christopherwalters1986

Joe Mike

<p>This is a desktop stand that can accommodate an Apple iPhone Magsafe charger, Apple Watch Charger, and Airpod Charger (through lightning).</p><p>The design was originally made by JIPyro and posted on Thingiverse. I have modified the design and shored up some tolerances.</p><p>There are two versions: One for MAX size iPhones and one for all the rest (non-max size). The non-max size version is shorter to accommodate the camera housing and cases. </p><p>The non-max size will fit MAX phones as well, but the MAX size stand WILL NOT fit standard size phones (camera clearance issues). </p><p>Print with PLA or PETG of your choice. Resolution doesn't matter. For best results, print internal perimeters first.</p><p>&nbsp;</p><p>The fit of the watch puck and magsafe puck may be very tight. Place the dock on a table, face down with the puck in the hole and gently press down to seat it.</p><p>This has been tested and fits the original Airpods, Gen 2, Gen 3, and Pro.</p><p>Tested and works with all iPhone 12 and 13 models.</p><p>NOTE: You will need to have a magsafe compatible case as the phone needs to grip via the magsafe to hang on the stand.</p><p>NOTE: The lightning cable used in this design is the OEM Apple USB-A to Lightning cable. The OEM Apple USB-C to Lightning WILL NOT FIT! It has a larger housing around the Lightning connection. Check the Remixes to see if there is one with the larger hole.</p><p>I also used stick on rubber feet to keep the stand from sliding. More specifically, these: https://amzn.to/3FzI4qC</p><p>There is a known error in the mesh (back of the slant). The file still slices correctly.</p>

New Version: 3 in 1 Apple iPhone Magsafe Charger with Apple Watch and Airpod charger

Apple 

make 3D

<p><strong>The Perpetual Calendar</strong></p><p>&nbsp;</p><p>A fully 3D printed calendar. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts. <br>If you don't have an AMS unit, you can just print the date/month tiles in one color - Then you use a Posca Marker or similar to add the date and months.</p><p>&nbsp;</p><p>I seperated each color print (besides the date/months tiles) to individual print plates. Please move these around as you please for faster or more eficient prints.</p><p>&nbsp;</p><p><span style="color:#E14747;"><i><strong>NB: When assembling the calendar please only tighten the axis so you can still move the date and month individually.</strong></i></span></p><p>&nbsp;</p><p><strong>The indicator tiles needs to be inserted in this order.</strong></p><figure class="image image_resized" style="width:56.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/467143/2023-12-30_2ce15f6f96ba7.png"></figure><p><span style="background-color:hsl(0,75%,60%);color:hsl(0,0%,100%);"><strong>NOTE: The two housings are not the same.</strong></span></p><p><span style="background-color:hsl(0,75%,60%);color:hsl(0,0%,100%);"><strong>The centerblock one for the days is </strong></span><span style="background-color:hsl(0,75%,60%);color:hsl(0,0%,100%);font-size:20px;"><strong>31,4mm</strong></span><span style="background-color:hsl(0,75%,60%);color:hsl(0,0%,100%);"><strong> - The centerblock for the months is </strong></span><span style="background-color:hsl(0,75%,60%);color:hsl(0,0%,100%);font-size:20px;"><strong>28,8mm</strong></span></p><p>&nbsp;</p><p><strong>If you’re having issues with adhesion in general with your printer - please use the print profile with added brim to the threaded axis. </strong></p><p>&nbsp;</p><p><span style="color:hsl(0,75%,60%);"><strong>Please have a look at this assembly video I've made. If you follow these steps it's a very simple assembly.</strong></span></p><figure class="media"><div data-oembed-url="https://youtu.be/XVZG9G0sLQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/XVZG9G0sLQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p><span style="color:hsl(0,75%,60%);"><strong>This video shows how to orient the date tiles so the calendar works as intended.</strong></span></p><figure class="media"><div data-oembed-url="https://youtu.be/AJB0iBZT9bc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AJB0iBZT9bc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p><p>Please <strong>make sure you print bed is clean</strong> when printing the multicolor parts to ensure maximum adhesion.</p><p>&nbsp;</p><p><span style="background-color:hsl(0,0%,0%);color:hsl(0,0%,90%);"><i><strong>Due to the nature of 3D printed parts being very light, you might encounter that the tiles won't fall down immediately. If this happens just give the housing a little tap and it should fall into place.</strong></i></span></p><p>&nbsp;</p><p>My calendar is printed with these filaments:</p><p>Sunlu PLA+ White <i>(I am having bed adhesion issues with this filament - I recommend Bambu PLA White instead)</i></p><p>Sunlu PLA+ Black</p><p>Bambu Lab PLA Basic Orange<br><br><strong>UPDATE 31-12-2023:</strong></p><p><strong>Uploaded a new print profile. Version V1.1</strong></p><p>Made a few modifications to the two housings so the tiles would fall down more consistently.</p><p>This update also reduces the print time by more than 1 hour.</p><p>&nbsp;</p><p><br><strong>UPDATE 08-01-2024:</strong></p><p>Some users have been complaining/leaving low ratings about the ironing of the tiles or bed adhesion. <br>Please modify this yourself within Bambu Studio if your printer is not well calibrated or maintained. <br>Also, make sure your printer bed is clean from any grease. <br><br>I've had zero issues with my own prints. both ironing and bed adhesion. <br>Printed on a P1S.</p><p>&nbsp;</p><p>&nbsp;</p>

"Date Keeper" Perpetual Flip Calendar (Fully 3D printed)

random

chilman408

<div><h1>Summary</h1><div><p>This is a center console tray (with coin tray) remix from jonco223's design.  The original design is great but I just have some pet peeves that I needed to modify...</p><p>The following are the modifications:</p><ol><li><p>Fix - The wall thickness below the coin tray is too thin for 0.4mm nozzle to print, I was getting a pin-hole in my original print.</p></li><li><p>Fix - The step-down from the top ledge is rubbing against the center console cover.  I recessed it back 10mm.  This problem will show up if you plan on flocking the tray - the rubbing will rub off the flocking fibers and the paint.</p></li><li><p>Mod - Added a partial opening in the front of the tray to allow cable or light to come thru from the bottom of the center console.</p></li><li>Mod - Rounded out most of the straight edges in the tray as (and I'm still learning) sharp corners don't stick to flocking fibers too well.</li></ol></div><h1>Print Settings</h1><p class="detail-setting printer"><strong>Printer: </strong>                         </p><div><p>JGAurora A5</p></div>                                    <pre><code>                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></code></pre><p></p>                                    <p class="detail-setting supports"><strong>Supports: </strong>                         </p><div><p>No</p></div>                                    <pre><code>                                            <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></code></pre><p></p>                                    <p class="detail-setting infill"><strong>Infill: </strong>                         </p><div><p>30%</p></div>                                    <pre><code>                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Very easy print, nothing to worry about.</p></div></code></pre></div>

Tesla Model 3 Center Console Tray (Modified from jonco223) 

Tesla 

rostap

<h5><strong>News</strong></h5><ul><li><i>March 20, 2022 added bigger hook</i></li><li><i>March 21, 2022 added USB flash drive holder</i></li><li><i>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</i></li><li><i>March 21, 2022 added box (screwed with M4x10 screw)</i></li><li><i>March 21, 2022 added 2 wall parts (224x190 and 293x271)</i></li><li><i>March 22, 2022 added SD card holder(screwed with M4x10 screw)</i></li><li><i>March 22, 2022 added USB flash drive holder (screw in no need)</i></li><li><i>March 22, 2022 added box (screw in no need)</i></li><li><i>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</i></li><li><i>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</i></li><li><i>April 4, 2022 added shelves (4 dimensions)</i></li><li><i>April 6, 2022 Added drawers (found as a </i><a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow"><i>remix</i></a><i>)</i></li><li><i>April 12, 2022 Added wrench hooks (2x)</i></li><li><i>May 6, 2023 Added more step files</i></li><li><i>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</i></li></ul><p><strong>Don't forget to look at other </strong><a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow"><strong>remixes</strong></a><strong> - there are a lot of interesting modifications and accessories</strong></p><p><a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow"><strong>https://www.reddit.com/r/honeycombwall/</strong></a></p><h3>Honeycomb wall</h3><p>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. </p><p>You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure><p><i>Choose the correct part size for your printer, or use </i><a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow"><i>https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</i></a><i> for a custom size.</i></p><h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3><p>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><h3>Fasteners and parts for attaching hooks and objects</h3><p>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. </p><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><h3>Hooks and holders</h3><p>This is space for new holders and hooks which will be added as needed. </p><p>Hook bottom and side is prepared to insert to the empty insert part. </p><figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure><p>&nbsp;</p></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><h3>Other parts</h3><p>This is cover for the connecting part which is used for hiding the screwer.</p><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure><p>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. </p><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

pegboard

Hollingsworth Design

<p>This is a basic webcam stand that has a simple, yet refined shape and is 100mm tall. It accepts the standard size 1/4" - 20 tripod mount screw size. The fore/aft center of gravity is great for my Nexigo N60 camera, but yours might differ slightly.</p><p>If you don't have a tripod mount screw already, you can print one! I highly recommend <a href="https://www.printables.com/@Vector3dArt" rel="nofollow"><strong>@Vector3dArt</strong></a>'s excellent model <a href="https://www.printables.com/model/224286-camera-webcam-screw-14-20-unc" rel="nofollow"><strong>Camera / Webcam Screw - 1/4" - 20 UNC</strong></a><strong>.</strong></p><p><i>Print this model on its side (edge) without supports.</i></p>

Apple

random

Tesla

pegboard

pc stuff