plates.For every part in this case you have 2 pieces.You only need to download the stls, import in your 3d printer profile and print one stl a time (join the 2 parts and glue them - optional but recommended).Assemble as normal instruction below.&nbsp;***************************** V2 - 2024-04-10Added 2 versions of &#34;Base&#34;, specifically projected to accomodate slim guns. The base is large 35mm instead of the standard 50mm.&nbsp;***************************** V1 - 2024-04-08This is my new modular pistol/gun rack.It is universal for Glock, S&amp;W, Sig, Ruger, and many others.I had the inspiration from an article in an online shop, and I starded drawing it during the all night :)You can start from one module and add as many as you want.&nbsp;If you want the module for one gun you need:StartBase (design that you prefer)End&nbsp;If you want the module for two gun you need:StartBase (design that you prefer)MiddleBase (design that you prefer)End&nbsp;Just add one Middle and one Base every gun you want to add to your new modular rack.&nbsp;&nbsp;Hardware: You only need screw M4, 20mm lenght and a bit of filament!When mounting you need to start to the end, example for 2 module rack: End screwed to the Base, Middle screwed to the Base, other Base screwed to the Middle, Start screwed to the Base.&nbsp;Please feel free to write your comment!&nbsp;You may also like:<a target="_blank" href="https://makerworld.com/en/models/458424" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-05-09_b6854913d7436.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/434889" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_a6b1293e3ada7.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/429884" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_cf8a8ca7201af.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/428993" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_8a361d0d54429.webp"></a>

Modular pistol/gun rack (Glock, S&W, Sig, Ruger)

glock holder

Bad Intelligence

<h3>This project is currently in BETA (as of April 24)</h3>Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested.&nbsp;UPDATE: A new experimental Reinforced Locking Pin has been added to the print profile. You can find it on its own print plate.Check below for more info on how to make it and the materials needed.&nbsp;If you run into any issues please comment below so I can use the data to find us a solution.&nbsp;Adjustable Pistol Brace for your AR pattern, airsoft, short barrel, rifle, pistol, things.Clone/replica of SB Tactical&#39;s very popular (and expensive) SBA3.<h4>Parts Needed:</h4>1x AR mag catch spring1x M4x 30mm bolt screw2x M4x 20-30mm bolt screw3x M4 nuts70 grams tpu175 grams Impact resistant PLA (+, pro, or CF)&nbsp;Optional/recommended:1inch by ~2ft adjustable velcro strapFor reinforced locking pin:1xM4x6mm Hex head boltJB Weld<h4>Tools:</h4>M4 screwdriver/Allen keyDrill gun with-8mm or 5/16ths inch bit<h4>Cost:</h4>Filament $5Spring $0.5ea ($12 for 20 on PSA)Hardware &lt;$1 ($15 for M4 variety box on Amazon)Velcro Strap $13 on SB Tactical Website (or can buy 30 ft of adjustable strap on Amazon or $10)Total: APB3 &lt;$20 vs paying $125 for the SBA3<h4>Assembly:</h4><ol><li>Remove all support material, note that there are two nubs on the back/bottom of the main body, do not accidentally remove these while trying to remove all of the support that surrounds them. </li><li>Take two M4 nuts, and put them in the holes in the back and on the side of the main pla body. Rotate them until they sit into the holes and no longer rotate side to side, there will be room for them to move up and down, this is for if you want to upgrade to use thicker nylock nuts, so far nylock has been unnecessary.</li><li>Slide on the Tpu arm brace thing, it&#39;s easiest to gently rock back and forth till it pops over the nubs. – be careful as to not lose the nuts as you slide the tpu over them.</li><li>take your 2x m4 x20mm-30mm (do not use longer than 30mm as they will extend into the cavity and block buffer tube) and screw down the tpu brace</li><li>Drill out the hole for the locking pin using your 8mm or 5/16th inch drill bit, the goal is not to remove material but just make sure the hole is round and smooth from any bits or lingering supports.</li><li>Optional *Make the reinforced pin below*</li><li>Drop in the pin, hole end last, and push it down until you can see the pins hole through the slots in the main body. Slide the push lever onto the main body and slide a small screwdriver (any small cylinder) through the holes in the lever, main body, and the pin to the other side and through the M4 nut to make sure they are all lined up, leave it in. </li><li>Take your remaining m4 bolt and start screwing it through the hole chasing the smaller screwdriver you used to line the holes up, go slow and check for bending/deformations that would indicate you are not properly lined up.</li><li>Lastly, insert your spring into the hole behind the pin. Use something (I used a flathead screwdriver) to push down the spring and then slide the spring tab over the spring until it pops into place. </li></ol>Making the reinforced locking pinMaterials needed:Steel-reinforced JB Weld epoxy1x M4x5-6mm Hex key socket head bolt****Please reference the photo for the specific dimensions needed for the bolt<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424473/design/2024-04-17_75eac6c9a9c1.jpg">Instructions:<ol><li>Print your reinforced pin (not the same as the old pin) keep the orientation as in the print profile, and leave the supports off.</li><li>Mix your two-part epoxy well (you only need a little, maybe the size of 2 peas).</li><li>I recommend using some Q-tips as your applicators, cutting them in half, and using the stick end to apply epoxy and the cotton end to wipe up excess.</li><li>Add a drop of epoxy into the cavity in the top of the pin, use your q-tip to push it in, remove any air bubbles, and coat the walls. We don&#39;t want to FILL the cavity we just want to add a drop and coat the walls.</li><li>Thinly coat the threads of your M4x6mm pin, and slowly twist while sliding it into the top cavity, wipe up any excess that flows past the edge of the plastic.</li><li>You should have noted that there is a small hole connecting the cavity in the top, to the perpendicular hole where the lever will connect, ideally a small amount of epoxy found its way here, use your Q-tip and wipe away any excess that would block the lever pin later on.</li><li>IMPORTANT make sure the m4 bolt fully seats on the edge of the plastic, tolerances are tight, and if it is taller than it should be, you&#39;re going to have issues.</li><li>Also IMPORTANT once you&#39;ve stuck it together and cleaned up the excess, LET IT CURE (bolt head down) for the whole amount your epoxy recommends, applying any force while curing, will compromise the cement&#39;s integrity. Just let it rest, do not continue assembly until it&#39;s fully cured.</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424473/design/2024-04-17_ce11987a64c96.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424473/design/2024-04-17_748072ee20879.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424473/design/2024-04-17_89a09c20f2854.jpg">&nbsp;&nbsp;Fin.&nbsp; Trouble Shooting:<ul><li>It has come to my attention that not all AR mag catch springs are the same spec. If you find your spring exceptionally difficult to install (it should still be a little difficult) then feel free to take some pliers or wire cutters and trim the spring a couple of mm until it is still 1-3 mm above where the spring tab would normally sit flush, make sure your lever is in the fully seated/locked position. You don&#39;t want to undershoot it.</li><li>Note the push lever will be very tight at first, and it may seem like there is not enough spring force for the brace to lock into place on its own. However, after a little use, 3-5 min manually pushing the lever up and down the push lever will loosen up and reliably lock into place.</li><li>If your stock locking mechanism is still giving you trouble -- the spring doesn&#39;t always push the pin up into the locked position, even after working it in for a couple of minutes and also making sure there is no support debris-- then you most likely have over-tightened the bolt that holds the lever/pin. Loosen it a ¼ turn at a time and you should notice the spring pushes the pin into a locked position much easier. If you are worried about the bolt falling/backing out, upgrade your nut to a nylock nut. If this doesn&#39;t work then you have a bad dimensional print or a poopy spring, idk.</li></ul>&nbsp;&nbsp;

The APB3 - Adjustable Pistol Brace

pistol brace

DonBossco

A trophy for the winner of the losers

Loser Trophy

BIGGEST LOSER

Geeks3D

Discover our innovative Seat Belt Silencer!an ingenious 3D-printed accessory designed to improve your driving comfort, especially when carrying heavy items on your seats. Crafted with precision, this innovative solution minimizes the noise of seat belts, providing a quieter and more enjoyable ride. Say goodbye to distractions and hello to a smoother journey with our easy-to-install Seat Belt Silencer<ul><li>Fast to print</li><li>User-friendly</li><li>Strong</li><li>Specifically designed for FDM Printing</li><li>Smooth Operation</li></ul>&nbsp;USE AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED!If it doesn&#39;t function properly in your car, please inform me, and I&#39;ll explore redesigning it to better suit your needs!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/Geeks3D" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Remember to hit the like button and follow if you like my designs!&nbsp;You may also like: Stackable Crate For Batteries Mario 360° Makeup Brush Holder &amp; Organizer<figure class="table" style="width:857.375px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> <figure class="image"><a href="https://makerworld.com/en/models/67355#profileId-71293" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/838922/2023-11-18_be779a260a76a.jpg"></a></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> <figure class="image image_resized" style="width:84.6%;"><a href="https://makerworld.com/en/models/375299#profileId-275196" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/838922/2024-03-16_ddadd90d09674.png"></a></figure></td></tr></tbody></table></figure>

Seat Belt Silencer

SEAT BELT SILENCER

Freedom 3D Prints

New lightbox drop of the day.&nbsp;Illuminate your passion for the Second Amendment with our striking lightbox. Proudly display your support for constitutional rights and the right to bear arms with this captivating piece of art that combines patriotism and style in one.&nbsp;Add your own LEDs and you are ready to go!&nbsp;Interested in selling our prints? Become a member of our brand new Patreon! <a target="_blank" href="https://www.patreon.com/Freedom3DPrints" rel="nofollow noopener">Freedom 3D Prints | Unique 3D prints celebrating American spirit | Patreon</a>

Defend the Second - Lightbox

LIGHT BOXES

JDan Art

Defender keychainPrints horizontal with supports30% infill and thicker walls for extra strength.

Defender

DEFENDER TOOL

perryr

Light box based on the 1965 mustang coupe. Printed on a Bambu Labs P1P using 4 colours with a single AMS.&nbsp;This version is supplied with a 12mm hole in the back plate.&nbsp;I use 12V LED COB strips connected to a 12mm socket piece, and power it using an AC adapter. A full explanation of the lighting process I use can be found at <a target="_blank" href="https://makerworld.com/en/models/www.geelonghandmade.com" rel="nofollow noopener">www.geelonghandmade.com</a>&nbsp;A version without the writing on the back and without the 12mm hole is also available at the above web site.&nbsp;The Fusion 360 file is also available if you would like to customize the design.

1965 Mustang Coupe

MUSTANG LIGHTBOX

xallex digital design

Replaceable HEPA/Carbon Charcoal Filters for Bambu X1C/P1S Chamber Exhaust Stackable Chamber Exhaust port filter housing for either HEPA or Carbon Charcoal filters. &gt; Housing mounted to printer using existing threaded holes on the printer, using x4 M3x6mm button cap screws. &gt; Mesh Layer and Top mounted to Housing using x4 M3x6mm button cap screws. &gt; Filter Cartridge slides in from the side. &gt; Optional Housing with modification for use on printers that have the AMS Hub installed are included&gt; Optional TPU gaskets are included &gt; Optional Additional Filter Housing can be added to use multiple filters, this is fitted between the Housing and the Mesh Layer using x4 M3x25mm button cap screws. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. Use recommendations: - Use top glass riser to increase airflow - Set the chamber fan to 70% or higher. HEPA Filters: (<a target="_blank" href="https://amzn.to/49Uu6vF" rel="nofollow noopener">https://amzn.to/49Uu6vF</a>) Cut-to-Fit Carbon Pad for Air Filters Charcoal Sheet (<a target="_blank" href="https://amzn.to/4bd4iw1" rel="nofollow noopener">https://amzn.to/4bd4iw1</a><a target="_blank" href="https://amzn.to/49OXIe5" rel="nofollow noopener">)</a> Screws: x4 Qty M3x6mm Button Cap screws to mount Housing to printer (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) x4 Qty M3x6mm Button Cap screws to secure Top and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) If optional second filter housing is used: x4 Qty M3x25mm Button Cap screws to secure optional second filter housing, Top, and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) Material: Silver - IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4dhLtK4" rel="nofollow noopener">https://amzn.to/4dhLtK4</a>) Light Blue -IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4deSoUc" rel="nofollow noopener">https://amzn.to/4deSoUc</a>) Red - Hatchbox (<a target="_blank" href="https://amzn.to/3Ukwbvc" rel="nofollow noopener">https://amzn.to/3Ukwbvc</a>) - Design Update - 4.12.24 - - Included an optional filter tray addition to use both filters simultaneously. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. - Increased the diameter of the holes in the Top, and Mesh parts to allow the M3 screws through. - Added optional TPU gasket files. Thanks <a target="_blank" href="https://makerworld.com/en/@wiczdesigns" rel="nofollow noopener">@wiczdesigns</a> for the suggestions. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-12_b002cd1bffc35.jpg">   - Design Update - 4.11.24 - I have added main housing to accommodate printers that have the AMS Hub installed. Thanks to user @redborder for the suggestion and reference photos. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-11_f7d508262327d.png"> - Design Update - 4.9.24 - I have added a filter box and lid for use with Carbon/Charcoal Filter Material, to extend the carbon filtering from the chamber exhaust.

HEPA/Carbon Filters Bambu X1C/P1S Chamber Exhaust

HEPA FILTER

BODY3D

This waste really makes 3d printing sad ! So I created a little waste Eater to make it a little more joyful haha =)&nbsp;And of course, it is printable without supports !&nbsp;If you like these model, don't hesitate to like and follow =)&nbsp;IMPORTANT :&nbsp;If you want to sell 3D prints from my designs&nbsp;Please become a Patreon here : <a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener">https://www.patreon.com/BODY3D</a>&nbsp;Or Become a Triber here : <a target="_blank" href="https://www.myminifactory.com/users/BODY3D" rel="nofollow noopener">https://www.myminifactory.com/users/BODY3D</a>&nbsp;All my Links : <a target="_blank" href="https://beacons.ai/BODY3D" rel="nofollow noopener">https://Beacons.ai/BODY3D</a>

Waste Eater ( A1 Mini )

poop collector a1mina

Robin

Four 90 degree curves for Govee LED strips Short versions have a 25mm straight part, long versions 50mm.  The one that&#39;s less narrow has an inner radius of 25mm.Screw holes are optional, I used 3m double-sided tape.

Govee Led Strip 90 Degree curves

GOVEE

iprintshit

The Cornhole Caddy by Nofsky IndustriesProtect your backyard essentials with the Cornhole Caddy, A modular stand with adjustable height! The Cornhole Caddy is perfect for those nights in the backyard or on camping trips! It can be taken down  for storage and elongated for the most optimal spot! Hold 2 brews and your phone (plus more!) comfortably wherever you set up camp!&nbsp;Everything can fit on a single printbed (256x256x256) to make printing easy. The printed threads make for a painless tool free install! More parts coming in future updates! Download your own Cornhole Caddy today!&nbsp;Update 3-31-24<ul><li>Added Baseplate for flat surfaces! (new print profile and raw stl available)</li></ul>Update 4-4-24<ul><li>Fixed thread clearance issue on all parts.</li></ul>

The Cornhole Caddy

cornhole caddy stakes

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.

Turtle Art Hueforge

TURTLE

Flori_

This is a remix of a model by @EmaKralova(https://makerworld.com/en/models/224716#profileId-242637) I added different size options.The &#39;small&#39; version is the original by @EmaKralova&nbsp;Lengths:Small: ca 140mmMedium: ca 220mmLarge: ca 290mm&nbsp;Advice:The &#39;large&#39; zip tie only fits on the 265mm² build plates diagonally.&nbsp;I recommend printing with TPU&nbsp;If you just want the ‘small’ version, please check out the original design (https://makerworld.com/en/models/224716#profileId-242637)

[Remix] reusable zip tie

ZIP TIES

RDesigns

The Allround Box V1.5 OUT NOW! <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a>This is the older Version of “The Allround Box”!Please switch to the new one, if you don&#39;t need replacements parts from this site.&nbsp;-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;&nbsp;The box is assembeld with pieces of filament, so screws arn&#39;t needed anymore!&nbsp;If the filament falls out of the hinges, glue the ends a little with super glue.&nbsp;For the sealing, TPU can be used.&nbsp;Attention:Pay attention to the comments in the parametric design in Fusion 360!&nbsp;Release Notes:27.03.2024<ul><li>The V1 avaliable now!<ul><li>Screws are replaced trough small pieces of Filament that perfectly fit in!</li><li>The Design in Fusion 360 is Parametric, most of the dimension can be changed.</li><li>The Latch design stands out with it&#39;s wheels, which lock into place perfectly!</li></ul></li></ul>31.03.2024<ul><li>Update V1.2!<ul><li>Some model issues fixed.</li><li>Better fit for non sealed boxes.</li><li>Filament holes widened</li></ul></li></ul>05.04.2024<ul><li>Update V1.3<ul><li>Some parametric design issues fixed.</li><li>TPU seal geometry more water resistant</li></ul></li></ul>12.06.2024<ul><li>Version 1.5 OUT NOW!</li><li>You can find it here: <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a></li></ul>&nbsp;

Rugged Storage Box V1 (Parametric, Screwless) 

STORAGE BOX

justinpig

This is a mini version of a retractable katana, with a total length of about 33cm after retracting. This version is printed in one piece.&nbsp;notes: 1. When using an a1 series printer, make sure the brim is turned on to prevent the printed matter from being thrown out when the heated bed moves. If the first layer cannot adhere well, you can heat the heated bed or apply glue to effectively adhere to the first layer. 2. This printout was tested OK using x1c and a1mini.&nbsp;Have fun~

collapsiable katana mini (single color)

KATANA

Jaspyjo

Find V3 here: <a target="_blank" href="https://makerworld.com/en/models/423637#profileId-326893" rel="nofollow noopener">https://makerworld.com/en/models/423637#profileId-326893</a>&nbsp;Version 2 of my top glass riser. I added a bambulab emboss for aesthetic reasons.&nbsp;Cleanest and most simple top glass riser out there (in my opinion). No support necessary, 15% Infill, quick and easy print.&nbsp;For the P1S, likely also works on the X1C.

Top glass riser BambuLab Emboss *V2* [P1S and X1C]

RISER BRACKET

Longracks Labs

Mashup of Dry Pods and Desiccant tray models for using desiccant beads in AMS.&nbsp;v2 in Raw Model download includes update includes:<ul><li>Plate with DryPods (0 degree offset), and trays (same as v1)</li><li>Plate with DryPod at 30 degree offset</li><li>Plate with ‘skinny’ DryPods as needed (with AMS wear preventer, etc.)  </li></ul>Drop a Boost if you are happy with this print!

Dry Pods and Desiccant Trays for AMS

DESSICANT HOLDERS

Xander Designs

Attention all car enthusiasts! Introducing the multi-part spark plug lamp.Each component is designed with threads, ensuring effortless assembly without the hassle of glue. &nbsp;This free version has a sleek plain white shade but should you want one with an iconic spark plug brand logos like NGK, DENSO, BOSCH, CHAMPION, ACDELCO, VOLVO, AUDI, MERCEDES or any other design, they are all available with my new updated version <a target="_blank" href="https://www.printables.com/model/831445-spark-plug-lamp-brands" rel="nofollow noopener">here</a>. Additionally, a light strip pole is provided for seamlessly wrapping LED strip lights, ready to be inserted into the ceramic fixture.  For those that have a Bambu Lab light kit, scale the model up to 140% and the light kit fits perfectly making the model stand 45cm high.<figure class="media"><oembed url="https://www.youtube.com/watch?v=zCv-JbLQdSQ&amp;t=191s&amp;ab_channel=XanderDesigns"></oembed></figure>&nbsp;UPDATE March 2024While i aim to keep this model free for personal use i now have a paid version which has a few improvements and extra parts.<ul><li>Brand logos for every brand spark plug and other car manufacturers. (can add more logo&#39;s on request)</li><li>Single Electrode Plug version (for wall mounting</li><li>Wall mount</li><li>Vent hole added to allow heat to escape</li><li>Scaled for your convenience 470mm Height</li><li>STEP, 3MF, STL and Bambu 3MF Files included</li></ul>&nbsp;&nbsp;This would make a great gift for any car enthusiast, mechanic, engineer, technician, automotive professional, collector, diy enthusiast or anyone else that appreciates unique novel home decor.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;

Spark Plug Lamp

NGK SPARK PLUG LAMP

Hugo

<h2>Update : I added the money clip There is now a version with and without money clip in the back.</h2>&nbsp;This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>Here are the key updates:<ol><li>The new version can accommodate 6 cards, compared to 5 in the previous iteration.</li><li>The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.</li><li>The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.</li></ol>This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.I have not yet designed a money clip for the back, but it will be included in a future update.<h3>Printing :</h3><ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3>Freeing the mechanism :</h3>Force on the slider to crack it open :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/20240310_165015.jpg#%7B%22uuid%22%3A%226fac39e0-5c87-4b27-a4d5-f723c113ad5e%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>If it is not enough, you can push the pivot on the back :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/20240310_165005.jpg#%7B%22uuid%22%3A%225b8ad44e-f5c1-49dc-be6b-8d84b6ee539c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>Enjoy :)

Cascade card wallet V2

WALLET

TwistedPrints3D

This profile is the frame/lightbox I designed to fit my litho prints.It is 230x230x3 to fit Babu labs build plate of 256x256x256. I have designed this frame/lightbox to fit the litho that are in my collection. It has a pressure fitted removable back and a lip on the front to hold the litho print with just a few drops of glue. Below is the link to my LED light strips I use. I have added a small brim to the frame plate to keep the corners from lifting.&nbsp;I will be adding more Lithophanes to my Makersworld profile, so click the follow button to see what I have and what&#39;s being uploaded&nbsp;LED Lights: https://twistedprints3d.com/products/3-pack-led-rgb-light-strip-with-remote?utm_source=copyToPasteBoard&amp;utm_medium=product-links&amp;utm_content=web

230x230x3 Lightbox Frame

LITHO BOX

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, USB or battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

VDAY BOX

jaroslavdulik19

Glock 17 Gen 4

GLOCK

laisch

With this handy little tool you can clean your carbon rods even when the lid of your bambulab printer is closed.Just put Isopropyl alcohol on the sponges, snap it to your carbon rod and move it back and forth a few times till they are shiny again.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_e4ey6ohuzxon.gif"></figure>&nbsp;<h3>Postprocessing</h3>For the sponges you can use a normal kitchen sponge (be careful to not use the abrasive ones). Cut two pieces roughly about 10x20x20mm and press them into the spongeholder.For the pullback mechanism you can either print the provided spring in TPU, or use small hair rubberbands. The spring also works in PETG but looses its strength from time to time.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_g1k0c2tnzlwn.jpg"></figure>&nbsp;&nbsp;More info about cleaning the carbon rods can be found in the <a target="_blank" href="https://wiki.bambulab.com/en/general/carbon-rods-clearance" rel="nofollow noopener">Bambulab Wiki</a>

Carbon Shine - Carbon Rod Cleaning Tool

TOOLS

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

POOP CHUTE BIN

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<figure class="media"></figure><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

AMS RISER

Jorge Rui

<h3>Introduction</h3><blockquote>3mf files are for use only on bambu studio and Orca Slicer - Latest version. Step files are available for the most excellent Prusa Slicer and others.</blockquote>&nbsp;This is my idea of a keychain. The tags are large, and the colors are bright, so maybe it's not so easy to miss. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_xyhck86v113n.jpg"></figure>This keychain is an elegant, highly customizable, and practical solution. Who has ever used a traditional keychain closet, knows that it is not always easy to put the keys there.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_gh7m00henasp.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_et9ho9yhlkf7.jpg"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_kktrixy3yq5q.jpg"></figure>It can be used with the tags, but also with simply the key (as long as they have some iron on it). It works with the magic and invisible magnetic force, if the keys are from brass to aluminum, the solution is to use one of the available tags. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_73tz8bljc3ut.jpg"></figure><h4>Smart</h4>For those who are in the home rental business, or have a home with home automation, I also added the possibility to add an <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC</a> Tag to each of the keychain docks. This way, you can give directions to your guest or automate something every time you bring your <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC Tag </a>reader close to the dock. If you don't find this interesting, just don't use the NFC Tag ;)ChallengeI leave here a challenge to those who are more comfortable with electronics, namely using and programming the <a target="_blank" href="https://en.wikipedia.org/wiki/ESP32" rel="nofollow noopener">ESP32</a>. If anyone is interested in collaborating in order to put a microcontroller in the dock, please contact me. The idea that by putting the key on the keychain and start an action is interesting. (this, of course, without using the mobile phone). NFC Tag was the simplest way I found to enable this kind of interaction, but you always need a mobile phone nearby… Well, it's not bad, but an ESP32 will be better, but then we have the battery problem… ;)<h4>How it works</h4><ol><li>Simply hold the tag or key close to the dock and the magical magnetic force will do the rest. </li><li>If you are already in the future, whenever you think it is necessary, you can bring your phone close to the dock and trigger a set of actions. I know that with iOS this is very easy through the automations in the Shortcuts app, and I'm sure that on Android it won't be difficult either. Regardless of the system and in a universal solution, <a target="_blank" href="https://www.home-assistant.io/" rel="nofollow noopener">Homeassistant </a>works great with ID tags.</li></ol>But enough about automation, that was something I decided to add and that wasn't the reason I made this keychain. <h4>Available variations</h4><ul><li>Colors for ID the dock and the tags, choose any colors you like.</li><li>3D printable labels on the dock (Garage, House, Office and Mailbox). Some more could be available for members. This you have to download here, they can be remixed, that way you can add your text.</li><li>Version to add labels as stickers.</li><li>A dock version to hang.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_7j5oec22wkpa.jpg"></figure><h3>Print instructions</h3>This project is designed to make printing easy, but there are a few things you should take into consideration.The tag has a neodymium magnet embedded in it. Therefore, it will be necessary to program a pause in the last layer where the pocket where the magnet is inserted is closed.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_1p5q6bf8f69w.jpg"></figure>These files can be remixed, so the copyrights of does is different from this one, the only way I know to make this is by creating a new project.You can download here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/38287" rel="nofollow noopener">Tags and Labels for the Keychain</a></li></ul><h3> </h3><h3>Assembly instructions</h3><ol><li>Print the parts.</li><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">Get some neodymium magnets </a>and, if you want, some <a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">NFC Stickers</a>.</li><li>Assemble the dock (this example is good for all version.<ol><li>Force the magnet on its socket (can help push it against a piece of wood, don't use metal, the magnet will break).</li></ol></li><li>The name label on the top will press fit.</li><li>For better adhesion of the parts, you can use double-sided adhesive tape. <ol><li>Something like <a target="_blank" href="https://amzn.to/3rTK3Cp" rel="nofollow noopener">this</a></li></ol></li><li>If needed, you can glue it all.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_r26u97h2ahzx.jpg"></figure> 6. If you go for the rail fixing, please choose one of the configurations available on the 3mf file. Remember that you can use the cut function on the slicer. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=nyevb4B_NB8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/nyevb4B_NB8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Material</h3><ul><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">2x neodymium magnets of 10x3mm</a> (one for the dock, other for the Tag)</li><li><a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">1x NFC sticker Tags</a> (if you plan to use them)</li><li>For the rail fixation, you will need bolts of about 4mm in diameter. </li><li>For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks ! <ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filaments used on this project</a></li></ul></li></ul><h4> </h4><h4>Development</h4>I think it might be interesting to show what's behind a finished product, so from this project onwards I can include some information regarding product development. Give some feedback if you find it interesting or if you find this irrelevant.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_nk7t1q5kb3pq.jpeg"></figure><h3>Change log:</h3><ul><li>(12-10-2023) - Added blank labels; download file: “Name_blank.step” and “Tag_blank.step”.</li></ul><figure class="table" style="width:97.1%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_8cc3cc988b56e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_d7a7c61134e7e.jpg"></figure></td></tr></tbody></table></figure><h4>Support the designer:</h4><ul><li>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</li></ul><a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>