Simple yet perfect. Very happy with this. Made with bambu lab petg-hf

Went with the longer version, costco toilet paper. Worked great for my use case. I only printed one and the rest stack. Printed with a 0.6mm nozzle, bambu lab petg-hf.

I had a single random chisel and to my surprise this fit like a glove. I literally rolled the dice with this print. Made with bambu lab petg-hf

Fits my ridge impact and regular drill. Quick, easy and strong design. Really like it. Thank you! Made with bambu lab petg-hf black.

Tried a few different models in the past and I think i like these the best. A little large, but prints well so i opted not to resize them and just haft fill. I live in a very humid climate. All my filament is freezer bagged, contains one of these with fresh silica. 100% would recommend if you live near or on the coast. Printed in bambu lab petg-hf (durability) with a 0.6mm nozzle (speed)

When you find a random hook on makers worlds that just works lol Actually i had to reprint because my first print split, the screw holes were a bit too small. Second print i made sure to drill the holes before screwing them down. Printed at 0.24mm on X1C, Bambulab pla purple

Printed at 50% instead of 66%, at a 0.12mm layer hight. Crisp threads

Use them daily, big part of my routine. Thanks! Printed 0.4mm, 0.12mm layer, bambulab pla purple

This is great! Not only does it do exactly what it suppose to, i also discovered all the crap that was stuck in in there. You saved my frame and panel from a ton of rust. Cant thank you enough! Printed in bambu lab petg-hf, will try for a year and possibly reprint in ABS but i think PETG is good enough.

Tried a few different models, this one seems to be the best. The screw in the bottom really helps keep things in place. Printed in bambu labs ABS.

Printed in Bambu Lab PETG-HF, used Bambu Labs PLA as a support interface layer. So far its not worked as expected, my poop shoot keeps clogging up as the filament string catches and doesnt fall. Ill keep using it, planing to remove and sand it down a but to see if that helps. Hopefully this feedback helps the dev, I did stick to his print profile with the tiny layer height. I might reprint with my own settings to see if that helps. I think things are a little too sharp

Printed in Bambu lab PLA, made for the echo dot gen 5. Very happy. Looks great, fast print.

Printed in bambu lab petg, actually came out sharp and strong. Worked good.

Printed 2 in bambu labs ABS, works great. ABS or better is a must.

Printed in bambu lab ABS-GF black. Really nice, solid design. Can put a decent amount of weight on them. I made a couple. Super happy. A little big, make sure you scale it to suite your needs.

Printed in Bambulab PETG-HF, worked perfect. Printed the canadian version but im sure all the models are good!

Awesome!, i opted to have smooth on the bottom and ridges on the side. Love it! Printed in Bambu ABS-gf

Love these! the smooth version is the best for underneath, fantastic! Printed in bambu lab abs-gf.