Capitanomalato

KO Additive Labo

Lightbox Cyberpunk

Luci

NagyBig

The pack was meant for decorative purposes.&nbsp;All parts are interchangeable, insert core and glue it.&nbsp;Original upload date: 2023 Dec. 14Updated Jan. 11, Core pieces.

Kunai pack

Nerd

Kakashi Hatake - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Jayo Meta Gray Transmission Distance: 3.5 PLA EryOne PLA+ IVORY WHITE Transmission Distance: 5 PLA EryOne Rose Red Transmission Distance: 4.5  Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Gray At layer #19 (1.6mm) swap to WHITE At layer #28 (2.32mm) swap to Red for the rest. How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454854/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454854/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!

Kakashi Hatake - Naruto (Hueforge)

Quadretti

Keebitzenny

Hey everyone!&nbsp;Here's my candy bowl inspired by Gengar our favorite ghost type! &nbsp;If you choose not to use the 3mf, this does require at least 5% infill and tree supports. If you print one, please upload pics!

Gengar Halloween Candy Bowl (Scalable)

Pokemon

Cj 3DPRINT

shelf skadis for your hueforge &nbsp;hueforge cat here:<a target="_blank" href="https://makerworld.com/en/models/446601#profileId-353110" rel="nofollow noopener">https://makerworld.com/en/models/446601#profileId-353110</a><a target="_blank" href="https://makerworld.com/en/models/169738#profileId-186394" rel="nofollow noopener">https://makerworld.com/en/models/169738#profileId-186394</a> &nbsp;I hope you like it Please put a like it&#39;s always a pleasure and follow me, sharing your prints and give me a boost 🙏🙏🙏.

shelf skadis hueforge

Ikea

Buddz

I wanted to store my filament swatches in a thin compact method that can be stored on top of my printer next to the AMS. Addition of the slider allows the removal of the swatches.&nbsp;Print settings:Print used the PLA 0.20mm Standard profile with the only change of Aux fan off.&nbsp;Can operate the slider one handed but installing rubber feet to the underside is optional.Recommend to use the slider multiple times to loosen the slots

Linear Filament Swatch Holder - Lifts Swatches

gadget stampa

Nash