cashcwells19

filament cutter

universal clipbags,wire,hairetc.

Chamomile_3D

<h2>Y Splitter made for Bambulab X1C</h2><h3> Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well.</h3><h2> If you have problems, you could reprint the splitter slightly smaller, say at 98% or so.</h2>&nbsp;<ul><li>Follow the filament's natural path for both AMS and external spool. The filament path in all available Y-Splitter designs is optimal only for the AMS. For the external spool, however, the splitter usually turns in an up direction, which can cause the filament to get snag when inserting it.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/440754/2024-01-22_3d5661cc555a5.webp">&nbsp;I have been using this Y-Splitter for over a week and can confirm it works beautifully. The AMS colour changes work effortlessly, and I am able to start a print with the external spool in a matter of seconds. Print Settings I highly recommend printing from the official profile included above to ensure this performs correctly. If you want to slice it yourself though, here's the core settings:<ul><li>Layer Height: 0.2mm</li><li>Wall Loops: 2</li><li>Material: PLA</li></ul> Thanks for downloading and happy printing!

Smooth Y - Splitter v5

filament Y splitter

HackMan

Slim remote holder for wall mount

remote holders 

Lexx_3D

This is the “Under Table Drawer” designed by me. Please note that the Dimensions are the inner ones of the drawer.&nbsp;Note: The Holder is slightly bigger than the drawer!&nbsp;You can mount it under your desk with doublesided Tape. I also added holes for small magnets (d: 6mm; h: 2.6mm) to make the drawer lock into place.&nbsp;Please feel free to contact me for other Dimensions!&nbsp;Standard Inner Dimensions Drawer:<ul><li>Length: 110mm || 155mm</li><li>Width: 140mm || 220mm</li><li>Height: 30mm || 55mm</li><li>wallthikness: 1.2mm || 1.2mm</li></ul>Standard Dimensions Holder:<ul><li>Length: 162.8mm || 207.8mm</li><li>Width: 157.6mm || 237.6mm</li><li>Height: 7.2mm || 7.2mm</li></ul>Settings:<ul><li>layer height: 0.2mm</li><li>line width: 0.42mm</li><li>wall loops: 1-3</li><li>supports:<ul><li>Drawer: yes</li><li>Holder: no</li></ul></li></ul>Assembly:Be careful not to squeeze the holder together when sticking it to the table, otherwise the drawer will no longer slide in smoothly.&nbsp;Update:<ul><li>2024/03/20: added new Version: 127x220x55mm</li><li>2024/02/06: I added new Versions without the bottom roundings because they did not print that well at larger models.</li><li>2024/02/06: I have to apologize to all who downloaded the old 200x220x55 Version, because it is actually 155x220x55. I changed the name to “155x220x55”</li><li>2024/01/31: added new Version: 155x220x55mm</li></ul>&nbsp;Feel free to upload your Makes!

Under Table Drawer

underdesk drawers

IanCantDraw

Another wedge to lift the top glass of your Bambu printer when you need to vent for long prints.This one firmly holds the glass top in place, is quick/easy to put on and take off, and doesn&#39;t require assembly or supports.&nbsp;Lots of detail below, but the summary is that this clips onto the glass, then slides over around the handle, creating a firm grip that holds the glass up ~20mm (~¾&#34;), creating a vent.&nbsp;It can clip onto the door handle when not in use (an accidental perk - thank you to the reviewers who discovered this!).&nbsp;&nbsp;Updated 2024-03-6 - The model has been updated and split into Tight Fit and Loose Fit versions.- Tight Fit is very close to the same as the original design. This fits snugly around the glass and the handle.- Loose Fit has larger tolerances around the glass and the handle.Both versions were adjusted to avoid getting stuck on the screws on the bottom of the handle.&nbsp;There are 2 new profiles, accordingly named Tight Fit and Loose Fit.Each new profile has 4 different designs inside, 1 per plate. The designs are simply visual differences and are up to your preference. Just pick your favorite design and print that single plate.Because multiple choices are bundled together, the filament usage and time estimates are wrong. The actual time and usage are about ¼ of those listed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000158585/design/2024-03-06_cd743bb241775.png"></figure>&nbsp;I&#39;ll keep the old profiles with the old models, but will label them as old.&nbsp;&nbsp;&nbsp;How To&nbsp;- Lift the glass up- Clip the lifter on to the front of the glass to the right of the handle- Push it all the way forward- Slide it left until it stops against the handle (it&#39;s an intentionally snug fit)- Lower the glass back down <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000158585/design/2024-02-09_37e684647c281.png">&nbsp;&nbsp;“Locked” in place:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000158585/design/2024-03-06_f71dc534706c1.png">&nbsp;Recommended Print Settings&nbsp;- Layer height: 0.20mm Standard- Wall loops: 3- Infill: 15%, Cubic&nbsp;If printed standing on its right side, it shouldn&#39;t need supports or a brim (see pictures). The model should already be in this orientation when opening it.This printed well and feels very sturdy in both Bambu PLA Basic and Sunlu PLA.&nbsp;&nbsp;&nbsp;I&#39;m open to feedback. Feel free to remix, but not sell.&nbsp;&nbsp;&nbsp;Update History&nbsp;2024 -03-06:<ul><li>Adjusted width of the “screw channel” on the bottom lip to prevent the glass handle&#39;s screws from being in the way</li><li>Added Tight Fit and Loose Fit options for those running into issues with the fit being too tight</li><li>Changed numbers &amp; arrows on top to engraved instead of embossed</li><li>Reworked and cleaned up the original CAD design</li><li>Minor visual changes</li></ul>&nbsp;2024-02-11:<ul><li>Added a version that includes a grip and uploaded 2 profiles for it (center hole and solid).</li><li>Made a minor change to the existing models to smooth out a sharp corner (no functional changes), and updated profiles.</li><li>Updated photos and description.</li></ul>2024-02-03:<ul><li>Description &amp; picture revisions.</li><li>No model changes.</li></ul>2024-01-28:<ul><li>Replaced the STLs with higher quality exports from the CAD software and updated the print profiles with them.</li><li>There&#39;s no change to the design or functional geometry, but the curves look cleaner now.</li></ul>2024-01-27:<ul><li>Initial upload.</li></ul>

Sturdy Glass Lifter for X1/P1

lid lifter wedge

SWElite

Note: The profile contains solid and honeycomb tiles. Use whichever you need for your project.&nbsp;How can you exceed the limits of your build plate? One way is creating interlocking tiles that cannot be taken apart in normal use!You can build any rectangular or square configuration, as large as you want, with these tiles.Do you need 10x10 ft or 10x10 m? What about 1 square kilometer? You can do that - just print enough tiles. :)&nbsp;Assembly Instructions:<figure class="media"><div data-oembed-url="https://youtu.be/mr8IFzL-DG4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/mr8IFzL-DG4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Do your own testing:The secret is the special geometry of the zipper joint.If you want to do your own experiment with different filaments or layer thickness, feel free to download the <a target="_blank" href="https://makerworld.com/en/models/160732#profileId-176413" rel="nofollow noopener">R&D files</a> containing different draft angles for the zipper joint. Find the minimal draft angle that would hold the tiles together in all three directions for your specific use cases.<a target="_blank" href="https://makerworld.com/en/models/160732#profileId-176413" rel="nofollow noopener">https://makerworld.com/en/models/160732#profileId-176413</a>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/-mJRpvnguQ0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-mJRpvnguQ0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Plate 1:Contains the Solid tile. Print as many as you need.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/480065/2024-01-28_9746775657001.png"></figure>Plate 2:Contains the Female Ends. Print as many as you need.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/480065/2024-01-28_3ee527297e726.png"></figure>&nbsp;Plate 3:Contains the Male Ends. Print as many as you need.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/480065/2024-01-28_d0bdcd256c12.png"></figure>&nbsp;Plate 4:Contains the Mixed Ends. Print as many as you need.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/480065/2024-01-28_aa6be42779216.png"></figure>Plate 5:Contains the Honeycomb tile (in case you want to save filament). Print as many as you need.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/480065/2024-01-28_54836e4f8a4e.png"></figure>Completely unrelated: The Vertical Decor Collection:<ul><li>Slender Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91147#profileId-97491" rel="nofollow noopener">https://makerworld.com/en/models/91147#profileId-97491</a></li><li>Fat Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91133#profileId-97479" rel="nofollow noopener">https://makerworld.com/en/models/91133#profileId-97479</a></li><li>Candleholder Tall: <a target="_blank" href="https://makerworld.com/en/models/91168#profileId-97509" rel="nofollow noopener">https://makerworld.com/en/models/91168#profileId-97509</a></li><li>Candleholder Short: <a target="_blank" href="https://makerworld.com/en/models/91158#profileId-97497" rel="nofollow noopener">https://makerworld.com/en/models/91158#profileId-97497</a></li><li>Candleholder Double: <a target="_blank" href="https://makerworld.com/en/models/91181#profileId-97517" rel="nofollow noopener">https://makerworld.com/en/models/91181#profileId-97517</a></li><li>Tissue Box Holder with Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73097#profileId-77641" rel="nofollow noopener">https://makerworld.com/en/models/73097#profileId-77641</a></li><li>Tissue Box Holder without Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73057#profileId-77633" rel="nofollow noopener">https://makerworld.com/en/models/73057#profileId-77633</a></li><li>Tissue Box Holder without Bottom Lid (Kirkland): <a target="_blank" href="https://makerworld.com/en/models/67057#profileId-70913" rel="nofollow noopener">https://makerworld.com/en/models/67057#profileId-70913</a></li><li>Weightless Spheres: <a target="_blank" href="https://makerworld.com/en/models/99069#profileId-105629" rel="nofollow noopener">https://makerworld.com/en/models/99069#profileId-105629</a></li><li>Weightless Teardrop Vase: <a target="_blank" href="https://makerworld.com/en/models/106259#profileId-113422" rel="nofollow noopener">https://makerworld.com/en/models/106259#profileId-113422</a></li><li>Downhill Skier Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/106214#profileId-113390" rel="nofollow noopener">https://makerworld.com/en/models/106214#profileId-113390</a></li><li>Tail-grabbing Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/126631#profileId-136909" rel="nofollow noopener">https://makerworld.com/en/models/126631#profileId-136909</a></li><li>Climber Door Frame: <a target="_blank" href="https://makerworld.com/en/models/138127#profileId-150395" rel="nofollow noopener">https://makerworld.com/en/models/138127#profileId-150395</a></li></ul>Also:<ul><li>Ringosaurus bigger and deeper: <a target="_blank" href="https://makerworld.com/en/models/57828#profileId-59525" rel="nofollow noopener">https://makerworld.com/en/models/57828#profileId-59525</a></li><li>Unlocked Level Cake Topper: <a target="_blank" href="https://makerworld.com/en/models/104796#profileId-111855" rel="nofollow noopener">https://makerworld.com/en/models/104796#profileId-111855</a></li><li>Biggest Gift Box: <a target="_blank" href="https://makerworld.com/en/models/84040#profileId-89836" rel="nofollow noopener">https://makerworld.com/en/models/84040#profileId-89836</a></li><li>Large Copter Propeller: <a target="_blank" href="https://makerworld.com/en/models/64664#profileId-67877" rel="nofollow noopener">https://makerworld.com/en/models/64664#profileId-67877</a></li></ul>

Infinity Interlocking Tiles System

infinity plates

Stag 3D

<h2>Stag Filament Clip</h2>“Probably the best filament clip in the world…”&nbsp;Simply click the filament clip into place on either side of the spool and feed your filament into the hole for a nice secure fit. &nbsp;It may require you to push harder when first inserting the filament but that's perfectly normal and ensures a nice clean fit. I also recommend the use of a glue stick on your print plate to ensure the best quality print and adhesion. <h4>Featuring:</h4><ul><li>Designed for Bambu Labs Spools</li><li>No supports</li><li>No brims</li><li>Quick print</li></ul>

THE Filament Clip

filament clips 

Artifex Design

Holds the quick change discs that dremel sells. Other items were bought from Amazon.

Rotary Bit Holder / Dremel

dremel supplys

Ross3D

This is a medium-sized stationery / tool holder with the design of Bambu Lab's P1S tool head.I took some liberties in slightly flattening the toolhead to maximize the available space for storing stationery or tools.&nbsp;Included in the model files are complete unit, as well as split unit for those who want to reduce waste. They can be attached with superglue.&nbsp;Update 03 Feb 2024:I've also made the A1 Toolhead variant: https://makerworld.com/en/models/169124

Bambu Lab Toolhead Stationery Holder / Pen Holder / Pencil Holder / Tool Holder

pen holder

AstraCD

**** Check new model - <a target="_blank" href="https://makerworld.com/en/models/183750#profileId-202603" rel="nofollow noopener">https://makerworld.com/en/models/183750#profileId-202603</a> **** I couldn't find anything that works with https://makerworld.com/en/models/63021#profileId-65721so I designed this.&nbsp;Please note: It is not made too tight, as first versions I was testing would pop out the front cover on hard stops or fast changes of direction.

Head Dust Cover for P and X series

dust cover pieces 

Catherine Doucet

<h3>All 4 Bambu Labs X1C, P1P, P1S and A1 plates are now available to print as mouse pads!!</h3><h4>Features :</h4><ul><li>75% scale Bambu Labs Plates</li><li>Total Height : 2mm</li><li>When printed on a textured plate, the texture allows the mouse to glide effortlessly</li><li>Optional : add sticky dots to the bottom of the plate to make it more stable on your desk</li></ul><h4>Disclaimer :</h4><ul><li>Smaller details have been left out to maximize the chances of a succesful print.</li><li>If you wish to not have the Bambu Logo in white, just ‘’paint'' it black in the slicer</li></ul>&nbsp;<h3>Find the Bambu Lab A1 Mini Buildplate Mouse Pad <a target="_blank" href="https://makerworld.com/en/models/171931#profileId-188900" rel="nofollow noopener">HERE</a></h3><h3>See my latest design, the <a target="_blank" href="https://makerworld.com/en/models/185340#profileId-204054" rel="nofollow noopener">Bambu Printers Pen Cup</a></h3><img src="https://makerworld.bblmw.com/makerworld/draft/533099/2024-02-13_638a1ea2c1019.png">     <img src="https://makerworld.bblmw.com/makerworld/draft/533099/2024-02-13_a551125cd90dd.png">

Bambu Lab A1, X & P Series Buildplate Mouse Pad

mouse pad

PrintedByJohn

Keep your small parts in one spot. quick print!!!

tray for spare parts and stuff

small parts tray 

3dprint.pjw

<h2>Glock Coasters with Container</h2>&nbsp;&nbsp;<ul><li>Easy/Fast Print - </li><li>4 coaster 1 plate. Duplicate and orientation free</li><li>Full Set 4 or 6 coaster with holder</li></ul>&nbsp;&nbsp;&nbsp;Have fun with it, if you like it. Like and follow thanks &nbsp;&nbsp;&nbsp;&nbsp;<blockquote>Das Logo ist markenrechtlich geschützt !Die Rechte gehören dem Eigentümer nach dem Markenrecht !The logo is protected by trademark law!The rights belong to the owner according to trademark law!</blockquote>

Glock Coaster 

Glock coasters

LemonArts

Bambu Build plate holder in Glock 17 design. For 9 Plates.X1C, P1S, P1P, A1, A1 Mini. <figure class="image image_resized" style="width:46.23%;"><img src="https://makerworld.bblmw.com/makerworld/draft/492433/2024-02-04_5000f6ba9665b.jpg"></figure><figure class="image image_resized" style="width:45.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/492433/2024-02-04_ec6c4971d178b.jpg"></figure><figure class="image image_resized" style="width:45.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/492433/2024-02-04_d3aa2ed71798e.jpg"></figure>

Glock 17 Bambu Build Plate Holder

plate holder

fritzproject

Just a little Skdis like panel for our 3d printer, suitable for much uses.no support needed, just 9 magnets 6x3mm <a target="_blank" href="https://amzn.to/3veplyr" rel="nofollow noopener">https://amzn.to/3veplyr</a>&nbsp;un semplice pannello tipo skdis per le nostre stampanti, servono solo 9 magneti 6x3mm aquistabili qui https://amzn.to/3veplyr

Skdis like lateral panel for P1(S/P) and X1C with 6x3mm magnet (9x)

skids panel

Staprin3D

Here is my construction of a very stable wall mount for the Bambu AMS with integrated plates holder&nbsp;The wall mount work with the new AMS (end of 2023 model: SA001) see position of the wall mount at the back of the AMS on the photo.I cannot say whether the holder also works with the older AMS, I would be happy to receive feedback on this.&nbsp;The holders are symmetrical and can be printed together on one plate. Support is only necessary in the area of the AMS holder. See plate arrangement&nbsp;The construction is designed so that variable cross struts can be inserted between the beams, the length of which can also be printed on a 250 mm build plate. The building board holder then sits on these cross strutsThe cross struts are secured with small clips after insertion.I printed the parts with layer 0.16 and &#34;PLA tough&#34; with great results in terms of strength and appearance.&nbsp;See also my additional small shelf system for storing spare parts.and the additional drawer system on the side for storage of hotends&nbsp; <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152451/design/2024-01-23_61c74bbd8a0b4.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152451/design/2024-03-04_eabc4cc84f2f58.png">

AMS Wall mount with integrated build plate holder

AMS & PLATE HOLDER WALL MOUNT

DarkSword Creations

A complete set for make HolesPlate 1: The Anti-dust it helps make hole in walls without make a mess with dustput a plastic bag inside the final part and make a node around the lateral tipsPlate2: it helps to sign holes &nbsp;Enjoy

Drill Companion (Drill, Hole, anti-dust helper)

drill mess collector

Black Glovz

Just hit print and peel off at the finish. Your bed will be clean

Bed Cleaner Model X1C / P1P / P1S

bed cleaner

TheMzunguPrints

This was a remix of the circle game model found on printables linked here: <a target="_blank" href="https://www.printables.com/model/639243-circle-game-gravity-knife" rel="nofollow noopener">Circle game gravity knife by Daniel Josvai | Download free STL model | Printables.com</a> All original rights go to that post, the remix I did was to make the hand an 8-bit middle finger

8-bit Gravity Knife Middle Finger

trinkets

thingaverse

Thyristor

Simple and easy Desk Stand for the Panda Touch.The stand tilts the screen at a 45-degree angle, ensuring comfortable viewing, and is designed for easy assembly with the use of the original screws.&nbsp;Underneath, there are recessed areas for inserting four 13x13mm rubber feet, ensuring stability. <a target="_blank" href="https://makerworld.com/en/models/189784" rel="nofollow noopener">Here you can find printable TPU feet by Fussel</a>.&nbsp;With Type A, the cable can be neatly tucked into the holder, whereas Type B provides the option to secure the cable with a cable tie.

Panda Touch Desk Stand

screen stuff

HastCustom3dPrints

This is a left hand wall mount for an AR15.

AR15 Wall Mount LEFT

gun stuff

BODY MECHANIC

pill box

containers

undi23

Funny PEW PEW MADAFAKAS CoasterThe coaster has an diameter of 100 mm and a height of 2 mm. It is printed image side down for a better surface finish.&nbsp;If you have any requests for changes or ideas, just let me know.&nbsp;Attention!!! I noticed in the other print profiles that weren't mine, that the print order is set incorrectly. It needs to be printed in black first, otherwise it won't print the eyes properly. Please keep this in mind before printing the coaster.&nbsp;Checkout the PEW PEW MADAFAKAS Lightbox here on Makerworld!!!<a target="_blank" href="https://makerworld.com/en/models/220210#profileId-238762" rel="nofollow noopener">Pew Pew Madafakas Lightbox by undi23 - MakerWorld</a><img src="https://makerworld.bblmw.com/makerworld/draft/622631/2024-03-03_7a4082fbdd8aa.jpg">

Pew Pew Madafakas Coaster

signs

nyx_nk

3D model of the Colosseum printables without supports.&nbsp;This model could be used as retraction/stringing test

Supportless Colosseum

history

makerhek

Simple bookmark to print quickly in the shape of a rose on the occasion of Valentine's Day or Saint George's Day &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/426025/2024-01-19_426815f829aaf.jpg"></figure>&nbsp;Does not spoil the page of the book

Rose bookmark

bookmark

Ilorium02

Small mixing bowl and the spatula. That actually says it all :D

Epoxy Glue Spatula & Bowl

tools

franceschellifederico

Introducing the "Cable Organizer" – a practical solution designed from the ground up by Federico Franceschelli. Tired of tangled cables and cluttered workspaces? This sleek and user-friendly cable organizer is the answer. With a focus on simplicity and functionality, ensures easy cable management for a tidier and more organized environment.&nbsp;Key Features:<ul><li>User-Centric Design: Created with the end-user in mind, this organizer is intuitive and easy to use.</li><li>Versatile Compatibility: Accommodates various cable sizes, keeping everything neatly in place.</li></ul>Say goodbye to cable chaos and hello to a cleaner workspace with the "Simple Cable Organizer" by Federico Franceschelli. Download it now and enjoy a more organized and efficient daily routine.