Cerwas

deltastudios3d

I was looking for a rugged case that could clip together, meaning you could carry more than one at a time.after much prototyping i finally came up with a design i was happy with!&nbsp;This is the second box in a series which will enable you to store everything in a compatible system where everything works together!Two of these small boxes fit either above or below the medium container.&nbsp;the smaller insert from this container can fit twice inside the medium box if desired, however to stop them sliding around you would also need to add the small spacer insert.&nbsp;Prints nearly fully without supports, the only parts that need supporting are the clips for interlocking the cases, you could try printing without and laying them flat on the bed but the clip tends to delaminate when connected together.&nbsp;all screws self thread into the model so care needs to be taken when tightening them to ensure they do not strip out.&nbsp;to assemble the case you will need:2 x M3 x16 machine screws2 x M3 x20 machine screws4 x M3 x 10 machine screws&nbsp;Assembly instructions:&nbsp;using four M3 x 10 screws attach the two side clips into the recesses of the lid on either side, ensure the clips are facing flat side up with the holes towards the edges of the case.&nbsp;Attach the two clasps to the front of the case using M3 x 20 screws, these should be inserted with the heads of the screws facing towards the edges of the case.&nbsp;Connect the hinges using two M3 x 16 screws once again these should be installed with the screw heads facing the edges of the case.&nbsp;Finally press fit the gasket into the groove on the lid of the case, this should be a tight fit and might need pressing in with a flat tool ensuring the flat side of the gasket enters the groove first.

Small Rugged Box - Compatible with other boxes

Containers

ChainsawGraphics

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Blue Gray Transmission Distance: 1.5 PLA Polyterra SapphireBlue Transmission Distance: 0.2 PLA BambuLab Desert Tan Transmission Distance: 0.4 PLA BambuLab Matte White Transmission Distance: 3.5 This print uses 5 unique filamentsSwap Instructions: Start with Charcoal Black At layer #11 (0.56mm) swap to Blue Gray At layer #31 (1.36mm) swap to SapphireBlue At layer #47 (2mm) swap to Desert Tan At layer #50 (2.12mm) swap to White for the rest.

Fallout Vault Poster - Hueforge 5 color

Fallout

Müco Y.

<h3>Don't lose your page in the dark with this desk lamp bookmark.</h3>This unique bookmark is inspired by the elegant lines and shapes of designer desk lamps. It combines functionality with aesthetic flair and will be the perfect companion for bookworms and book lovers.&nbsp;<h3>Why choose this bookmark?</h3>- It combines practicality with a touch of design aesthetics.- Perfect for bookworms who want to express their love of literature in style.- A great gift for bibliophiles and people who appreciate desk lamps.<img src="https://fonts.gstatic.com/s/e/notoemoji/15.0/1f60b/32.png"> Whether on the bedside table, on the bookshelf or as a companion when travelling - this bookmark in desk lamp design is sure to attract everyone's attention! <img src="https://fonts.gstatic.com/s/e/notoemoji/15.0/1f4da/32.png"><img src="https://fonts.gstatic.com/s/e/notoemoji/15.0/1f4a1/32.png"> Material: I printed it in PETG as it is my favourite material but you are welcome to try other and share with us. Shape: The characteristic silhouette of a desk lamp, with a slender lamp arm and a stylish lampshade. The light cone serves as a holder and side divider. Colours: printed in classic black and white. But anything is possible.The most realistic way is to print the light cone in transparent white or yellow.There are no limits to your imagination. Feel free to share your prints in the comments.&nbsp;I would love to see your versions.<h3>Assembly:</h3>1. remove all supports cleanly from the lamp2. clean the slot for the light cone3. insert the light cone so that it snaps in cleanly4. finished!&nbsp;&nbsp;P.S. Gluing is not necessary but possible. Just put a few drops in the slot and possibly on the base.&nbsp;<h3>Printing:</h3>&nbsp;The lamp must be printed with supports. I recommend the tree supports. To get the best result print as fine and slow as possible. &nbsp;I printed mine with a layer height of 0.16mm.&nbsp;There is not much to consider for the light cone. Let it cool down long enough before removing it from the printing plate to avoid warping.I orientated the model so that the print lines go in the direction of the light beam, it looks better in detail.

Desk lamp Bookmark

Bookmarks

Emashi

One of my Meta Quest 3 controllers stand. Pretty useful, as you can place them in this stand, not laying down on the desk. Also its a nice looking display for them.&nbsp;No supports needed for it.