cherubino777

Sakul

&nbsp;Brighten up your office breaks with this fun mini table foosball game.A fully functional table soccer set to challenge your colleagues. All you need, aside from the printed parts, are 20 M3x10 and 12 M3x20 screws, and some CA Glue. For assembly, print out all the parts, and start by gluing the playfield into the base. Screw the legs and the ball catchers to the base; you can screw them directly into the plastic, as it will be plenty strong. <figure class="image image_resized" style="width: 61.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_6c8651f7c1e8.jpg"></figure> Glue the side caps into the base, slide the rods in from the side, and also stick the figurines on the rods. The figurines will be fixed in place using the M3x10 screws. All the TPU parts can now be attached using CA Glue. Glue the handles and end caps on the rods, also attach the TPU feet to the legs. The ball is made by gluing the two halves together.<figure class="image image_resized" style="width: 34.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_3727bab3bdd4.jpg"></figure>Lastly, slide the goal indicator over the display shield and then attach it to the base. Have fun playing!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>  Check out my newest Uploads: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-06-04_09fc049f7c6e.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-05-01_6d8b75eefb4a4.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Office Mini Desk Foosball Table

Da stampare

BRADCAD

Converts 73.5mm (~3in) spools to 55mm (~2in) spools to work with the AMS Lite. Designed for fitting Sunlu spools that always slip off the AMS Lite system. You do not need to print support with this model. Feel free to remix for other spools! Print at 15% infill. PLA will work great! When assembling, you will need to bend the part inward. It will act as a spring to grip the spool. A tight fit is needed so it does not fall off the AMS lite. To take it out of your spool, push with 2 thumbs on the opposite side, and it should pop right out. NOTE: Some rolls have draft (a slight taper) on the inside diameter walls. If the adapter does not fit well, try inserting on the other side of the roll.

Da stampare

Stampati