IceFondue

guns

wuguigui

Updated 20240520Someone asked for the extra height of the lamp, so I added a part called&#34;Icosahedron-Pole Extra height&#34;, you can choose to add 1, 2, or 3… of these parts, but be careful of the strength and the center of gravity. The print profile was added as well.__________________________________________________________________________________________________________________________&nbsp;Updated 20240407After using the lamp for some time, I found the Pole parts started to incline, the bottom of the pole was too weak to hold the weight of the lamp, so I modified the shape of the pole&#39;s bottom&amp;leg parts as the image shows, shorten the hanger part, now this issue should be fixed.The parts&#34; Icosahedron-Hanger&#34;, &#34;Icosahedron-Pole Bottom&#34;, &#34;Icosahedron-Pole Leg01&#34;, and &#34;Icosahedron-Pole Leg02&#34;  were replaced in this upgrade, and these parts in the print profiles were replaced as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-04-07_57daeaf83d776.png"></figure>__________________________________________________________________________________________________________________________&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is an Icosahedron lamp designed for <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">Bambu Lab LED Lamp Kit 001</a> , I designed a pole hanger to hold it, so you can put it beside your computer or bedside as a night lamp.It can be built in 3 types, you can also try to make a different lamp for yourself.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>Recommended filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambu PLA Tough</a>, <a target="_blank" href="https://shrsl.com/4duvh" rel="nofollow noopener">Bambu PLA-CF</a>, or other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>The models can be separated in Bambu Studio, so you can make the shell and the back side in 2 colors. Because the white shell version is easy to leak the back color, so I made different parts for the white shell. You can download the parts name with &#34;White shell&#34;, If you want to print a white shell lamp. All parts can be printed without supports, the pole parts need a raft to make them stable on the board.这是一盏可使用拓竹LED模组的正二十面体吊灯，可自由组合拼接，正反面双色打印。白色款由于容易透出背部的颜色，专门做了与黑色款不同的模型，请选择文件名带有”White Shell&#34;的模型打印。所有部件可无支撑打印，灯杆打印时底部需加至少两层衬垫（Raft)，建议模型与衬垫距离设为0，以保证稳固，打印后切除底部残余衬垫即可。安装说明见以下图片，其他详情见<a target="_blank" href="https://www.bilibili.com/video/BV1rC4y167s8/?spm_id_from=333.999.0.0&amp;vd_source=ddcaa334bf40e5b233718d3c3f743c02" rel="nofollow noopener">B站视频</a>Watch the video to get more information.&nbsp;Assembly instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_369dcb1e0eea4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_6bca9810c5931.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a6097df6bc009.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a2772edf695be.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_668d16c5e68ff.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_031c1a8499649.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_2e88e08ac77a4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_05fe0c50d5c13.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_b175560990aa4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_c82d75e94cf9f.jpg"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!If you want to sell the printed model, you need a Commercial license at: <a target="_blank" href="https://www.patreon.com/wuguigui/membership" rel="nofollow noopener">https://www.patreon.com/wuguigui/membership</a>&nbsp;

Icosahedron Lamp for LED Lamp Kit 001

lamp

blecheimer

This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane. <a target="_blank" href="https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75" rel="nofollow noopener">https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75</a> The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without using glue. All necessary clips and bolts are printed. I even included a small screwdriver.&nbsp;Use the following settings for the wings: 0,12 layer height, 4 walls, 4 bottoms, 8 tops, 16% gyroid infill The rest can be printed with 0,2 layers, 4 walls, 4 bottoms, 5 tops, 6% gyroid infill. I recommend a brim only for the bolts. See my 3mf for more details and how I positioned the parts on the build plates.&nbsp;Print the following parts with support:<ul><li>Fuselage (only for the cockpit)</li><li>Wings (only for th bottom of the threads)</li><li>Engine (not for the thread)</li><li>Bolts (only for the head)</li><li>Struts (use small tree support)</li><li>Supports (use small tree support)</li><li>Cockpit (only for the bottom of the thread)</li></ul>Do not use support on the threads.&nbsp;All parts will fit into a 200x200x200 build space.  A1 mini users need to split the wings into two parts (can be done with Bambu Studio) and glue them together after printing.&nbsp;For assembly follow these steps:<ul><li>put the front cover on the engine</li><li>screw the engine to the fuselage</li><li>insert the cockpit into the fuselage and secure it with a short bolt</li><li>insert the lower wing into the fuselage and secure it with a short bolt</li><li>insert the rear wing into the fuselage and secure it with a short bolt</li><li>this is now a bit tricky: insert the middle supports into the fuselage and put the top wing on the supports</li><li>now put one strut between the lower and top wing</li><li>insert a long bolt through the lower wing into the strut and screw it to the top wing</li><li>repeat for the other side</li><li>clip the propeller and the wheels with the pins to the plane</li><li>make funny engine noises and play with your new plane  </li></ul>Update 2023-12-11:Thanks to sgioja and CatWhisker I was able to correct two design flaws (cockpit + wings) and re-oriented the wing support in the print profile. The STLs and the print profile have been updated accordingly.&nbsp;Update 2024-02-17: User doppelt-05 made a very creative add-on to this model. He added a pinwheel propeller so that the propeller spins when the wind is blowing. You can find his model here on makerworld: <a href="https://makerworld.com/en/models/190364#profileId-210130" rel="nofollow"> https://makerworld.com/en/models/190364#profileId-210130</a>&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="https://creativecommons.org/licenses/by-nc-nd/4.0/" rel="nofollow noopener">CC-BY-NC-ND 4.0</a>. You are not allowed to copy this model to other 3D printing websites without my permission.

guns

lamp

djsj