byCosta

3DPrintNovesia

A supportless version from my FIFA Worldcup Trophy Design

Supportless FIFA WorldCup Trophy

Trophy 

GCdesign3D

<h3>If you enjoy my work, leaving a BOOST would mean a lot!</h3><h3>Every contribution helps me refine my designs and create new projects</h3><h2> </h2><h2>Introducing the Beach Towel Clip - Your Best Beach Friend</h2>Keep your beach towel securely in place with this innovative Beach Towel Clip. Designed to withstand the windy conditions at the beach, this handy clip ensures your towel stays put, so you can relax and enjoy your time by the sea without constant adjustments.Features:<ol><li>Secure Hold: Our Beach Towel Clip provides a firm grip to keep your towel anchored to the sand, preventing it from flying away in the wind.</li><li>Easy to Use: The simple design makes it easy to attach and remove, saving you time and effort when setting up your spot on the beach.</li><li>Compact and Portable: Lightweight and compact, the Beach Towel Clip is easy to pack in your beach bag, making it a convenient addition to your beach essentials.</li><li>Versatile Application: Perfect for beach towels, picnic blankets, and even lightweight beach mats, this clip is versatile enough for various outdoor activities.</li></ol>Enjoy a stress-free day at the beach with this reliable Beach Towel Clip. Keep your towel in place and focus on what really matters – soaking up the sun and enjoying the waves! <h3>For the creation of this model I was inspired by the real one, plus I added some grooves on the side to prevent it from detaching from the beach.</h3><h3>Recommended Materials:</h3>you can use any material you want, i suggest petg or pla+&nbsp;<h3>Print Mode:</h3>Use my provided .m3f template if possible (on print profile choose the one that says &#34;DESIGNER&#34;). This model is already configured for best printing results.&nbsp;<h3>Orientation and Support:</h3>The object can be printed entirely on a single plate on all printers, just choose the correct print profile that fit your printer. This model does not need supports.&nbsp;<h3>Dimension: </h3>145mm x 84mm&nbsp;&nbsp;I hope you find this design enjoyable to print! Your feedback helps me improve this design even more. Feel free to share your thoughts below, enabling me to enhance it even further! 😊✨&nbsp;&nbsp; Check out my other designs by clicking into my profile, here are some examples:<ul><li><a target="_blank" href="https://makerworld.com/en/models/223227#profileId-241227" rel="nofollow noopener">Tiny Bookmarks Kit Card</a></li></ul><a target="_blank" href="https://makerworld.com/en/models/223227#profileId-241227" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484540/design/2024-03-04_c6a4c48eb1b28.gif"></a><ul><li><a target="_blank" href="https://makerworld.com/en/models/201327#profileId-221704" rel="nofollow noopener">Customizable Sd / Micro Sd Card Kit</a></li></ul><a target="_blank" href="https://makerworld.com/en/models/201327#profileId-221704" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484540/design/2024-02-25_b7604b4f97ccc.gif"></a>

Beach towel Clip FOR GRIP ON SAND

Beach

My first self-made sandal. Printed in Men&#39;s size 43 for use with any standard footbed. (But it also works without if necessary.) The pair of sandals costs less than €7.50 (plus electricity) at a TPU price of €25/kg. The filament I use is standard TPU 95A or high speed TPU&nbsp;I have added a conversion table as a picture.If you are unsure about the size, print a version in cheap PLA first and test whether the size fits.  That&#39;s what I did.The straps can be adapted to your own Foot height and glued on accordingly.I use cyanoacrylate superglue that is waterproof and achieves excellent results.  (Cyanoacrylate adhesive is the best for bonding TPU)&nbsp;Here are a few tips:<ul><li>Don&#39;t fasten the straps too tightly. Then they can become uncomfortable. It is best to wear thick socks when attaching them. </li><li>The high speed filament feels harder than the standard TPU. This makes the sandals slippery at first on smooth ground. I took them for a walk outside and afterwards the grip was normal again.</li><li>The Tynmorry Standart TPU feels more comfortable than the Overture HS TPU</li><li>Alternatively, you can use PU artificial leather for the straps. This is softer, but will stretch a little over time.</li><li>The sandals are designed for over 100 kg.  For lighter people, I recommend reducing the infill and lowering the number of upper layers. Perhaps first make a 1 cm thick test print with the selected filament.</li><li>I recommend gluing the strips to the outside first and then attaching them to the inside. Any excess can easily be cut off afterwards.</li></ul>The sandal is still under development. I want to continue to improve the comfort and convenience and ultimately release a good, wearable and affordable shoe.I hope you have fun with the slippers, please write me your experiences and suggestions for improvement.&nbsp;- In the current version, I have reduced the infill to 11% and rounded off the edges of the belts.&nbsp;

3d printed ergonomic sandal

Shoes

standitupstore

The famous Robert Planter

Mothers Day Pot - Mother and Child

Mother's Day

RA3D

Box Dia do Pai

Box Dia do Pai

Father's Day

Fritz025

Overview&nbsp;This greeting card is perfect for anyone, no matter the age. They can simply pick their right numbers from the kit card and together with the other parts, assemble a neat little birthday cake. For single digit birthdays a “0” can be added first or any of the other decor options, like the pearls or the flag. One single cake slice can also be detached to expose the inner filling.&nbsp;&nbsp;Profiles<ul><li>Kit-Card for AMS with 4 colours (Birthday_Cake_Kit_V1.3mf)</li><li>Kit-Card with 1 colour (Birthday_Cake_Kit_V1_Blanco)</li><li>Kit-Card Tolerance Test (Birthday_Cake_Kit_Tolerance_Test)</li></ul>&nbsp;&nbsp;Filament<ul><li>Bambu Lab PLA Basic Jade White</li><li>SUNLU PLA colour wood</li><li>SUNLU PLA+ candy colour series pla+ sky blue</li><li>Bambu Lab PLA Basic Red</li></ul>&nbsp;&nbsp;Tips<ul><li>The Model requires close tolerances to ensure snug but not tight or loose fit</li><li>A print profile with some test pieces is provided (Adjust your X-Y hole compensation if needed as show <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">HERE</a>)</li><li>Ensure the filament is properly calibrated with no excessive overextrusion</li><li>Make sure the kit card cools off first, for easier removal from the build plate and to avoid any parts breaking off too soon</li></ul>&nbsp;&nbsp;Assembly<ul><li>Remove the needed numbers and cake pieces from the kit card</li><li>Debur as needed to ensure a perfect fit</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618866/2024-02-28_94a1a86e3bdc4.png"></figure>&nbsp;&nbsp;Note: Please make sure to do the Tolerance Test (Birthday_Cake_Kit_Tolerance_Test) to avoid any unpleasant birthday surprises.&nbsp;Happy Celebrations!&nbsp;

Happy Birthday Kit Card | Cake

Birthday

bdwilson

<h2>Summary</h2>Needed a dog poop holder with a bigger hole to connect to my existing dog poop roll. Also large enough to fit a carabiner. To use, tie a knot in your poop bag and put the knot into the larger hole and pull it down through the slot. Large enough to hold several poops before emptying! &nbsp;NOTE: The above picture is it printed at 60%. I have included 55, 60 and 65% sizes, but I do find the 60% one to work best for me.&nbsp;

Dog Poop Bag Holder

fcl82

Barbie gymnastics balance beam toy

Barbie Olympics - Balance Beam

Gymnastics

AU3D

I recently adorned my twins' bedroom with these unique letters, adding a personal touch that's both practical and charming. I chose Silk-PLA for printing the letters, and the results were fantastic. For a distinctive textured finish, I placed all the letters upside down on my texture PEI sheet. This not only enhanced their appearance but also added a creative flair to their room.&nbsp;I have made available two size options for these letters - 18cm and 12cm, indicating their intended height. However, due to the specific font style I used, there's a minor variation in height, with a difference of a few millimeters per letter. Notably, the 12cm variant is conveniently designed to be printable on an A1 Mini printer, ensuring accessibility for those with smaller printing capabilities.&nbsp;I utilized UHU patafix (<a target="_blank" href="https://amzn.to/3RLtx0q" rel="nofollow noopener">Link</a>*) to affix the letters to the wall, which proved to be an effective method.&nbsp;The <a target="_blank" href="https://makerworld.com/en/models/64897" rel="nofollow noopener">stars in the images can be found here</a>.The <a target="_blank" href="https://makerworld.com/en/models/124457" rel="nofollow noopener">crown in the images can be found here</a>.&nbsp;* affiliate link

Children's Room Wall Decoration: Letters (A-Z)

Newborn

DesignCraft

A collection of kitchen and bathroom drain strainers, stoppers, and drain pads. Useful for kitchen sinks, bathroom sinks, utility sinks, bathtubs, and probably more!&nbsp;Before printing, please review the list of models and their respective measurements followed by some additional notes.&nbsp;General Notes:<ul><li>The only model that requires support is Part 4 (sink_stopper_4_fin) of the Bathroom Sink Drain Stopper (Experimental).</li><li>No brim is necessary for any of these models.</li><li>Concentric or Archimedean Chords for top and bottom surface patterns works well for many of these models as they're circular.</li></ul>&nbsp;Kitchen Sink Drain Strainer<ul><li>111.5mm outer diameter</li><li>66mm basket diameter</li><li>32.6mm basket depth</li></ul>Voronoi Kitchen Sink Drain Strainer (Experimental)<ul><li>111.5mm outer diameter</li><li>68mm basket diameter</li><li>36.3mm basket depth</li></ul>Utility Sink Drain Strainer<ul><li>72mm outer diameter</li><li>42.6mm basket diameter</li><li>25mm basket depth</li></ul>Bathroom Sink Drain Strainer<ul><li>33mm top diameter</li><li>26mm basket diameter</li><li>51mm height</li></ul>Bathroom Sink Drain Stopper (Experimental)<ul><li>33mm top diameter</li><li>28mm shaft diameter</li><li>130mm height</li><li>The ring (part 5) must be printed in TPU filament (or similar)</li></ul>Large Drain Stopper Pad<ul><li>150mm diameter</li><li>TPU filament (or similar)</li><li>Engineering plate (or similar smooth built plate)</li></ul>Medium Drain Stopper Pad<ul><li>100mm diameter</li><li>TPU filament (or similar)</li><li>Engineering plate (or similar smooth built plate)</li></ul>Small Drain Stopper Pad<ul><li>50mm diameter</li><li>TPU filament (or similar)</li><li>Engineering plate (or similar smooth built plate)</li></ul>&nbsp;Instructions for the Bathroom Sink Drain Stopper (Experimental)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159522/2023-10-11_8aa9334ebbc7a.png"></figure><ol><li>Insert 2 into 1. Try pushing the teeth of 2 together and then coming in at a top down angle into 1. Then slide the teeth down and when you reach the circle, lift the center of 2 to lock in place.</li><li>Slide 3 into 1 (on top of 2) while pushing down on 2's circle tab which will lock into 3's circle.</li><li>Slide in 4 on the opposite side.</li><li>Pinch 5 to get it around 6. Pull down one side of the ring (5) until it pops into place. This is best done on the wide sides of 6. Then do the same on the opposite side to fully pop in the ring (5).</li><li>Slide 6 sideways into the notch at the top of 2.</li></ol>&nbsp;My TPU SettingsI know this may help some people so I'm including the slicer settings I use for TPU.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159522/2023-10-11_23495439f19ba.png"></figure>

Kitchen & Bathroom Sink Drain Strainers, Stoppers, Pads

Bathroom

FiBaLi

ServusA beautiful lamp, very easy to print and fit for each LED lamp, whether with batteries or with cable. Simply for assembling everything is screwed together. Just great. For the cable, an extra output in the base of the lamp. The illuminant is simply with a double -sided adhesive tape or superglue on the ceiling from the cover and it is ready. Share it with friends and Famillie let a comment and thumb up.

Modern Lamp

Lamp

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

Office

hlrcreations

Print at 100% infill and 2 walls with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Bambu Basic black Transmission Distance: 0.6 Bambu Basic simble green Transmission Distance: 8 Bambu Matt Dark Brown Transmission Distance: 2 Bambu Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Green At layer #13 (1.12mm) swap to Brown At layer #16 (1.36mm) swap to White &nbsp;

Tree of life (Hueforge)

Hueforge

Yedoggie

A perfect representation of your love between your partner and yourself. Printed on 2 plates. Love plate needs minor support. Infinite Plate is printed face down and the letters are customizable on Bambu Slicer. Click on objects on the left hand side and select the object you want to customize. Then right click it to edit. You will be able to move the letters to where you want to have it located and re-size to you preference. Let me know if you. To make it easier, you can use the rotate button to rotate 180 to make it easier to edit. I do recommend printing this face down when your ready to print to avoid supports.

Custom Infinite Love Sign 

Valentine

Exotech

<h2>Beschreibung</h2><a target="_blank" href="https://files.printables.com/media/prints/582465/pdfs/582465-magsafe-charger-stand-for-iphone-998fdd66-1ada-48be-9a05-88558ef0df1f.pdf" rel="nofollow noopener">PDF</a>Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. <h4>Idea</h4>Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy mode for iOS. I wanted to create the most simple, easy to use and print stand for the magsafe charger and the iPhone.<h4>Two versions</h4>Because I love to have the choice, I created two versions :<ul><li>All in one, single piece, ready to be printed in place with no supports and no brim.</li><li>Split version where the base and the head are separate and held together by a screw, allowing you to choose two materials etc. Also easy to print, with recommended brim only for head and screw.</li></ul><h4>Printing instructions</h4>I recommend printing at 0.2mm, as is. It was specially designed to work without supports.For the split version, I recommend adding a brim for stability for the head and the screw.<img src="https://media.printables.com/media/prints/582465/rich_content/e038f599-b648-4cd8-9eb8-d1368cd9b203/image.png"><img src="https://media.printables.com/media/prints/582465/rich_content/add2c07c-6a12-4cc5-8f6e-fdfaa9722e9e/thumbs/cover/800x661/png/image.webp">

Magsafe charger stand for iPhone 15/14/13/12

Phone

Stefan Heer

Easy to print.I recommend a small support direct underneath the egg.I printed the legs with orange pla and topped it with white.Hope you like it.<h3> </h3>

Easter Egg Earring

Easter

JamesThePrinter

This roll top box includes 2 optional containers that mount to each side. If you choose to add one or two side containers, a connector will be needed for each. Both side containers can be used on either side of the roll top box.&nbsp;<h5>Print Settings</h5>No special settings are needed. &nbsp;<h5>Assembly Instructions</h5>Slide the roller into the groove on one of the roll top box pieces. Add a small amount of glue in the 2 holes and the slot of the right piece. Slide the left and right pieces together - be sure that the roller seats into the groove.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-15_8gzvx9mj3zyy.png"></figure>***Optional***Slide connectors into each side of the roll top box. If desired, glue in place.Slide the side containers in place.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-15_tkc0c75jkgtm.png"></figure>&nbsp;&nbsp;<a href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Inland Lulz Green Matte PLA</li><li>Inland Blue Tough PLA</li><li>Inland Pink Tough PLA</li></ul>

Roll Top Storage

Meister Edel

Here I have three slightly different Cabinet Hanger inserts for you.Instructions:First you need to drill a 20 mm wide and 9 mm deep hole to put them into.Then you push (or screw) in the Inserts.After that step you can use a 3 mm screw to lock the hanger in place.Then use sth. like a 4 or 4,5 mm Screw as a counterpiece to hang your project on to.Sth. about the three different versions:Springy: Slightly overengineered: Idea is to have more even tension.Spiky: Barbs to generate more friction.Twisty: Screw the Insert into place with the Key (included in the .stl). With Twisty it is necessary to drill the 20 mm perfectly to the desired depth. Otherwise it is hard to align it correctly.If you have any questions don't hesitate and feel free to post them in the comments.Have fun and keep printin!&nbsp;

Cabinet hanger Keyhole Hanger Invisible Wall Hanger 20 mm

Parts

manuelbonetto.10

VERY VERY SIMPLE AND FAST TO PRINT, YOU WILL FIND DIFFERENT STL FILES READY TO BE PRINTED WITH DIFFERENT DIAMETERS FOR EVERY FINGERPRINT SETTING<ul><li>Nozzle Size: 0,4mm</li><li>Layer Height: 0.2/0,1mm(personally I suggest to print at 0.1 layer height for a better aesthetic result) </li><li>Vertical Shells: 2</li><li>Top/Bottom Layer: 4</li><li>Infill: 10%</li></ul>IF YOU WANT YOU CAN INSERT VARIOUS COLOR CHANGES TO HAVE A BETTER AESTHETIC

LOW POLY RING

Jewelry

Tridense

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a href="https://www.buymeacoffee.com/Tridense" rel="nofollow">https://www.buymeacoffee.com/Tridense</a> </h4>Clip it on to your doors sidepocket or onto the pocket on the back of your seat!Volume of 2 liters (67.5fl.oz.)Insert a small plastic bag to easily empty the canPrint the flipper lid 100% infill, important for balancing the pivotAll the parts are pre-oriented for printability, I used tree supports on all the parts and kept the treshold angle at 29 degrees.<figure class="image image_resized" style="width:50%;"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/66866/2023-09-22_kt765tldam9a.jpg"></figure><figure class="image image_resized" style="width:50%;"></figure>&nbsp;<h4>Changelog:</h4>2023.09.12: Added a little curve on the hook to make it a little bit more secure (Bin v2)

Car Trash Can

wojteq5

Very fast and saves material printing of glasses (under 15 mins). You can do tons of it just right before party and give it to friends :) After party just thow it to trash - its cost you pennies ;) Enjoy

2024 new year glasses! (under 15 min)

New Year

Driest

easy and fun to make doorbell frame. doorbell cutout is for ring doorbell, but is very easy to scale to your own doorbell size by changing the X and Y size of the cutout (see assembly guide). i suggest making the cutout tight, so it will barely fit but will also stay in place after fitting.&nbsp;the print is AMS and non AMS friendly. simply choose the corresponding .3mf file:<ul><li>AMS version needs 2 colors, black for 1st color white for second</li><li>non AMS version has a pause at layer 13. start with black and change to white at pause</li></ul>

doorbell frame, easily scalable to doorbell size. easy multicolor without AMS

Halloween

make3dtc

<h2>Tic Tac Toe V2 Improved connector / Verbesserter Verbinder</h2><a target="_blank" href="https://makerworld.com/de/models/103942#profileId-110926" rel="nofollow noopener">https://makerworld.com/de/models/103942#profileId-110926</a>&nbsp;&nbsp;&nbsp;Tic Tac ToeThe game for on the go.Or for home.You can always play Tic Tac Toe and it's always fun&nbsp;&nbsp;&nbsp;Tic Tac ToeDas Spiel für unterwegs.Oder für zuhause.Tic Tac Toe kann man immer Spielen und es macht immer wieder Spaß

Tic Tac Toe

Games

Benjamin Kott

<h3>Organizer Box (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;<figure class="media"><oembed url="https://youtu.be/_2nHOIhereM"></oembed></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Punchhole Diameter</li><li>Punchhole Spacing</li><li>Corner Radius</li><li>Save space on the top and bottom</li></ul><h3>Customizing Tips:</h3><ol><li>If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.</li><li>If you adjust the corner radius, ensure that the desired size fits your desired width and length.</li><li>If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.</li></ol><h3>Why another box model?</h3>There are a lot of box models already available, but all I found were static,or have features or design aspects that did not fit my needs.&nbsp;I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates:</h3><ul><li>30.06.2024<ul><li>Added 18x14x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-434003" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-434003</a> </li><li>Added 18x14x10cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-434006" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-434006</a> </li></ul></li><li>20.02.2024<ul><li>Added 20x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214791" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214791</a></li><li>Added 10x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214795" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214795</a></li><li>Added 15x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214801" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214801</a></li></ul></li><li>01.01.2024<ul><li>Added 2 new cylindric versions<ul><li>10x10x13cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126695" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126695</a></li><li>8x8x10cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126713" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126713</a></li></ul></li><li>Changed extrusion for the holes in the Fusion 360 model</li></ul></li><li>24.12.2023<ul><li>Fixed baseplate calculation in the Fusion 360 model</li></ul></li></ul><h3>More Fusion 360 Parameterized Models</h3><ul><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td style="width: 50%"><figure class="image"><a href="https://makerworld.com/en/models/114250" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000103266/design/2024-03-23_519e073d57512.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">Stackable Storage Boxes</a></td><td style="width: 50%"><figure class="image"><a href="https://makerworld.com/en/models/147775" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000103266/design/2024-03-23_fb6186fdc76a4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">Boxes Diamond Edition</a></td></tr><tr><td style="width: 50%"><figure class="image"><a href="https://makerworld.com/en/models/392542" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000103266/design/2024-03-24_bbcd7d56b5ac1.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542" rel="nofollow noopener">Stackable Boxes</a></td><td style="width: 50%"> </td></tr></tbody></table></figure>

Organizer Box / Boxes

Organization 

Stian_K

This is a model I made to have with my wall mountet TV, for a clean look with minimal cables hanging around.I printed mine on textured PEI with generic pla settings, but I've added differents settings. &nbsp;It's designed to print without support.&nbsp;

Nintendo Switch wall mount

Support

Guerra.igor

Published from <a target="_blank" href="https://www.thingiverse.com/thing:5641606" rel="nofollow noopener">https://www.thingiverse.com/thing:5641606</a>&nbsp;<h4>Summary</h4>Forerunner 945: width 22mm axis 47mmFenix 6x: width 26mm axis 51mm<h4>Tags</h4><a target="_blank" href="https://www.thingiverse.com/tag:garmin" rel="nofollow noopener">garmin</a><a target="_blank" href="https://www.thingiverse.com/tag:garmin_mount" rel="nofollow noopener">garmin mount</a><h4>License</h4>CC BY&nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:5641606" rel="nofollow noopener">Carbon Handlebar Road Bike Mont GARMIN Forerunner 945 And Fenix 6x</a> by <a target="_blank" href="https://www.thingiverse.com/pemlik" rel="nofollow noopener">pemlik</a> is licensed under the <a target="_blank" href="https://creativecommons.org/licenses/by/4.0/" rel="nofollow noopener">Creative Commons - Attribution</a> license.

Carbon Handlebar Road Bike Mont GARMIN Forerunner 945 And Fenix 6x by pemlik

Bike

Indibles

Christmas tree balls ornament decoration

Christmas tree balls ornament decoration 3

Christmas

FRIARTUCK11

The HistoryRobert Indiana debuted the design for his famous sculpture as a painting in 1964. After constructing the aluminum piece, Indiana lent it to the City of Philadelphia as part of the U.S. Bicentennial in 1976.&nbsp;<a target="_blank" href="http://www.associationforpublicart.org/artwork/love/" rel="nofollow noopener">LOVE</a> remained in John F. Kennedy Plaza for two years.&nbsp;The sculpture moved briefly to New York until a local businessman bought it and donated it to Philadelphia. In February 2018 — after a year away from public view — the sculpture returned with a new color scheme of red, blue and purple instead of blue.An iconic image synonymous with Philadelphia, the piece’s likeness has been recreated on items ranging from postage stamps to jewelry.&nbsp;Check out the companion AMOR sculpture here:<a target="_blank" href="https://makerworld.com/en/models/14233?profileId=14214" rel="nofollow noopener">https://makerworld.com/en/models/14233?profileId=14214</a>&nbsp;This PrintI printed this with 0.2mm layer height in gray instead of blue. I started with red for the first 3 layers on a textured build plate, then I added a color change to gray for the remaining layers. Turned out great!

Philly LOVE Sculpture

Decoration

spencerwondo

This is a simple PTFE tube connector uses for joining two pieces of tubing to one another. It can be used in conjunction with my Filament Dry Box to connect the PTFE tube coming out of the back of the box to the Tube coming out of the Back of Bambu printers.

PTFE Connector

3D Printing

cruse2382

Edit - Reorientated and enlarged so now it prints loads better and all words a readable but would still benefit from a 0.2mm nozzle but no longer a big difference. &nbsp;will look 100% better with a 0.2mm nozzle but i don't have one fitted at the minute so did it with a 0.4mm thats why a couple of letters don't look great.

UPDATED kitchen conversion chart

Kitchen

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

Tool

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a target="_blank" href="https://www.buymeacoffee.com/Tridense" rel="nofollow noopener">https://www.buymeacoffee.com/Tridense</a> </h4> Bring the Uno cards safely into your suitcase or backpack with a new plastic case that wont dissolve after a few uses! Holds all 108 uno cards in a standard packPress on the sides of the top piece to release the lidFits both of Mattel's Uno and Dos cards <h3>Print at 0.2mm layer height</h3>All the parts are pre-oriented for printability.&nbsp;The regular parts are for up to 34mm tall cardstacks.The wider parts are for up to 38mm tall cardstacks.&nbsp;Please measure your cardstack before you print so you know which size to use.&nbsp;<h4>Changelog:</h4>2023.09.23: Added a version for taller cardstacks if you have additional cards2023.09.14: Added blank version if you have other cards like “Dos” or alike.2023.09.11: Improved locking slightly. (Case top v2)

Uno Cards Hardcase

Case

Version 2 is now available! Please use the v2 Left-hand side and v2 Right-hand side print profiles and read the instructions below!&nbsp;DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;Description:&nbsp;The AMS Lid Riser allows you to keep your AMS lid closed while providing additional clearance for larger filament spools.&nbsp;Need even more spool clearance? The <a target="_blank" href="https://makerworld.com/en/models/244691" rel="nofollow noopener">AMS Lid Riser XL</a> is now available!&nbsp;Version 2 Instructions:<ul><li>Print both sides of the AMS Lid Riser v2 along with the tongues for each side.</li><li>Insert the tongues into the bottom of each side. Press each side firmly down on a flat surface (such as a table) to make sure the tongue is fully inserted and even. While glue is not required I did apply CA glue to the tongues before assembly. Please make sure you&#39;re applying glue to the correct side as it only fits in one way.</li><li>Wait for the glue to dry before installing the AMS Lid Riser v2.</li><li>To install the AMS Lid Riser v2 open the AMS lid, insert one riser piece at a time and firmly press the tongue into the rubber gasket, and close the AMS lid as pictured.</li></ul>Version 1 Instructions:<ul><li>Print both sides of the AMS Lid Riser v1</li><li>It&#39;s recommended that you print this model with a brim on a cool, smooth surface build plate.</li><li>Once printing is complete, open the AMS lid, insert one riser piece at a time, and close the AMS lid as pictured.</li><li>The AMS Lid Riser has a tongue on the bottom that fits into the AMS lid groove. The AMS lid tongue closes into the top groove of the AMS Lid Riser.</li></ul>Notes:<ul><li>Do not enable Flow Dynamics Calibration when printing or the part may overlap the lines.</li><li>It is not recommend to re-orient the position of the parts on the build plate unless you&#39;re an advanced user. They&#39;re positioned in this fashion to avoid warping that can be caused by close proximity to the fan.</li><li>Shown as printed in standard PLA</li></ul>