The weather is warming up and the birds are hungry! This simple print enables you to put out fresh oranges for our feathered friends. I was skeptical at first but we went through a bag of oranges in ~4 days so the birds definitely appreciate it! Check it out and let me know what you think!

Good news, everyone! After over a year of daily use, I decided it was time to make some tweaks to my wallet design. The main feature was rounding the edges to improve the hand-feel (if that's even a thing?). That ended up being more complicated than I realized and required a complete re-build, so I made it parametric in the process. If you prefer the squared-edge design, you can also customize that one too. Thanks for checking it out!

If you're sick and tired of disorganized boxes and loose tea bags cluttering up your space, I've got the solution for you! You can print these simple, attractive and functional containers to clean up your tea bags. Enjoy!

Hey friends, be sure to check out my new, parametric scoop model! This was born out of necessity and has ended up being pretty handy, so I figured it was time to share it with the community. Thanks for checking it out!

Our store-bought bee houses were at the end of their life and rather than go out and buy more, I opted to design a modular bee house to take their place. You can print as few or as many modules as you want and place them around your yard and garden to support our vital pollinators. With Spring right around the corner, now is the perfect time to print these and hang them up! (Note: requires the purchase of removable tubes, conveniently available online)

Tired of your ASA and ABS prints warping? Install a chamber heater and kiss those worries goodbye! I installed a Creality Chamber Heater on my X1C and wanted to share the process and accessories in case anyone else is considering taking the plunge. The X1C is a great machine and with this upgrade, it really shines. Note: I assume this would also work for the P1S, but I haven't tried it so proceed at your own risk if you want to try it out.

Alright everyone, after 6+ months of use and user feedback, I'm ready to release an update to my free-spinning cord, cable & filament winder. Don't toss those empty spools in the trash; repurpose them using this handy model! Thanks for checking it out!

What started as a simple request for a pencil case led me down quite the rabbit hole. Here's my take on a parametric, print-in-place, container with a floating hinge. Most, if not all, designs require the lid and case to be roughly the same size but this avoids all that. The dimensions of container can all be customized for your exact needs, with independent case and lid sizes. I'll be the first to admit that this won't change the world or cure cancer, but it's been a fun project nonetheless.

After many requests, I've uploaded a new model to account for the newer, larger, adhesive strips. Be sure to check it out if you used the original and find yourself with the newer strips. Thanks!

My most popular model, the Bottle Transfer Funnel, was long-overdue for an update and some much-needed improvements, so I'm happy to share them with y'all today. The clips have been redesigned and a larger size has been added. More importantly, perhaps, we've added two additional, larger, funnels since that was the #1 complaint from users. There are a handful of other tweaks so be sure to check it out. Thanks!

I've updated my Simple Christmas Card/Postcard/Picture Holder Display Stand so now it's parametric and can be dialed in to fit your specific needs! Thanks for checking it out!

Every year we get more and more of these postcard-style Christmas cards but don't have a way to display them. I created this little stand to print quickly and easily and show them off with minimal interference.

Did your garden hose sprayer trigger give up the ghost like mine did? Well, don't throw it away - just print a new one for it!

My girlfriend asked me to print the Book-shaped Bookmark Holder, which is a cool little model that was asking for some upgrades. So, I rebuilt it from scratch in Fusion so it can easily be printed in multi-color, with OR without an AMS. I also made it parametric so people can adjust the tolerances to accommodate their specific printer and filament. Check it out and let me know what you think! Thanks!

Alright folks, it's here! I'm proud to announce I've released an update for my candy dispenser after months of testing and user feedback. The biggest improvement is a more robust funnel as well as an agitator system to prevent candy from getting jammed up. There's also a blank/no text base after MANY requests as well! Thanks for checking it out!

Here's an upload of a reverse-engineered Winnebago Rear Bumper End Cap. They came out pretty well for a buddy who was replacing the parts on his camper.

I'm starting to 'get' the whole Gridfinity thing so I made my first custom storage bin. Check it out!

Sure, there's already ~6,000 build plate stands on MW, so why not make it 6,001?? I think what sets mine apart (that I could tell after a quick search) is that it's customizable and has a curved slot so it securely holds plates (of any size!). I don't think there are any other designs with those features so maybe you might find this useful. Thanks for checking it out!

Here's a customizable, parametric, desk organizer to help tidy up your space. You can adjust the size and quantity of each of the little slots and everything *should* update accordingly. Thanks for checking it out!

Hey everyone! Here's my latest upload - a customizable, print-in-place, Kakusta-style case. It's been in the works for a while but it's finally at a point where I feel like it's ready to share. Thanks for checking it out!