cmroberts1982

Mangolicious

This is an RGB-LED Lamp with an infinite Voronoi-Pattern. There is also a hexagon, rhombus and weave-pattern included.The lamp works with a casual smartphone charger and a micro-usb cable.&nbsp;For this lamp you will need:<ul><li>1x NodeMCU (bases for Lolin V3 (big) and NodeMCU V2 (small) are included)</li><li>1x RGB-Strip (53LEDs of WS2812B, 60LED / meter)</li><li>6x M3 brass inserts</li><li>2x M3x8 countersunk screws (for the LED-Rod in the middle)</li><li>4x M3x8 screws (for the NodeMCU)</li><li>4x M3 nuts (for in between the node-mcu and the base)</li></ul>&nbsp;The vibrance of the colors depends on the printcolor of the panels as you can see in the pictures. The one with the rhombus pattern is printed in white. The voronoi was printed in black. You have to glue the panels into the base. Hotglue or superglue. The thicker bar on the short side is the bottom side which fits in the base.&nbsp;For the controller you need to upload the “WLED” firmware onto the chip. I won't give any support to achieve this, there are several tutorials out there. But don't remove the amp-limit in wled! Don't use a 144 LED / meter strip!I built the first lamp 2 years ago which has ben lit for over 1000h now.&nbsp;If you want, you can glue one single LED on top of the rod, so the top of the lamp also lights up. Secure the LED-Strip with super-glue.Attach the LED-Strip to the rod before assembling the rod to the base.&nbsp;There are three 3mf-files included:One standard profile for most of the parts which works for me (P1P with eryone filament)One for the bases with PETG-Support (makes removing the supports very easy. Some tinkering necessary)One for the diffusor in vase mode (The vase-mode profile is by far not perfect!)

Hexagonal RGB-LED Voronoi Lamp

Jefffrey

These brackets can be used as connections for 2020 Aluminium profiles. The 3MF contains: -Corner Bracket-Double corner Bracket-T-Bracket

2020 Profile Brackets (Corner Bracket, Double Corner Bracket, T-Bracket)

8020

C4talyst

A simple itx case,BAMBULAB P1P PRINTER or any printer with the build volume larger than 256*256mm*20mm RECOMMENDED. Compatibility: GPU SPECS:250MM GPU OR SHORTER WITH LESS THAN 135MM WIDTH. CPU COOLER:MAX HEIGHT 135MM MB:17*17CM，17*19CM，17*21CM  Prepare: 400g+ ABS FILAMENT(if you dont need a riser(the file BTM.stp))/500g+absOR 600g/750g+ petg FILAMENT Knurled nuts: M3*3*4.5 14 pcs  SCREWS: M3*16 4pcs M3*10 6pcs at leastVERSION: 0.1&nbsp;VER 0.2 is cancelled for some structure problems,However a new chassis will be published soon,sorry for put off too long.Screws are annoying,so the new one in design is trying to avoid visible screws.&nbsp;ITX/MINI-DTX 3d打印直插SFX机箱 兼容性：25cm长度显卡，宽度135mm。塔式散热器135mm。ITX/MIDI-DTX主板 17*17，17*19，17*21 安装需要: 400g+ ABS耗材（不打印底座（可竖放用））/500g+ABS耗材滚花螺母: M3*3*4.5 14 pcs  螺丝: M3*16 4pcs M3*10 6pcs 至少以上数量螺丝暂未设计开关位置，可自行加装版本: V0.1&nbsp;0.2版本由于一些结构问题被取消，不过好消息是新版本的机箱在不久后就会发布，抱歉拖了那么久螺丝露出来着实不好看，新设计会试着隐藏螺丝&nbsp;BY:C4talyst  -8th FEB 2024

9.4L ITX chassis "LTX VENT-M" ITX机箱 9.4L

mail.iou

These are the Christmas ornaments, there are 2 pieces in total, hope you all like it.&nbsp;Print Profile:Profile1: Predefined filaments of 3 colors: black, white, red.A1 mini: A1 mini available.4 colors: Predefined filaments of 4 colors: black, white, red and green.

Cat and Dog Christmas Ornaments

Crimbus

luke3veritt

This is ring fidget that spins in all directions. You can put it on your finger to play with or just play with it in your hand.

Fidget Ring Spinner

Toys

TheMaker

I designed these aids because my kids can't hold the sticks well yet. There are different versions available so that you can adjust the respective hole size to the sticks.&nbsp;Nozzle: 0.4mmLayer Height: 0.2mmFilament: PLASupports: NoInfill: Not necessary

Chopstick Aid

Evo 3D

Sometimes you just need something to hold those cables under the table not hanging down LOL.Double sided adhesive tape is required.

UTCO the UnderTable CableOrganizer

braga3dprint

The 3D model of a simple lightbox is a tribute to the beloved world of creativity and building. This minimalistic yet iconic design showcases a symbol of imagination and play. When illuminated, the lightbox brings a sense of nostalgia and fun, making it an ideal addition to any enthusiast's collection or a child's room. Let the warm glow of this lightbox kindle the spirit of innovation and creativity in your space, paying homage to the timeless joy of building blocks. It's not just a lightbox; it's a beacon of inspiration. 🌟🧱🌈 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB or go wild with RGB - as long as the LED density isn't too low (very few LED's per meter) you should be able to achieve a good result- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Brick Building Block Lightbox LED Lamp

GAB-3D

This is a Remix of the Nozzle Box it is vertical and is more compact like Nozzle Organizer.Holes for nozzles is tighter so they do not fall.Can be printed in any material, with 0.2 layer height.You can print the base and change the color with Prusa Silcer at layer 51, see images.No support are needed.&nbsp;

Nozzle Box Compact Edition

Tools

maCyo42

<h2><a target="_blank" href="https://makerworld.com/en/models/133452#profileId-155723" rel="nofollow noopener">NEW AMS Riser V2 is released</a></h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2024-01-17_44483ed08d787.gif"></figure> <a target="_blank" href="https://makerworld.com/de/models/54960#profileId-56527" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-11-01_c95b7e28a2973.png"></a> Mods<figure class="table" style="width:93.96%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image"><a href="https://makerworld.com/de/models/45759#profileId-47533" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_67b62d6e14237.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image image_resized" style="width:85.17%;"><a href="https://makerworld.com/de/models/53455#profileId-55205" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_5e484d88c7c34.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image image_resized" style="width:96.15%;"><a href="https://makerworld.com/de/models/57617#profileId-59380" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-11-05_42be75b9c601c.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width:92.55%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:3px solid hsl(0, 0%, 0%);text-align:center;">NEW</td><td style="border:3px solid hsl(0, 0%, 0%);"><figure class="image"><a href="https://makerworld.com/de/models/82112" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-12-03_c9af0f3d5a3a4.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);"><figure class="image image_resized" style="width:88.08%;"><a href="https://makerworld.com/de/models/53336#profileId-55112" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_07c5c51104054.png"></a></figure></td></tr></tbody></table></figure>First i would like to thank you Ben Levi for this awesome Design! I like the Design of Ben very much but i want to use a full around the top Lightstrip so i started my Remix. Then.. one came to another. Like you know it when you walk around and see many Things you can design to print. :-D<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://www.surveymonkey.com/r/JQ6DQFS" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-26_5365ec7b49877.png"></a></figure>@ https://www.surveymonkey.com/r/JQ6DQFS</td></tr></tbody></table></figure>X1C Owners ! If you have an X1C Printer heres my Remix of the Front Dash Parts for your Printer<a target="_blank" href="https://makerworld.com/de/models/45759#profileId-47533" rel="nofollow noopener">https://makerworld.com/de/models/45759#profileId-47533</a>  BOM & Status <img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-25_cfe77cd6608b6.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-25_d0f1103deaca6.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-11_53c0c0386bc29.png"></figure>

fun

8020

pC

Crimbus

Toys

TK

Org

DJ

Tools

Riser