calvinhjpk

up.side

Mask looks amazing. I got quite a big head (helmet size M to L), but it fits neatly.&nbsp;The hex pattern perfectly hides the print height lines and makes the model look absolutely incredible, especially compared to the flat versions, available. I mean, just look at the pictures!!&nbsp;All tributes to @Budwin <a target="_blank" href="https://www.printables.com/cs/model/684499-spider-man-2099-v2-helmet-textured" rel="nofollow noopener">for the model from Printables</a>.&nbsp;Important: The upload keeps failing, so please check the raw files and download the skull part of this print. Slicing takes a while due to the large size (10 min +).&nbsp;Print notice:<ul><li>Recommended to use the two .3mf files, I provided, one for the smaller parts and one for the rest.</li><li>Back part and eyes could be put on one plate.</li><li>Printed the big part of the mask with .2 layer height and supports strongly recommended to ensure quality.</li><li>Other parts require supports as well, got a very nice finish with .16 layer height.</li><li>Used Sunlu Meta PLA, but it should work with any.</li></ul>Magnets:You need <=<a target="_blank" href="https://de.aliexpress.com/item/1005003681782333.html?spm=a2g0o.productlist.main.21.53e14df9Z4wAVz&algo_pvid=21562305-5b6b-4cba-b1bf-99c570b47844&algo_exp_id=21562305-5b6b-4cba-b1bf-99c570b47844-10&pdp_npi=4%40dis%21EUR%216.12%212.87%21%21%216.50%213.05%21%40211b81b117069700148014558e734e%2112000026782298864%21sea%21DE%210%21AB&curPageLogUid=SzbNKQLrRqUo&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">72 magnets of 2x7mm, like these</a>.However, the holes for magnets are ~7.7 mm , so you either need to modify each hole to ensure pressfit, or use glue instead.

Spider Man 2099 V2 Mask Helmet Cosplay Hex Pattern

Jordey

Emoticon

Smiley face rollers for the business card embosser just for fun. If you're not getting a good impression try flipping the rollers or swapping their positions. I find it works best to assemble the gears and make them mesh properly holding them together, then insert both rollers and their gears all at the same time to make sure they don't shift out of mesh when putting them in. The negative and positive have to fit together for the best impression. To build the rest of the device these rollers go with see this link here: <a target="_blank" href="https://makerworld.com/en/models/148536#profileId-162074" rel="nofollow noopener">Business Card Embosser - Level up your business cards! by Makerspace.Online - MakerWorld</a>&nbsp;See the key I made to go with this embosser too that makes it easier for people to turn: <a target="_blank" href="https://makerworld.com/en/models/155773#profileId-170536" rel="nofollow noopener">https://makerworld.com/en/models/155773#profileId-170536</a>

Business Card Embosser Smiley Face Rollers

rollers card

XuiF0115

材质：PLA耗时：1h50m重量：36g

[蝴蝶刀] Butterfly knife

weapons

EmBy Designs

First in the series.Not suitable for users who consistently remove the SD Card as there is no access hole.&nbsp;2 versions; AMS and non-AMS. AMS - Push the Joy Cons onto the frame. Non-AMS - All parts are push-fit and do not require glue but there is no harm in using a few drops for peace of mind.

X1 Carbon Screen Decoration Nintendo Switch

printer accessories

nicodeimos

Ring hole: 4.8mm.Model size: 23mm x 47mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Zelda Master Sword keychain

keychains n coasters

EndK7Designs

<h2>Summary</h2>Heres a very cute little friend for you I love the Axolotl, they are so special creatures Now you have the possibility to print your own onesEasy print no supports necessary the Joints are extra strongHave fun with this print. Don&#39;t forget to like &amp; rate ❤️.Please share your make with meFor more amazing articulated designs check out my <a target="_blank" href="https://cults3d.com/en/users/EndK7/3d-models" rel="nofollow noopener">Cults Page</a>This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially If you are interested to use all of my designs commercially (digital files excluted!) or you just want to support me, visit my <a target="_blank" href="https://www.patreon.com/EndK7" rel="nofollow noopener">Patreon</a> Please note that you only have a commercial license with active patreon subscription<h2>Print Settings</h2>&nbsp;Notes:   FDM SettingsA leveled bed is required for a nice result 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues I recommend to activate the Z-jump 0.3-0.5mm for more safety

Very cute Axolotl - ARTICULATED - NO SUPPORTS 

Toys

SavageLau

&nbsp;This simple tool is fast to print, and cost very little filaments, 1.95g each.This tool will help you lube on the z and y axis (lead screw and linear rod).Extended length handle will help you easy to reach center one that within the cover.You can control the angle to push how much lube apply to the screw.<figure class="image image_resized" style="width:78.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_10731b083ab3.gif"></figure>&nbsp;<h3>Leadscrew:</h3><figure class="image image_resized" style="width:77.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_047b690a0cf77.jpg"></figure><figure class="image image_resized" style="width:77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_0136c09e64bc8.jpg"></figure><h3>Linear rods:</h3><figure class="image image_resized" style="width:76.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_25301222a7901.jpg"></figure><figure class="image image_resized" style="width:76.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_6dbff3848e74c.jpg"></figure>

Jordey

rollers card

weapons

printer accessories

keychains n coasters

Toys

Tools