Byteman

Lov3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0 PLA+ Sunlu Red Transmission Distance: 18 PLA+ IIID Max Light Blue Transmission Distance: 6 PLA+ Sunlu White Transmission Distance: 11&nbsp;Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Light Blue At layer #20 (1.68mm) swap to White for the rest.

Iron man  ART Graffiti (HueForge)

Hueforge

BPmakesthings

Nice improvement on my previous low poly cat model. Made in Blender.&nbsp;Commercial Use: <a target="_blank" href="https://cults3d.com/:1308071" rel="nofollow noopener">https://cults3d.com/:1308071</a>&nbsp;

Low Poly Cat (No supports)

Animals

Meister Edel

Update 10.02.2023:I remixed the rotor with the toroidal design :) Feel free to test ist out!<a target="_blank" href="https://makerworld.com/de/models/54749#profileId-56494" rel="nofollow noopener">https://makerworld.com/de/models/54749#profileId-56494</a>In addition, there are now many other great remixed propellers from other users. You can find them connected to this print or my toroidal propeller.<figure class="image image_resized image-style-align-center" style="width:65.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2d7kbimuo75c.jpg"></figure>&nbsp;HiRecently my son came home very sad because a friend had such a fancy flying propeller from the 1€ shop.Of course I had to sit down directly at the computer and after the first prototype was already well working I designed an improved version.This toy should be very stable and last a long time! Also, it's very easy to use and grab for the smaller ones among us!Put the pulling rod in the place marked by the arrows. Otherwise the propeller wants to fly downwards. Have fun! :) Note: The prop will fly long distances/ very high. So better use it in a place without trees and no obstacles. Hold the Toy away from the face! - otherwise the propeller will fly into it :D&nbsp;Print instructions/ tipps:<ul><li>Axis: Print the axis with at least 3-4 perimeters!</li><li>Propeller: Print the propeller with a not too brittle material! (I used tough PLA or even better: Nylon + Carbon Filament) - Low infill: The lighter the better ,-) I also tried TPU. It works but if you pull too hard it may deform too much and cause a malfunction. The lower you choose the layer hight the less friction the prop will cause. (I printed in 0,15mm)</li><li>Gear & Bearings: Use filament that can withstand kinda low tolerances. PLA will do the job. If you have a seam cut it off after printing. To avoid a bad surface dont "fill the gaps".</li><li>Pulling rod: Print the Classic+ Rod with 3 Perimeter.</li><li>It is possible to separate the file into parts with your slicer ,)</li><li>I also like to break the corners of all parts by scraping over these areas with a knife. That makes the action smooth and gives a good handfeel :)</li><li>Power of Scaling: If you have difficulties inserting the axis you may reprint it scaled down a little. If it is too loose scale it up a little so it fits tight enough.</li><li>It is not necessary but I lubricated all mechanical pieces with some paraffin wax. A drop of Oil will do the job too but may be messy.</li><li>You can print all parts without support and put the parts together very easy.</li></ul>Attention: Don't use damaged Propeller!! A disbalance in the Rotation might destroy the Propeller and parts could fly Off. Especially with brital Material Like PLA.  New Mechanics Update: This is the right way to assemble the toy!<figure class="media"><div data-oembed-url="https://youtu.be/0pYzTrsRqqw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0pYzTrsRqqw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Since the design optimazion of the internal mechanics there is no glue needed at all!  &nbsp;I have also provided other beautiful designs for kids for free. For example, my latest is the ocarina to make music!<a target="_blank" href="https://makerworld.com/de/models/54693#profileId-58010" rel="nofollow noopener">https://makerworld.com/de/models/54693#profileId-58010</a>&nbsp;<figure class="image image_resized image-style-align-center" style="width:74.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2xl9blerr9l5.jpg"></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=WfEfctJU70o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WfEfctJU70o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;To get the most strength out of the pulling rods locate the seam to this location: (It is possible with the Prusa Slicer for example)<figure class="image image_resized" style="width:61.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_yj4redoaa581.png"></figure>&nbsp;Remix CultureI think this simple design is very open for you to bring in your designs too! So be invited to create even better propellers! (I uploaded the .step file of the core piece. [mm])&nbsp;<figure class="image image_resized image-style-align-center" style="width:66.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_sxifu6dn5if0.jpg"></figure>&nbsp;&nbsp;&nbsp;Update 06.07.2022Added a new (hopefully) more aerodynamik prop. This one flies even higher!(Added in standard download & single)Update 28.05.2023Increased the strength of the prop a little by adding a radius connecting the wings with the outer ring.Update 23.02.2023: NEW PULLING RODS! Some had proplems with a breaking pulling Rod. So I beefed up the old one (Classic+) and also designed 2 totaly new ones (Ergonomic & Hook). For the Ergonomic one you will need a M3 x 20+ Screw for assembling. I tested all with PLA in the local kindergarten and they withstand even rough abuse :PUpdate 27.09.2023: Due to different manufacturing tolerances the press fit does not always work directly (scaling the axle can work wonders) I have slightly reworked the inner mechanics. I'm happy about any short feedback on the new design!&nbsp;&nbsp;If you like my work I would be very happy if you share it with others and leave a like :)

Strong Flying Propeller / Pull Copter (No Supports)

LoliBagGifts

Valeria Momo

Are you ready for the invasion of these cute T-Rex? 🦖🦖🦖 I printed this family and now I will print an army to hide in the house.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000389525/design/2023-11-19_c8d27404379f3.png"></figure><h2>Scaling</h2>I printed at 100% (40mm height), 87% (35mm height) and 80% (32mm height) and everything was perfect. Maybe you can scale even smaller but you lose details. Feel free to increase the size of the object!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000389525/design/2023-11-19_c8d27404379f3.png"></figure><h2>Print settings &amp; post-print suggestions</h2>Brim is enabled but if you have excellent adhesion to the print bed, you can disable it. If you decide to keep it enabled, you will have to remove the brim after printing: I use this <a target="_blank" href="https://it.aliexpress.com/item/1005006552474389.html?spm=a2g0o.productlist.main.35.d6f1hLY6hLY6Jp&amp;algo_pvid=5cf3b9ee-a052-40c3-b2f9-6e46738c3fda&amp;aem_p4p_detail=202403220612465209195050748030000902062&amp;algo_exp_id=5cf3b9ee-a052-40c3-b2f9-6e46738c3fda-17&amp;pdp_npi=4%40dis%21EUR%219.48%210.46%21%21%2172.74%213.55%21%40211b600217111131663054582e5f0d%2112000037648909320%21sea%21IT%210%21AB&amp;curPageLogUid=6cJ90mwikRgO&amp;utparam-url=scene%3Asearch%7Cquery_from%3A&amp;search_p4p_id=202403220612465209195050748030000902062_18" rel="nofollow noopener">tool </a>which makes the task easier and precise. If you notice the object becoming discolored where the brim was present, a brief burst from a hair dryer or heat gun can help re-melt the filament just enough to restore its original color. Be careful not to overheat, as this can cause the strands to melt together, resulting in a messy outcome.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000389525/design/2023-11-19_c8d27404379f3.png"></figure><h2>Commercial license</h2>Do you want to sell prints of my models? You can purchase commercial licensing <a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener">by joining the Commercial License in my Patreon</a>.

Baby TRex Family T-Rex Dinosaur Cute

KeyframeMaker

<h3>👨🏻💻这个文件被举报。商家，我不知道你是怎么想的～！？</h3><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135527/design/2024-04-07_8825851c34606.png"><h3>🤯写在前面：</h3>我一度想将这个文件的源文件删除掉。这样会清静很多，自己做自己玩。但我的相信这个世界是美好的人比丑陋的人多。毕竟分享的出发点是，节省大家的时间。通过这个能知道小丑和他的同类挺好的。所以，请大家遵循开源的规则 CC BY-NC-SA 4.0 DEED。祝你玩得开心。&nbsp;小丑，请不要作为商业用途。如果你硬要作为商业用途，它只是一个盒子而已，你发不了财。但正义的人们会看清楚你，仅此而已。同时也会看清楚你的同类：）&nbsp;<h3>🤦🏻为什么开放源文件且不做任何标记</h3>我目前只玩i-type，和Square。我相信其他尺寸的爱好者，也可能需要用。我相信想要改的人，大概率是不想看到任何标记的。&nbsp;<h3>📙文件：已经删除了。不在开源源文件。Stl还在。</h3><h3>曝光小丑吧</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135527/design/2024-05-22_5236fb8cb2e72.jpeg"></figure>------------------<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135527/design/2024-05-22_9f823d4cef996.jpeg"></figure>&nbsp;&nbsp;&nbsp;

宝丽来相纸保护盒

Film

Conrad Jun

<blockquote><h3>非常抱歉这个版本来的非常的晚，有很多人有双控制器，所以我制作了V3，V4两个版本，希望大家喜欢。</h3><h3>为了节省耗材，我对模型进行了4.5mm的抽壳，可以选择喜欢的版本打印。</h3>I apologize for the late release of this version. Many people have dual controllers, so I&#39;ve created versions V3 and V4. I hope everyone will like them.In order to save on filament, I hollowed out the model by 4.5mm. You can choose your preferred version for printing.</blockquote><figure class="table" style="width: 98.43%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><th>V2</th><td>（Single Controller）这个版本是单手柄版本</td><td>链接：<a target="_blank" href="https://makerworld.com/zh/models/20025#profileId-18608" rel="nofollow noopener">https://makerworld.com/zh/models/20025#profileId-18608</a></td></tr><tr><th>V3</th><td>（Double Controller）这个版本是双手柄版本</td><td>链接：<a target="_blank" href="https://makerworld.com/zh/models/471652#profileId-381308" rel="nofollow noopener">https://makerworld.com/zh/models/471652#profileId-381308</a></td></tr><tr><th>V4</th><td>（Double Controller）这个版本是双手柄版本</td><td>链接：<a target="_blank" href="https://makerworld.com/zh/models/471672#profileId-381334" rel="nofollow noopener">https://makerworld.com/zh/models/471672#profileId-381334</a></td></tr></tbody></table></figure>&nbsp;<h3>我重新设计了v2版本，使其更加圆润、时尚。</h3><h4>产品介绍：</h4>大家好！我很高兴与您分享我的 PS5 控制器 3D 打印支架设计。该支架非常适合存放和展示您的 PS5 控制器，让您的游戏空间保持整洁有序。它采用独特的几何形状设计，使展台既美观又实用。提供后部支撑的能力已得到增强并经过广泛测试，以确保其完全稳定且不会翻倒。&nbsp;<h4>设计和印刷细节：</h4>设计工具：Fusion 360打印机：Bambu Lab X1材质：Bambu PLA 哑光层高：0.2mm填充率：15%支持： 无需支持打印时间：约3小时该支架的设计考虑了简约和时尚，提供了易于打印的坚固结构。只需使用 Bambu Lab X1 3D 打印机和 Bambu PLA Matte 材料，即可打印层高 0.2mm 和 15% 填充的打印，无需支撑结构。打印时间约为3小时。

PS5 DualSense 控制器支架 V2（有LOGO）

Game

Libb_s

Stackable box 100x 160x 63mm

Home

KYZ Design

Update 04/03/2024 - License changed from “Standard Digital File License” to “CC-BY-NC-SA”. Multi-body STP file uploaded. Oh yeah, I over-engineered the hell out of this one! I went through more than 12 iterations and I think this is going to be my final version. The main challenge was designing outer walls that print without a million retractions so I didn’t want to just put regular holes and slots around the perimeter. These cheese grater looking holes are opened up both towards the inside and outside in alternating patterns creating quite large vent areas. Each section has a single line of extrusion per layer so it prints fast and isn’t too torturous for all 4 motors.&nbsp;I printed mine in clear polycarbonate and it was super easy because there aren’t any long straight walls that cause warping. ASA would also be a good choice but I chose polycarbonate so I can see the colour of the indicating desiccant without opening the canister.&nbsp;Design Objectives:<ul><li>Large vented surface area, even when installed into a spool, for quick drying of enclosed airspaces</li><li>Multiple cross-flow air paths for quick drying of desiccant without removal of the desiccant beads from the container</li><li>Design primarily for the Bambu reusable spools and sits flush with the sides of the spools. (However, as different manufacturers are converging on a more "standard" spool size thanks to the AMS, these should fit some other spool brands)</li><li>Work as a Bambu reusable spool's "spool shim" to prevent the spool pieces separating</li><li>Fast print, minimise filament retractions when printing vents on vertical walls</li><li>Strong and sturdy to last a long time - no vase mode</li><li>Desiccant cannot fall out when moving the holder between spools</li></ul>&nbsp;Print material:<ul><li>OK to use PLA if you don't plan on drying the desiccant inside the canisters</li><li>PETG recommended as a minimum if you want to dry the desiccant gently without removing them from the canisters</li><li>ASA/ABS/PC recommended</li></ul>Print settings:<ul><li>For Bambu users: print from the app.<ul><li>Feel free to add print profiles here if you changed something and think it may be useful to others.</li></ul></li><li>For those who are getting the STLs and slicing it yourself:<ul><li>Import the “cap” and “cap mesh" together and put them in an assembly to keep them aligned</li><li>Likewise, import the “body" and “body mesh" together and put them in an assembly to keep them aligned</li><li>The mesh parts should have no walls, no top, no bottom and 50-60% triangular infill (or as you see fit)</li><li>Use 3 walls for all parts, 3 layers for the bottom, 4 layers for the top</li><li>Layer height as you see fit (I use 0.20m)</li><li>Even if you have a fast printer, slow down the outer wall speed for part durability and consistency in gloss level (I use 50mm/s)</li><li>ARACHNE WALL GENERATOR MUST BE ON!</li><li>The preview should look something like below:</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/633232/2024-02-11_f252a48fe100d.png"></li><li><img src="https://makerworld.bblmw.com/makerworld/draft/633232/2024-02-11_b2309d4cdaeda.png"></li></ul></li></ul>Spool Compatibility<ul><li>These work well with Bambu spools and eSun cardboard spools.</li><li>For eSun plastic spools, you will need to turn the retainer around for a tighter fit (these spools are getting phased out anyways).</li><li>Please check out the comments and makes as they come through - on this page and on Printables - as users post these with their spools - I've seen one already fitted on a Polymaker cardboard spool.</li><li>Sorry these are not compatible with Prusament spools but <a target="_blank" href="https://makerworld.com/en/models/23470" rel="nofollow noopener">this one</a> works with them.</li></ul>Fitment<ul><li>Overall, it's important to have your pressure advance (k value) tuned so that the seams don't bulge out and make it harder to thread parts together.</li><li>The cap is designed to fit very tightly. If you print from PLA, you might find that it threads in really easy but if you print from PETG (which has higher friction and generally doesn't print as cleanly), it is a bit hard on your fingernails to thread in. This is to ensure the cap doesn't come off and spill all the beans during use. I have included a cap installer/remover to make it a bit easier on your fingers.<ul><li>Unfortunately, even with all the settings and printer dialed in properly, variations in filament batch may create fitment issues. It's not necessarily your fault - don't be disheartened by seeing 99% of users say it's perfect but yours isn't! Measure your filament diameter. Sometimes it can be 1.72mm, sometimes 1.78mm - the latter will make the fit tighter. Either reprint just the cap in a different filament, a different section of the same roll, or scale it down slightly. (Another user has already created print profiles for easier fitting parts!)</li></ul></li><li>The retainer has been designed with a larger clearance than the cap so it should thread in nicely. However, the thread pitch is quite fine because it's designed to fit tightly to the spool so it stays on in the AMS with the constant winding and unwinding. This can, with some spools, make it difficult to remove. User @urzhiataer has made a <a target="_blank" href="https://makerworld.com/en/models/190462" rel="nofollow noopener">tool to help remove the retainer</a>, check it out!</li></ul><figure class="image image_resized" style="width:45.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/633232/2024-02-18_246b3e25e48f28.png"><figcaption>Retainer removing tool by @urzhiataer</figcaption></figure>&nbsp;That's all, enjoy!&nbsp;Wait two more things: print this <a target="_blank" href="https://makerworld.com/en/models/73654" rel="nofollow noopener">canister holder</a> to dry 7 of them at once in your filament dryer:<figure class="image image_resized" style="width:75.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/633232/2024-02-14_f3628eb848943.png"><figcaption>Desiccant Dryer Ferris Wheel</figcaption></figure>And if you have lots of little fragments of desiccant because you microwaved them on high, perhaps try out this <a target="_blank" href="https://makerworld.com/en/models/190762" rel="nofollow noopener">filter scoop</a>:&nbsp;<figure class="image image_resized" style="width:68.31%;"><img src="https://makerworld.bblmw.com/makerworld/draft/633232/2024-02-18_0f2082378d3f8.jpg"><figcaption>Filter Scoop</figcaption></figure>

KYZ FF2 High Flow Desiccant Holder - For Bambu and Other Spools

3D Printer Accessories

3DMDesign

Meet Binky, an adorable 3D model of a bunny holding an Easter egg. With his big expressive eyes and cute pink snout, Binky is the epitome of childlike innocence and joy. He is perfect as a decoration during the Easter season.