cmendres400

Vigo 3D

Happy Wife - Happy Life ! Coaster ROUND Edition Everybody knows that :) I uploaded a easy to print 2 color version for AMS user. I will upload a profile with 4 coasters too. If you use it with hot drinks please usw PETG or better ASA/ABS filament. For decor or cold drinks (up to maybe 30°C) PLA is enough. <a target="_blank" href="https://makerworld.com/de/models/123717" rel="nofollow noopener">Click here for the square Edition</a>

Happy Wife Happy Life Coaster round- Funny Thing 

DatumCAD

A sliding limit block that can be attached to your existing steel ruler. Incorporates an easy to use thumb cam lock with positive snap shut to ensure the ruler does not slip once held. Allows you mark-out / scribe dimensions simply & repeatably. The wide face of the block helps to keep square up against the object.&nbsp;To avoid too many variations, this listing is intended to capture the most common sizes for MEDIUM steel rulers, usually around 300mm (12") long. Most of which fall in the range of 25-27mm wide. For other ruler widths click on the below links to listings:<ul><li><a target="_blank" href="https://makerworld.com/en/models/213556#profileId-233110" rel="nofollow noopener">SMALL Steel rulers, 15-20mm wide</a> (Most 100-200mm / 4-8" Long Rulers)</li><li><a target="_blank" href="https://makerworld.com/en/models/213633#profileId-233172" rel="nofollow noopener">LARGE Steel rulers, 28-30mm wide</a> (Most 400-600mm / 16-24" Long Rulers)</li></ul>Simply measure your rulers width and thickness and pick the Print Profile with the nearest dimensions in its title.&nbsp;Tip: this is made super easy if you are measuring with digital calipers, and just round down/up any decimal places……examples below;<ul><li>if your ruler measures 25.1mm wide x 0.75mm thick, you would chose the “Rulers upto 25mm x 0.8mm” profile.</li><li>if your ruler measures 26.3mm wide x 0.95mm thick, you would chose the “Rulers upto 27mm x 1.0mm” profile.</li></ul>To assist with selection I have uploaded an Excel file in the Documentation (bill of materials section). It is titled ‘Limit Block Size Checker’ and will do all the math to let you know the best profile to chose…..or let you know if there isn't currently a suitable profile available.&nbsp;Fasteners: For these limit block sizes you will need 2x M3 fixings which act purely as strong pivot axles to the cam lever. Optimally these would be 16mm long but you could also use any M3 fixing down to as low as approx. 8mm long.&nbsp;Assembly:<ul><li>Insert the CAM lever into the Housing. Tip: Insert with the level in the closed / horizontal position as this is the angle it slides in easiest.</li><li>Insert M3 Fixings. Tip: The fixings should pass though the limit block housing holes unhindered, but then will need lightly screwing into the CAM lever handle hole which has been deliberately sized so as to require some tightening without to much force. (Remember these are just acting as pivot points, no need to tighten down hard, but equally the fixing should not want to fall back out either.)</li><li>Insert Ruler: Top Tip: The ruler is far easier to push in from the front (through the small slot in the block). This is due to the mechanics of the CAM.</li><li>Enjoy - your sliding limit block is now ready to use. Note: The first few engagements of the thumb lock may be a little hard but should ease up slightly after a few uses. If not you could try printing a smaller CAM lever from another Print profile of the same width.</li></ul>I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough & are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/677805/2024-02-29_1d4977f932d5.png"></figure>&nbsp;

Limit block (Medium) Steel Rulers

Tools

humebeam

Hydra PRO - Advanced Bambu Lab AMS

AMS Upgrades

Frank3D

An easy and fast printable rack for acrylic colors, like Vallejo, Army painter and other one that used similar shape of bottles. There is also a piece for brushes of different measures.&nbsp;I aslo uploaded a larger version, for stock up to 24 colors. You can find it <a target="_blank" href="https://makerworld.com/it/models/133418#profileId-144695" rel="nofollow noopener">here</a>

Vallejo/ Army Painter and brushes rack

Painting

3D_Printing_Enjoyer

Your mint died again because you forgot to water it… We all have been here many times. It's sad but you have to move on, speaking of moving on… Move yourself to your slicer and print this beautiful pot, i know you want it! (or at least you need it) I almost forgot! Would you like to have a little handy water indicator for your little handy auto watering flower pot? Good news for you! All you need is toothpick, some super glue and you are ready to go! If you want to make it there are 3 extra elements you need to print, good luck!

Modern spherical flower pot with water reservoir and water level indicator

Plants

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

Pastamatic  Filament Spool Winder for Bambu X1C/P1P AMS (level winder with self reversing leadscrew)

Printing Tools

alexfehr1987

These small covers help to silence the X1C by covering the openings of the belt tensioners. A small 6x3mm Magnet holds them in place. Also they prevent dust from entering the printer.

Fun

Tools

AMS Upgrades

Painting

Plants

Printing Tools

X1C Upgrades