chuckc81

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, Bambulab USB or Amazon battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Valentines

cyanidesugar

Cute little skull keychains that use filament layer swaps to create an ‘X-ray’ or glow effect. Fun little gifts for Halloween, or for the general horror enthusiast! &nbsp;You can swap out the colours for other colours if you prefer - just replace green with the colour of your choice. &nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm&nbsp;Filaments Used: - PLA Kingroon Black Transmission Distance: 0.4 - PLA BambuLab Basic BambuLab Green Transmission Distance: 8 - PLA Kingroon White Transmission Distance: 8&nbsp;Swap Instructions: - Start with Black - At layer #24 (1.08mm) swap to BambuLab Green - At layer #35 (1.52mm) swap to White for the rest.

Glow Effect Skull Keychain 

Keychains

Trella 3D Prints

Thor fridge magnet (7mm x 4mm) added pause in the .3mf

Thor Multi color refrigerator magnet 

Magnets

3D Printing Room

I was always a fan of lithophane models and this year I wanted to surprise my brother and sister with some cool Christmas tree decorations so I designed this globe which has a small shaft that holds the lithophane photo and it's easy to change the picture whenever you please. I also added 2 holes on the sides because I wanted to use the Christmas tree lights as the light source for the lithophane, but you can cover those up if you come up with a better solution. At first, I tried adding a CR2025-powered candle, but I didn't find it bright enough.Print instructions:Print the model face down and only add support for the lithophane channel, unless your printer can handle that(but mine didn't, I own a Prusa mini+). Optional, you can add supports for the light holes, but those are not mandatory. The inner dome does not require any kind of support so don't waste any material :DLithophane generation instructions:I generated the lithophane on <a target="_blank" href="https://lithophanemaker.com/Lithophane%20Tag.html" rel="nofollow noopener">https://lithophanemaker.com/Lithophane%20Tag.html</a> and I've used the following settings(the ones marked with * would be required to fit the model I designed, so if you adjust the model make sure also to adjust these settings):<ul><li>Image Type: pos</li><li>Hoop: no</li><li>Lithophane Resolution: 0.2</li><li>Radius*: 25</li><li>Frame Width*: 2</li><li>Frame Height*: 4</li><li>Hoop Width*: 10</li><li>Hole Diameter*: 5</li><li>Maximum Thickness*: 3.8</li><li>Minimum Thickness: 0.6</li><li>Center in X: 0.5</li><li>Center in Y: 0.49</li><li>Circle Scale: 0.98</li></ul>Note: the last tree settings should be adjusted based on the image you use.

Valentines

Keychains

Magnets

Christmas

Jeep

Thanksgiving