cajunmgster

Isabella

Ben 3D

Here is a great tool to grease your lead screws using 3oz/85g super lube grease tubes! Put the nozzle tip onto your lead screw and squeeze the tube! Simple and effective!&nbsp;This tool allows you to get to those hard-to-reach lead screws like the back X1C/P1P/P1S lead screw along with the A1 and A1 Mini lead screws.&nbsp;Grease Used: Super Lube 92003 Silicone Lubricating Grease with PTFE&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B0081JE0OO?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Super Lube 92003 Silicone Lubricating Grease with PTFE, 3 oz Tube, Translucent White: Amazon.com: Industrial &amp; Scientific</a>

X1/P1/A1/Mini Superlube Lead Screw Applicator

X1C accessories

jsfn91

<h2>Hueforge picture of cute Christmass kitten</h2>Nice drawing of kitten and christmas presents - optimized to be 3D printed using 4 colors and to have short slice time.&nbsp;Feel free to experiment with various filaments, but use recommended filaments to get the same result.&nbsp;Recommended colors are Black, Red, Yellow and White.&nbsp;Don't forget to upload results of your prints :)&nbsp;Generated using Hueforge.&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm&nbsp;Filaments Used:PLA Aurapol Black Transmission Distance: 0.2PLA Aurapol L-EGO Red Transmission Distance: 2PLA Aurapol L-EGO Yellow Transmission Distance: 2PLA Aurapol White Transmission Distance: 1.7&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.48mm) swap to L-EGO RedAt layer #17 (0.88mm) swap to L-EGO YellowAt layer #27 (1.28mm) swap to White for the rest.

Christmas kitten (Hueforge)

Printed

alexanderfaucher

Quick and dirty remix to mount RC airplanes to rubbermaid fast track rails. Useful for other purposes as well.&nbsp;Three shapes:<ol><li>Hanging Hooks</li><li>Extended Slots (5mm)</li><li>Lightweight shelf</li></ol>&nbsp;Using them all to support RC planes, so no more then a pound per part.&nbsp;Printed in PETG for flexibility to mount and strength.

Fast Track Hooks & Hangers

wall rails

SMichaud

Lot of bearing.Important print in 0.12 or lower, if you print bigger (0.16/0.2/0.24 etc..) the pieces will merge.&nbsp;For imperial bearing → <a target="_blank" href="https://makerworld.com/en/models/146209#profileId-159197" rel="nofollow noopener">https://makerworld.com/en/models/146209#profileId-159197</a>&nbsp;

Print in place Bearing metric

B&B Bearings and Bolts

evax design

This is a mandala organizer. It has never been so easy to be in order. It's something everyone can enjoy!The height is 2.5 cm, the width is 20 cm and the thickness is 0.2 cm. Before printing, see the printing instructions. Printing instructionsPrint orientation should be placed sideways on the bottom surface. It is intended for printing without supports. We print with layer 0.3 and nozzle 0.4 and with 10% filling and 2 perimeters.

Mandala Organizer Box

mandala 

3DMON maker

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.&nbsp;Updated on Jan. 7th, 2004- The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it.- Also, you can add one more bracing when you use the wall extension for more rigidity.&nbsp;Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2.* All pins are redesigned for better strength. Thanks for the great idea! <a target="_blank" href="https://www.printables.com/@djwhouse" rel="nofollow noopener">@djwhouse</a> Now, pins can be printed horizontally.<ul><li>Pin1 v2(13mm) & Lock : for assembling bracing parts.</li><li>Pin2 v2(40mm) : for adding side wall extensions.</li><li>*Pin3 v2(20mm) : for joining bracing assembly and side walls.</li><li>*Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.</li></ul>&nbsp;If you need a build plate holder version, please check the link below.<a target="_blank" href="https://makerworld.com/en/models/62232#profileId-64745" rel="nofollow noopener">https://makerworld.com/en/models/62232#profileId-64745</a>&nbsp;

AMS Stacking Stand Remix

reddadsteve

Wile E. Coyote, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros.He is a cunning, devious and constantly hungry coyote repeatedly attempting to catch the Road Runner. Instead of using his animal instincts, the coyote uses absurdly complex contraptions to try to catch his prey, which comically backfire, with the coyote often getting injured in slapstick fashion.No supports are required. One piece contains built-in supports and two other parts contain built-in braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.The assembled model is 175mm tall, 315mm long and is mostly in proportion to my previously released Looney Tunes models.Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing, helping me work through my mistakes and quality feedback............................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10% (infill for body_front should be higher for strength in the arm, 20%)Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) eyes_black_left eyes_black_right nose cart_wheels (contains four identical pieces) toe_nails (contains six identical pieces) match_stick star_black_back_left star_black_back_right star_black_front_left star_black_front_right ..Beige: (Paramount3D PLA - Universal Beige) rope_back rope_middle rope_front fuse ..Yellow: Paramount3D PLA - Simpson Yellow) flame_yellow eyes_yellow_left eyes_yellow_right ..Orange: Paramount3D PLA - McLearen Orange) flame_orange ..Grey: Paramount3D PLA - Prototype Grey) cart_leg_left cart_leg_right cart_pins (contains four identical pieces) ..Blue: Paramount3D PLA - Autobot Blue) acme (contains all the letters for ACME CO.) ..Dark Yellow: (Paramount3D PLA - EggYolk Yellow) star_yellow_back_left star_yellow_back_right star_yellow_front_left star_yellow_front_right ..Dark Red: (Paramount3D PLA - Iron Red) eyes_red_left eyes_red_right ..Red: (Hatchbox PLA - True Red) flame_red rocket_nose rocket_body rocket_body_back (optional piece) rocket_body_front (optional piece) ..Light Brown: (Polyterra PLA - Wood Brown) face face_without_braces (optional piece) ear_inside_left ear_inside_right eyebrows ..Medium Brown: (Polymaker PLA - Army Brown) cart_top body_back body_middle body_front bopy_front_without supports (optional piece) ears (contains both ears with braces to make printing easier) ear_left (optional piece) ear_right (optional piece) ..Any color: (hidden piece): pin_rocket_body (optional part only needed if the two part rocket is printed) pin_body (contains two identical pieces) .............................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. One piece contains built-in supports, body_front. An optional part without the built-in supports is also supplied if you want to use your slicer supports. The built-in supports are designed for a .4mm nozzle and for the size that the model is presented. Use your discretion for which part to use if you resize the model significantly.2 - The right arm on body_front is a quite fragile, just below the elbow, (until the guling process which holds everything together). Be very careful when removing the supports and handling the part.3 - Optional rocket body parts. Both a one piece rocket body as well as a split rocket body (with pin) is supplied in case your printer Z-height cannot print the one piece. My print contains the two piece rocket body, with the seam hidden by the middle rope.4 - Optional ears parts. I tried printing the individual ears with a raft and still had a print failure due to the smallish base on the ear parts. So, I created a part that contains both ears with braces to hold them in place while printing.5 - Face contains built-in braces to hold the part down while printing. An optional part without these braces is also supplied.6 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I used brims on: - eye_right - eye_left - toe_nails - flame_yellow7 - When removing parts from the printer bed, it's a **VERY** good idea to place left/right parts into separate containers to help with the assembly process. Sometimes the difference between the left and right parts is very small but it is still worth keeping track of them and assembling them in their proper place... Assembly tips:1 - Take your time gluing the model together and enjoy the process. Dry fit all the parts and give some thought into which parts to glue together as groups and then gluing the groups together. Let the glue for each group set completely before combining groups.2 - I used 3D Gloop and E6000 to put this model together. I am not affiliated with 3D Gloop but have experimented with different glues for my models and have found that this glue is a great option for my models. Each type of glue has different pros/cons and I found that 3D Gloop was far easier to use than superglue (for me). The E6000 sticky glue that I also use allows more time to position parts and is still the best for smaller parts. 3D Gloop covers the middle ground for me and really works wonders. It leaves enough time to set, so parts can be positioned correctly and it dries fast enough to hold awkward parts without the need for taping. I used the PLA version that comes in a tube. For both glues using a smaller amount is usually better than more glue.3 - **important** The right ear (with insert) is inserted from below the right arm into the body_front. When glued, it should not only be glued at the attachment point but also to the arm to give the arm some support.4 - The cart legs are taller in the front, to help tilt the model slightly upwards.5 - The ropes should be flexible enough to be stretched to go over the body and rocket. Note that each rope is different and that they should fit all the indents perfectly, especially at the base. It a rope does not fit flush, flip it around.6 - In order to get the flat ACME letters to glue properly to the rocket, I spread a thin layer of glue on the whole letter, placed it in position, and then used a heat tool or hair dryer (very low temp) to soften the letter enough that it could be pressed down. Note that one 'M' (right side) and one 'O' (left side) are cut so as not to interfere with the rope indent.7 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;&nbsp;

Wile E. Coyote

Dad 

chuckkay

added a coin sifter found on printables to the projecthttps://www.printables.com/model/680879-coin-lift-for-coin-sorting-vault&nbsp;

Coin Sorting Vault with coin sifter for a batch coins

coins

SmokieMcagee

Fits most magazine fed pistols. No Supports needed. click to paint or use the pre loaded file

Pew Pew Pistol and Magazine Stand

pew pew

christiansotelo2244

A modular hydroponic tower garden made by <a target="_blank" href="https://www.thingiverse.com/boundarycondition" rel="nofollow noopener">boundarycondition</a> on thingsverse!

Modular Hydroponic Tower Garden

plants

Cayouche

I used those led -https://a.co/d/7SEqwCd&nbsp;socket of the base is a direct fit for the led stick

Pikachu lamp

LIghts/Lamps

Crafty Sven

No supports needed. Make sure that the bed is clean and the first layer adheres properly, glue is recommended.&nbsp;Good luck and happy printing ! ^-^&nbsp;I suggest trying the non AMS version 1st to see if you like the design and size. &nbsp;You can scale this up to 150% !

Ancient Guardian Articulated from Zelda 

Church Showcase

RestoreDoctor

Radius Gauge R1-30mmSimple tool for determining the radius. A must for being able to draw parts!&nbsp;Settings:<ul><li>0.20mm Standard </li><li>Infill 20 %</li><li>no support</li><li>PLA/ PETG</li><li>Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/578621/rich_content/fa528cba-7f9d-4977-a2a8-8de6a90157df/thumbs/cover/800x466/png/screenshot-2023-09-10-171052.webp"></figure>

Radius Gauge R1-30mm

functional 

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Overture v2 print profile is the original print profile updated with a new model. It's a redesign based on user feedback and also uses about 40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>OVERTURE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the OVERTURE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

OVERTURE Bambu Lab AMS Cardboard Spool Adapter Ring

Filament cardboard adapters

Bottega.co.nz

Original art created by us, then we used Hueforge to create this 200x200 piece.&nbsp;Please share your prints&nbsp;Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Matte Ivory White &nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #10 (0.88mm) swap to Yellow At layer #15 (1.28mm) swap to Ivory White for the rest.

Santa's hotrod - Hueforge

hue I have colors for 

Kardes.Design

A cute Robo-cat with a lid and a small drawer to store small items.&nbsp;Print the inserts separately to create your own custom color combination.&nbsp;Only the inside of the head (The box) requires support which is effortless to remove because it is a flat surface.&nbsp;Assembly:&nbsp;Just push the inserts into the holes and they should fit snuggly without any glue.&nbsp;The claws can also be inserted in both ways.&nbsp;Please let me know if any if the inserts are tight or loose so that I can upload an updated version. I have already tested it multiple times with my calibrated PLA and everything works flawlessly.&nbsp;

Robo-Cat storage

Kids

Bean Eating Cookies

Valentines day cookie cutters and stamps. These are the updated design with a taller blade and thinner for a better cut. They are Cutters and stamps separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out! If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp?image_process=format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>

Valentines day cookie cutters and stamps

Cookie Cutters

tgsparky77

Star Wars Logo for those awesome fans. Two versions for the wall or on a shelf&nbsp;

Star Wars Logo Mural V1

star wars 

BerryBLK

*** So it was brought to my attention that I have the blue and red colors of the flag reversed…. I apologize for that. I went ahead and updated the files and the sliced plate to correct this mistake!&nbsp;&nbsp;Hi there! I have designed this light box for a friend of mine, and I thought I would share it with anybody who might want it. I have made the opening as small as possible to accommodate these lights from amazon; <a target="_blank" href="https://www.amazon.com/dp/B0B7P65KWM?ref=nb_sb_ss_w_as-reorder_k0_1_8&=&crid=196FMIIPPSVUK&sprefix=cob%2Bled%2B&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B7P65KWM?ref=nb_sb_ss_w_as-reorder_k0_1_8&=&crid=196FMIIPPSVUK&sprefix=cob%2Bled%2B&th=1</a>&nbsp;The settings included in the files are what works for me. I usually pause the print after a color swap to give me time to clean the stringing from the previous color, resulting in a cleaner print.*** Since I only have one AMS unit I was limited to only 4 colors. The yellow box will show infill when lit up, that's why I reccomend changing the infill to 100%. If there is interest, I can upload a version with the black box.&nbsp;If you print this I would love to see it! Please leave feedback as I am new to creating profiles, I would like to know what I'm doing wrong!

Filipino Flag Light Box

Jargcomp

This is a really fun print that has mulitple layers as originally designed by 5narkHunt3r. The only issue I found was it broke really easily. I removed the joints and replaced them with a stronger one I designed. It took some time but was a good learning experience.

Articulating Monarch Butterfly (Remix)

articulate 

Martin Kozak

Disclaimer 1: This is NOT a Lego Technic.Disclaimer 2: Model is huge, 57 cm long and needs almost 5 kg of filament. PLA recommended.&nbsp;<h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406774/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation: https://makerworld.com/en/models/133466#profileId-144763

Mining truck 300 %

Big Toys

uhltimate

Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm, you'll have the upper hand in the mosquito-hunting game.&nbsp;IMPORTANT: "min. 4 Wall loops" if the spring has infill pattern, it will not work&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Mk_qMPQVysw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Mk_qMPQVysw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Fly Swatter Gun Card

random

Taikounou

Are you looking for a fun way to say “Thank you” for your Christmas presents? Well look no more than this customizable Hueforge Thank you card!&nbsp;It is pretty straight forward, edit the text objects (second picture) to display the message you desire! Keep in mind though, that if your message is too long, you will need to edit things more to fit. Some fonts may not work as well at this size, be sure to check in preview that the text is displaying correctly.&nbsp;Printed at 100% infill uses approximately 17g and takes a little less than an hour and a half.&nbsp;Base layer .16Layer .08&nbsp;Color swapsStart blackSwap to teal at layer 7Swap to ice blue at layer 11Swap to white at 13And the final swap is at 19, this is the color of the custom text, and is selected for teal, change to whatever color you like best!&nbsp;Thank you for checking out this file, and downloading it, if you do!

Hueforge Thank you card (Semi-customizable)

hueforge 

Dinozzo28

Print in 4 minRatedGet point

Rated test plate takes 4 min

Testing

Regarnogal

Gravitrax compatible marble corkscrew.Important to have enough Power so the marble comes through! ;)The 2 rings fit in the holes on the ground (makes it easier to print without supports)is printable without any supports on P1S and Bambu PLA&nbsp;i have added a second profile with separated parts

Marble Corkscrew Gravitrax compatible

marble's

DaTryhard22

This a scale folding camp stove to carry around on your RC crawler to add details to your scale campsite. This stove opens up and has deployable windscreens. There is also a scale propane bottle and accompanying adapter. &nbsp;Multicolor printing can help add more details to this print. I recommend the use of a .2mm nozzle to give your printer a better shot at reproducing the fine details of this model. Ensure your support settings are well-tuned to reduce scarring on the underside of parts (As seen in the cover photo). I used these small metal hinges to connect the lid to the base: <a href="https://www.amazon.com/dp/B07YFYBZWJ?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow">https://www.amazon.com/dp/B07YFYBZWJ?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;The hinge is held on by small plates that can be secured by welding them on with a low-temperature soldering iron. Set the temperature to just below the printing temperature of your filament. Assembly order: <ol><li>Slip the lid latch through the hole on the front of the lid and use the soldering iron to flatten the part that sticks through like a rivet. Then add a bit of superglue to secure the joint in place. </li><li>Slip the hinges into place on the lid.</li><li>Place the hinge plates over the hinges on the lid and snap them in place. Then use the soldering iron to weld them into place. </li><li>Slip the lid assembly into the base insert and repeat steps 2-3 on the base insert. </li><li>Slide the left windscreen in place in the base insert and then fold the tabs over with the soldering iron being careful not to melt them. Gently fold the windscreen back and forth to ensure it moves freely. </li><li>Repeat Step 5 for the right windscreen cover.</li><li>Apply glue to the base and place the base insert into the base with enough pressure to set the glue.</li><li>Slide the grill into place to complete the assembly of the grill.</li></ol>

Folding Scale Camp Stove - 1/10th Scale

pixelwave

A detachable bottle and smartphone mount for a 25mm pole (+/- 3mm). The chair mount I printed in Prusament PETG, the bottle holder in Prusament PLA.&nbsp;Additionally the design uses:6x M5x16 mm Screws + M5 Nuts2x Rubber Bands (optional to place inside the clamp groves)&nbsp;I also attached the Fusion 360 File for further modifications. Please link if you upload modifications! :)&nbsp;@UPDATES:221014 - V5<ul><li>added a large version (fits 10cm 1,5L bottles) Bottle Holder V3 - 10cm</li><li>old size still available Bottle Holder V3 - 8.8cm</li><li>changed alignment of holes for easier print</li></ul>220822 - V4<ul><li>Updated Bottle Holder V2 with two compartments and symetric mounting option</li></ul>220523 - V3<ul><li>Changed tolerance of mount (-0.1mm)</li><li>Rounded Corners for better insertion</li></ul>220522 - V2<ul><li>Changed tolerance of mount (-0.2mm)</li></ul>_______If you like my uploads buy me a coffee -> <a href="https://bit.ly/pwave-donate" rel="nofollow">https://bit.ly/pwave-donate</a>

Fishing Chair Bottle & Smartphone Mount (Carp On)

outdoors 

Creativity Lab

Give your friend a special gift!Multicolor and Single color

Circle Game Gift Box

gift

svest1466

100mm flat USMC coaster. Oriented face down for better quality. Based off a similar model of a lightbox. Let me know what you think Thanks! set to 1.04 flow rate to get all the cracks.

USMC Coaster

military 

Memel Magic

“This is the way”A logo is added on the base for extra details.

The Mandalorian Star Wars - 25cm

figures

3DMN

If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a> &nbsp;&nbsp;Step into the Star Wars universe with our incredible AT-AT Kit Card! This intricately designed model brings the iconic AT-AT Walker to life in stunning detail, capturing the essence of the Galactic Empire&#39;s formidable ground assault vehicle.&nbsp;Immerse yourself in the thrill of assembling this miniature masterpiece, as you recreate the epic Battle of Hoth scene from &#34;The Empire Strikes Back.&#34; The kit includes all the necessary components for a satisfying and enjoyable building experience.&nbsp;Whether you&#39;re a Star Wars enthusiast, a model-building aficionado, or just someone looking for a unique and captivating project, our AT-AT Kit Card is the perfect choice. Showcase your passion for the galaxy far, far away with this eye-catching display piece that is sure to be a conversation starter among friends and fellow fans.

Star Wars AT-AT Kit Card

kit cards

I colored the pupils with a pen.Settings:<ul><li>0.20mm Standard +custom settings:</li><li>Wall loops: min. 2</li><li>Infill 30 %</li><li>supports are not necessary</li></ul>

YOU ROCK - Trophy

trophy's 

hologos

This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032.<h3>Print Settings</h3>Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15% lightning (lightning infill will save some filament) Supports: no need if you have good cooling

Battery box organizer (20xAA, 20xAAA, 2x9V and 4xCR2032)

organizers 

RMF Designs

Toyota 4Runner Coaster

ATTV85

Box for my version of balance tetris game<a target="_blank" href="https://makerworld.com/cs/models/79755#profileId-90070" rel="nofollow noopener">Tetris balance game by ATTV85 - MakerWorld</a>

Tetris balance game box

toys

Tommy Gun

Here&#39;s a nice set of 5 coasters and amazing question mark block coaster holder/box !!&nbsp;Easy print, only have the ? and dots inserts to glue on as i wanted to save on filament !!!&nbsp;Coasters Dimensions: 104 mm diameter 4 mm height&nbsp;-Print x4 question mark inserts and x16 Dots inserts&nbsp;Interested in selling my prints : <a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a> &nbsp;Brother Box <a target="_blank" href="https://makerworld.com/en/models/112575#profileId-120555" rel="nofollow noopener">https://makerworld.com/en/models/112575#profileId-120555</a> &amp; Super mario Pipe holder : <a target="_blank" href="https://makerworld.com/en/models/101819#profileId-108453" rel="nofollow noopener">https://makerworld.com/en/models/101819#profileId-108453</a>&nbsp;Pen box&amp;pipe holder : <a target="_blank" href="https://makerworld.com/en/models/141100#profileId-153752" rel="nofollow noopener">https://makerworld.com/en/models/141100#profileId-153752</a> &nbsp;Question mark lightbox : <a target="_blank" href="https://makerworld.com/en/models/127720#profileId-138211" rel="nofollow noopener">https://makerworld.com/en/models/127720#profileId-138211</a>&nbsp;Grey Brick coaster box and coasters : <a target="_blank" href="https://makerworld.com/en/models/210143#profileId-230023" rel="nofollow noopener">https://makerworld.com/en/models/210143#profileId-230023</a>

Super Mario ? Coaster Box and Coaster set x5

kitchen 

3D6 Designs

Made this for my friend who officiatedmy wedding. He loves TMNT so I gave a shot creating the iconic sewer grate logo. Just used some super glue to combine the two pieces.

TMNT Sewer Logo 

wall mounts

PrintsByJar3D

Hey Bub…&nbsp;I'd like to first point out that this is not your traditional Hue Forge model as it can actually be resized to fit your build plate preferences without having to adjust your z length. I did make the model in Hue Forge, but each color/layer was split so that you can have the ability to resize it freely (that is for you A1 Mini users out there, you're welcome!) Secondly, I made this model with having 7 colors in mind, and as you'll see after you open it and slice it, it is a true multi-color model that has different colors by layer, some colors (red, grey, yellow) will be on the same layer (this is also why its not a traditional Hue Forge, as Hue Forge colors are layered one after the other) with that said, be mindful that this took 7 different filaments to create and having at least 2 AMS systems would be preferrable. Sorry for the long ramble, I just wanted to put it all out there in case any questions come up while you try to print this. Also note, it took me 7 days to design and to get it to print properly so please look closely at the global and per object settings as I have everything dialed in to get it to come out as good as it did in the pictures. Hope you all enjoy making this one!