celoranta

V3 Precision

This magnetic adapter is for the Bambu Lab X1 or P1 Series printer. &nbsp;The adapter allows you to attach a vent hose and pipe the fumes out of the room or the immediate area. I print with ASA and an air duct system does a great job of moving all the fumes outside.&nbsp;This adapter fits a 3" air duct hose. This adapter also uses four (4) magnets (0.5 inch diameter, .010 thick). The mounting holes for the magnets are oversized (0.51 diameter) for an easy fit. Depending on you printing tolerance, you might need to super glue the magnets in place.&nbsp;The magnets hold the vent adapter in place, but will slide around if moving the printer. Once your printer is in place, the vent will stay in place.&nbsp;Filament - I used PLA+ or PLA Carbon FiberSupport - NoneBrim - 5 to 8mmLayer - 0.2mm3mf file using Bambu Lab Studio (slicer)&nbsp;You can find digital files for T-adapters and Y-adapters to use for your air duct system on our website www.v3precision.com.You can also find a finished adapter with the magnets installed.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/g5IgqP4JOGM?si=ETr3maOqUtbBM78v"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/g5IgqP4JOGM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Bambu Lab X1 Rear Vent Adapter

Printer

Eric

Filament spool storage container, with tabs for feet removed to make the holders smaller to preserve space when using on spool shelving.&nbsp;You will need 8 M3x40mm screws for the hinges and clasps.&nbsp;Update: I have made a print profile of the gasket with an extended top portion, allowing for a tighter seal of the lid and base. It is extremely tight to close the latches if you print this version of the gasket, so it may provide a better seal.

Filament Spool Storage Box Tabs Removed

Storage

Freer

👍👍Please 🚀Boost this model if you like it, it really helps!👍👍&nbsp;Great for testing or even as a prank.Compatible with all Bambu printers. Smallest possible size Bambu Slicer allows.Worlds Fastest and Smallest 3d print.&nbsp;!! See Max Build Volume for the slowest 3d print here: <a target="_blank" href="https://makerworld.com/en/models/250725" rel="nofollow noopener">https://makerworld.com/en/models/250725</a>

Worlds Smallest 3d Print - Fastest Bambu Print!

Utility

Fyrby Additive

V-Spooler

Tools

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

The Smoothy - Y Splitter Connector

Printed

Clayton Merkle

-------------------- UPDATE 1/30/2024 --------------------I updated the sponge holder base to have a 4 degree angle on the top surface to help water runoff more easily and to prevent water from pooling up in the sponge holder. Based on feedback, I also slightly reduced the size of the plate so that it fits in the base a little more easily. It's still a nice snug fit, but a little easier to assemble now. These new models have the “_v2” suffix.___________________________________________________Simple kitchen sponge holder that drains into the sink. I printed both parts in PLA and they have held up well for over a year now, however PETg may be easier to clean, and is considered more “food safe.”Note that the image is of the original design. I have since beefed up the sponge holder plate to prevent it from warping over time.

Kitchen Sponge Holder

Household

mcgybeer