cagle1991

Madness3D

Organize your printer hotends and parts with this perfectly shaped gridfinity storage.&nbsp;You can store 4 hot ends and parts within a 2x2 gridfinity unit.&nbsp;There is seperate storage for:ExtruderscrewsMetal clipSilicone sockThermal paste&nbsp;Compatible with X1C / P1S and P1P hot ends&nbsp;&nbsp;The box has room for 6x2mm magnets (press fit) to securely fit within my gridfinity bases with magnets.Look up my gridfinity baseplates if you are in need of baseplates.

X1C / P1 Extruder storage - Gridfinity

STORAGE

ChunkAhoy

Organize your batteries with ONLY the slots for the batteries you actually need.This is a customizable battery storage system where you print the inserts you want.&nbsp;The system has a 3x3 grid of 69mm X 69mm offering endless possibilities that will sure meet your specific arrangement needs while limiting unused space.&nbsp;If there&#39;s a sort of battery you need and the insert is not available in the list, let me know in the comments and i&#39;ll try to make it for you.&nbsp;Current inserts are:&nbsp;186504SR449VAAAAACDCR123ACR1620CR2016CR2032CR2477SR41Empty 1x1Empty 1x0.5Empty 0.5x0.5&nbsp;&nbsp;Shout out to @RDesigns for making the external shell/box that contain the inserts. Saved me lots of time with the parametric model.Use raw PLA or PETG or ABS filament to secure the hinge and the clips.Use raw TPU in the seal slot.

Modular Battery Storage System

HOUSEHOLD

<h2>Milwaukee LED Light Box (V2) 💡📦</h2> It is recommended to print the BED CLEANER first!<a target="_blank" href="https://makerworld.com/en/models/78594#profileId-82864" rel="nofollow noopener">https://makerworld.com/en/models/78594#profileId-82864</a> ** USE PROVIDED PRINT PROFILES! THEY HAVESPECIFIC SETTINGS CHANGED TO CLOSE GAPSON FIRST LAYER! ** Drill hole in side or back panel (or cut in slicer) forLED strip light wire. Make sure print bed is CLEAN before printing. REMOVE PURGE LINE RIGHT WHEN THE PRINTSTARTS!! ** NOT FOR COMMERCIAL USE! **For commercial use license visit:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>  KIRSTY K (3DDirectk) on Etsy does NOT have permission to sell my designs!

Milwaukee Light Box Sign

signs

Ciuf_Ciuf

After completing the print, it will be necessary to gently fold the wings and the horizontal tail as shown in the photoIt&#39;s very simple and quick to print, with a total time of 18 minutesGreat recreational item if you have kids&nbsp;Have fun!

Indoor/Outdoor Airplane

games 

Mr.Jay

Jack Russel coasterSize 10cmCheck my other coasters for other breeds. You can <a target="_blank" href="https://makerworld.com/en/my/message?recvID=2093862659" rel="nofollow noopener">message</a> me to add a request.

Jack Russel Coaster

doggos

MakerJoe

Simple and easy AMS Helper System. The design attachs directly to the first stage feeders filament intake.&nbsp;Before you print:<ul><li>I´ve got feedback, that the size of the first stage feeder port varrys. If you have the larger Port than you should use the print profile for the larger one. (Larger means 3,1mm in height instead of 3mm)</li></ul>Advantages (i have noticed):<ul><li>No wear out of the grey filament intake port of the first stage feeder</li><li>Fixed filament retraction problem where the filament gets all over the AMS</li><li>Reduced horizontal stress on the first stage feeder</li><li>Fixed spool hopping when filament gets low</li></ul>Assembly:<ul><li>Just stick a PTFE tube into the clip and slide it on the first stage feeder.</li><li>Optional put a bit of glue in the hole before sticking the ptfe tube in to prevent slipping out</li></ul>Notes:<ul><li>I use 9cm long PTFE tubes. Maybe the optimal length is different… (Update 18.2: Trying 9cm tubes instead of 13 cm)</li><li>This helper should also work with the Hydra AMS System</li><li>Check also out my PTFE Tube Protector: <a target="_blank" href="https://makerworld.com/en/models/234268#profileId-250844" rel="nofollow noopener">https://makerworld.com/en/models/234268</a></li></ul>Installation on the AMS:<ul><li>Here you can see how to install the EZ AMS Helper on the AMS. Just slide it on, don´t try to mount it from the top.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/834356/2024-01-03_a8f165557c9eb.gif">

EZ AMS Helper

Bambu mods/parts

Cayden3D

This custom-designed flosser dispenser is right at home in any bathroom, kitchen, or dining room- keep those plackers handy! Print in PETG or ABS to keep one in the car!&nbsp;Keep the germs out and never be without a flosser with this awesome little dispenser! My design holds 22 Plackers brand flossers and is easily refillable via the self-securing lid. &nbsp;You’ll love using the compliant dispensing mechanism, and you can always keep an eye on how many flossers are left.&nbsp;**Note** specifically sized for: -Plackers Micro Mint -Plackers Twin-Line Flossers. -Plackers EcoChoice

Flosser Dispenser for Plackers

house hold stuff

3D Art

Here is a cool cover for the trailer hitch.Very nice gadget.Have fun with it.&nbsp;3D Art Printing Service

Towbar cover Caravan

josh

TomTom_90

Unfortunately the mount on my mobile jack doesn't fit my Tesla. There are extra “jackpads” for lifting, but they only lie loosely and were far too unstable for me. That's why I designed this adapter. The rubber mount of the jack fits exactly into the adapter and slipping is no longer possible. There is a suitable cutout at the top for the Tesla Jackpad. Works great for me. Printed in ABS with 100% infill.

Tesla Jackpad adapter for mobile jacks

Tesla

BrooklynBravest

Magnetic knob that clips onto milwaukee M12 cordless ratchet. Was modeled off of a 3/8" fuel m12 ratchet unknown if other milwaukee ratchets share same dimensions. Allows for easy direction changes especially when wearing gloves. &nbsp;Requires two, 6mm x 3mm neodymium magnets.

M12 Ratchet Direction Knob

Dylan tools

edzill

This is a remix of the model N3RD Solutions posted, so a big thank you to him for making the original.&nbsp;Single version: <a target="_blank" href="https://makerworld.com/en/models/146174#profileId-159144" rel="nofollow noopener">https://makerworld.com/en/models/146174#profileId-159144</a>&nbsp;Triple version: <a target="_blank" href="https://makerworld.com/en/models/146168#profileId-159136" rel="nofollow noopener">https://makerworld.com/en/models/146168#profileId-159136</a>&nbsp;This remix was created to fit the double switch I have in my bathroom where I thought this model would best fit. The changes made are the following:&nbsp;<ul><li>First the obvious - made the model compatible with a double-switch</li><li>Added a hollow back to better fit that hardware</li><li>Rounded the edges a bit to give it a more finished look</li><li>Deepened the screw holes to have a more flushed look</li></ul>I have added the 3mf file of the project that includes custom-painted supports as well as my model-specific tested support settings that make it relatively easy to take off with the printer clippers. Would appreciate any feedback as I'm a newbie designer.&nbsp;*Disclaimer* Normal switch covers are typically fire resistant while normal pla is not. You are responsible for your own safety as am I. The chances of an electrical fire are slim but never zero. Do what you will with that information.

Double Switch Cover Renaissance

lolz

BODY MECHANIC

Drain Cleaner

Drain Cleaner

Helpful Tools

TwinShepherdPrinting

I couldn't find a tool organizer for my print station that met my exact needs so I said “to hell with it” and made my own. includes inserts for IPA bottles, hand tools, scrapers, glue sticks and a “Catch All” tray at the bottom for random odds and ends.&nbsp;Including the Step file for those interested in changing the model to fit their own needs, I would love to see what some of Y'all come up with!&nbsp;Added a variant with horizontal caliper storage to the Raw files section for those interested.&nbsp;For those with a small form factor printer like the A1 mini o.Ojack did a great job making a smaller variant that fits on the mini build plate!<a target="_blank" href="https://makerworld.com/en/models/147182#profileId-160578" rel="nofollow noopener">https://makerworld.com/en/models/147182#profileId-160578</a>&nbsp;Some users have reported issues finding the caliper model files so I have created a separate post for that model. the files can still be found on under this models Raw Files drop down menu however for convenience and handy app ease of use the caliper model can be found here: <a target="_blank" href="https://makerworld.com/en/models/154289#profileId-168688" rel="nofollow noopener">https://makerworld.com/en/models/154289#profileId-168688</a>

Catch All Desk Organizer

Dylan

Jacklove

Joining the MakerWorld family for the first time, I am very happy to share my first model with everyone. I hope you like it and can also provide your opinions or suggestions on this model for my future improvement.

STORAGE

HOUSEHOLD

signs

games

doggos

Bambu mods/parts

house hold stuff

josh

Tesla

Dylan tools

lolz

Helpful Tools

Dylan

Liz