Carry

Shaztech.info

8 Trays HDD Box for NAS/ServerFully printed enclosure (you can print the external case or make your own in wood/metal/aluminium)Using long SATA/SAS cables, so no complicated electronicsAll parts are easily available on Amazon/Aliexpress/EbayTrays are available for 3.5 and 2.5in HDD/SSD&nbsp;Connect the fan to the 12V wire (Yellow)Connect the LED with the resistor to the 5V wire (Red)&nbsp;Overall dimensions: 268mm (10.55 in) wide, 214mm (8.43 in) depth, 152mm (6 in) Height&nbsp;Bill of Materials:42x - Torx Screws #4 x 1/2&#34; - McMaster #99512A219 8x - Socked Head Screws M3 x 22mm - McMaster #91290A124 1x - Computer Fan 120mm (with 4 screws) 1x - 5mm LED + resistor 2x - Quad SATA 1 Meter Cable (or SAS if you have a card) (see pictures) 8x - SATA Adapters Male to Female Straight (see pictures) 8x - SATA Power connector (Puncture type without soldering, can be salvaged from old cables) (see pictures) Some 16 gauge wires to create your power cable (2x Female molex to one end)&nbsp;If you want smaller check my 4 Trays box.(12 Trays 3U rack mountable coming soon….)&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/shaztech_info" rel="nofollow noopener">Buy me a coffee</a>

8 Trays HDD Enclosure (SATA/SAS)

硬盘

uhltimate

Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions and start printing your own today!&nbsp;Update:01.05.2024 - Added a guided Blade Version with a stronger locking mechanisms.02.05.2024 - Added a comb Version as alternative.&nbsp;Features:<ul><li>Three easy-to-print parts</li><li>Smooth OTF action</li><li>Portable design for on-the-go fidgeting</li></ul>Instructions:<ol><li>Print the three parts.</li><li>Follow our assembly video.</li><li>Enjoy your custom OTF fidget knife!</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/IQcEFHvocRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IQcEFHvocRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

OTF Fidget Knife - only 3 Parts

日常用品

Josh-3D

<h3>Model</h3>A phone stand to go along with the<a target="_blank" href="https://makerworld.com/en/models/189326#profileId-208776" rel="nofollow noopener"> Headphone stand I made!</a> A few people had suggested this, so figured why not?&nbsp;Model is featured in Bambu PLA Matte Charcoal, and Bambu Iridium Gold Metallic for the main print. For the second print, it is featured in Bambu Charcoal and Polymaker Muted White.&nbsp;(Keep scrolling past the updates for required hardware and assembly instructions!) &nbsp;[Update 1]I added a step file for the main phone holder, to the raw files, to make it easier to adjust for other sized phones/devices that don't fit into the holder as it is now! If you modify the phone holder portion, please share! You can include the modified holder as a new print profile (No need to donate points, you did the tweak!), or if you'd prefer, you can just post it as it's own object. Just send me a link, and I'll add it in the description here to help make sure people find it.<figure class="image image_resized" style="width:30.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-26_265822ae21a7.png"></figure>[Update 2]I added a print profile that provides a variation on the holder part, adding in holes on the bottom to better allow for a speakers/mic to work without interference, as a user had requested one. <figure class="image image_resized" style="width:30.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_a1b94dad29915.png"></figure>[Community Spotlight]Thanks to <a target="_blank" href="https://makerworld.com/en/u/1489256341" rel="nofollow noopener">o.0jack</a> for the a1 mini profile<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_ada1894ffcacd.png"></figure><a target="_blank" href="https://makerworld.com/en/u/4171661601" rel="nofollow noopener">rakibby </a>has provided a version of the holder that's a little deeper (17mm!) so if you've got a thicker phone, check out rakibby's print profile! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_1fd7a9c8d8b06.png"></figure><a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Design</a> has made us a <a target="_blank" href="https://makerworld.com/en/models/217683#profileId-236629" rel="nofollow noopener">TPU Sock</a> to help keep the stand in place. They look great and match the style! <figure class="image image_resized" style="width:29.75%;"><a href="https://makerworld.com/en/models/217683#profileId-236629" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-03-01_7d2974c2e301d.png"></a></figure>&nbsp;[Tools & Assembly]Like the Headphone stand, the cell phone stand is pretty easy. You'll need the following hardware and tools.I designed this to use M3 socket cap screws.Hardware Needed:M3x12 - 4 (used for the feet)M3x25 - 3 (Used to connect the swing arm to the stand, and the phone holder to the swing arm)M3x30 - 1 (Used for the knob for the swing arm)M3xNuts x 9 (The knob makes use of two nuts!)Tools Needed:Hex DriverDrill bit for clearing holes&nbsp;Start by drilling out the holes in the feet and knob. These holes were partially blocked to get a cleaner print. All the other holes should be sized that a M3 screw can fit through without being too tight, but things like variation in filament properties might make the holes tight, so if you can't freely push a screw through the holes in the frame, clear them out with an appropriately sized drill too.<figure class="image image_resized" style="width:49.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_dee28ae5b0db5.png"></figure>Next, Prepare the knob! We'll feed a M3x30 screw through the hole and through a nut that'll be embedded on the other side of the knob. Tighten it down!<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_27826e74eb785.png"></figure>Now we'll assemble the main frame! There's embedded slots for all of the M3 nuts, so go ahead and prepare by putting all the nuts in place. Next, we'll install the feet, as once the holder and swing arm are on, it can obstruct access to the screws for the front feet. Use M3x12 screws for the feet! For the swing arm, attach the two phone holder sides using M3x25 screws. Attach the arm to the base using a M3x25mm screw, but make sure not to over tighten it as we don't want the hing to be too stiff! Lastly, install the knob through the guide and swing arm and tighten it down!<figure class="image image_resized" style="width:73.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_9f8ad10fc9a09.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Phone Stand - Industrial 

日常工具

user_1179394215

将小米智能摄像机2K版装在拓竹A1mini上，以便随时查看打印机工作状态。

小米智能摄像机2K支架源文件 拓竹A1mini

小米系列

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the Babo organizer insert gridfinity adapter . This can hold up to 5x5 gridfinity boxes.According to gridfinity rules, boxes are raised in 7mm increments.<a target="_blank" href="https://www.printables.com/model/576213-babo-organizer-drawer-modul-30" rel="nofollow noopener">The BaBo drawer modul 30</a> can hold up boxes till 28mm (XxXx4)<a target="_blank" href="https://www.printables.com/model/581438" rel="nofollow noopener">The BaBo drawer modul 60</a> can hold up boxes till 56mm (XxXx8)<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568406/2023-09-13_bg3sf5auk6v8.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee (PayPal).</a> Thanks!

[BaBo] insert gridfinity adapter 7x7

工具盒

必应小混子

拓竹a1mini和ams lite使用的料盘，已经过测试

必应—a1系列料盘

料盘

Bambu Lab

This is an official component set by Bambu Lab for the A1 printer. The AMS lite Top Mount setup is a tested solution for mounting the AMS lite on top of the A1 printer.&nbsp;The component set consists of two main modules:<ol><li>Top Mount Bracket</li><li>Z-Axis Stiffener</li></ol>The Top Mount Bracket is meticulously designed to be tilted to the front for better balance. Additionally, the upper half of the bracket can spin left and right, providing easier access to the back spools.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2023-12-14_ceeb9c0ed0a76.jpeg"></figure>&nbsp;The Z-axis Stiffener is designed to dampen back-and-forth printer movements. Thanks to the special elastic damper design at the bottom, there is minimum wobble even when printing in ludicrous speed with AMS lite fully loaded.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_cafcdb16e7224.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_4980ec2ffcf67.jpg"></figure>&nbsp;AssemblyHere is a tutorial video for the installation:<figure class="media"><div data-oembed-url="https://youtu.be/RmZOgrcDiRQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RmZOgrcDiRQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;You can also buy the required hardware as a kit from here:<a target="_blank" href="http://store.bambulab.com/products/ams-lite-top-mount-screws-kit" rel="nofollow noopener">http://store.bambulab.com/products/ams-lite-top-mount-screws-kit</a>&nbsp;&nbsp;&nbsp;&nbsp;

AMS lite Top Mount for A1

Boogie 3D

I made a measuring tool for metric screws.This tool can measure M2-M10 screws with a length of 4-120mmPrinting instructions:<ul><li>0,15 mm layer height</li><li>no supports</li><li>infill 15%</li><li>rectangular infill</li><li>2 perimeters</li></ul>

Screw measuring tool, M2-M10, 4-120mm

通用工具

MrColor

Download the "raw model files" where you can find the temp tower with temperature coded in BambuStudio!!!&nbsp;Print profile from makerworld website doesnt contain temperature change! Only raw model files&nbsp;Only 1 hour print to check two overhangs, strings, bridges.

ABS temp tower - ultimate bridging, stringing, overhang test - temperature coded!

温度塔

<h2>Semplice soluzione funzionale per poter appoggiare ams su asse Z.</h2><h2>Testato per 2 mesi, nessun difetto di stampa ed estrema stabilita</h2>

Ams a1 mini up

mini

We77777

Magnets Size10mmx2mm       x4

Pipe Adaptors 通风管道接口

打印机配件

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

玩具

不安先生

我将把自己设计打印过的咖啡模型上传至这个帖子，欢迎大家反馈我目前自己在用的包括：58mm粉碗支架 （4接口）咖啡豆试管灌装漏斗