chete.alvarez

Wearables

Darrare

Holds screwdrivers big and small on your honeycomb storage wall

Screwdriver holder for HSW

Natamaker

It is convenient to put a modifier at 80% in the area of the hooks, so that it gains more strength

skadis dremel

Skadis

KYZ Design

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

Soportes

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Filament Spool Winder

Herramientas

squinn

A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes.&nbsp;The STLs for three different sizes of each style are included here for convenient printing. This model is fully parametric though, and so the Fusion360 files are included for those that would like to generate different sizes or refine the model further.

Single & Dual Locking Carabiner (Parametric)

sujecion

Jorge Rui

<h2>Description</h2>This is a small and easy to print scraper tool, inspired on 2 pré existing models:<ul><li><a target="_blank" href="https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag" rel="nofollow noopener">Bed Scraper</a> by JernejP.</li><li><a target="_blank" href="https://www.printables.com/model/122894-hexscraper-printbed-scraper" rel="nofollow noopener">HexScraper - Printbed scraper</a> by visle</li></ul><h3>Available Modules </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/119274/2023-10-25_09d1d8510aac5.jpg"></figure><h4>Prepared housing modules for Bambulab 3D printers:</h4><ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a><ul><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">Various sizes of pockets with lids.</a></li></ul></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li><a target="_blank" href="https://www.printables.com/model/557727-case-with-lid-for-mmss" rel="nofollow noopener">BOX with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for MMSS</a></li></ul>&nbsp;The idea was to create a model, easy to print and small, since it is an object with high wear, having to be replaced in a short time.This makes part of a larger project <a target="_blank" href="https://www.printables.com/model/530478-tools-and-accessories-box-for-bambu-printers" rel="nofollow noopener">Tools and Accessories for Bambu Printers</a>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Small scraper Tool - Bambulab edition

Impresora

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>

Wireless Mouse 002

Gadgets

JamesThePrinter

Desk organizer wrapped in rope. Two versions are available - with and without a divider. They can be used to organize whatever you'd like (desk supplies, printer tools, etc.)! In contrast to many of my other Rope Series models, I have added a smooth inner wall to speed up print time.All of my rope models can be found in collections on <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">MakerWorld</a> and <a target="_blank" href="https://www.printables.com/@JamesThePrinter/collections/326850" rel="nofollow noopener">Printables</a>. <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filament used in the pictures above: <ul><li>Prusament Lipstick Red PLA</li></ul>

Rope Desk Organizer

Almacenamiento / Organizador

Nils Kal

Halloween Spider Web Coasters - two different styles&nbsp;&nbsp;Happy printing!NK

Halloween Spider Web Coasters

2D y Llaveros

agepbiz

"making of.." <figure class="media"><div data-oembed-url="https://youtu.be/1gzcMpzTbfI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/1gzcMpzTbfI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I wanted to make some halloween decoration using flexible filament so I made this little fella in a speed 3d modeling session. I hope you enjoy this small project&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/agepbiz" rel="nofollow noopener">https://www.youtube.com/agepbiz</a>&nbsp;<h3>Print instructions</h3>Unassociated tags: black widow, halloween decoration<h3>Category: Toys & Games Print Settings</h3>Printer: Mingda D2Rafts: NoSupports: NoResolution: 0.1mmInfill: 20<h3>Filament: Fillamentum TPU 92A Traffic Black Post-Printing</h3>

Black Widow TPU Spider

Figuras

A selection of Halloween ghosts that use LED tea lights to glow.Short Models (100mm Tall)<ul><li>Scary Ghost</li><li>Spooky Ghost</li><li>Happy Ghost</li><li>Blank Ghost - Design your own face! (.f3d and .stl included)</li></ul>Large Models (150mm Tall)<ul><li>Scary Ghost</li><li>Spooky Ghost</li><li>Blank Ghost - Design your own face! (.f3d and .stl included)</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/70395/2023-09-12_nh65u2uq6cpe.gif"></figure>Most tea lights have a 38mm (1.5in) diameter. The openings in these models are slightly oversized, so most (if not all) tea lights will fit. Just turn on the LED and set your ghost on top. If you are worried about getting lights that fit, <a target="_blank" href="https://amzn.to/3YQGEA9" rel="nofollow noopener">these</a> are the tea lights that I used.&nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print SettingsThese have all been designed to print with 2 perimeters and require no infill. Some overhangs in the mouth and eyes require good cooling.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Sunlu PLA White</li></ul>

Glowing Ghosts!

Decoracion

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

Contenedor

mcgybeer

Cute Mini Octopus, the original!It's designed so it can be printed at once. No assembly or supports required.Spare tentacle available as well, no need to discard failed prints!

Cute Mini Octopus

Flexi

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;