bvallens

Dr Operator

UPDATE 6/21/2024: The following changes were made based on feedback that I&#39;ve received.                                                                            - Increased the contact area of the slots on Waist 3 to help with stability.                                      - Adjusted plate #6 to prevent overlapping of calibration lines when using an X1C.                                      - Increased the circumferential height of both faces to prevent tilting when installed.                                      - Added additional supports to the chest.                                      - Added an additional magnet to the chest and door to help keep the door closed.                                           - Reduced the length of Hand 1 by 10%                UPDATE 5/17/2024: Seriously, all of the necessary supports have been added thanks to @SirWaynesworth and @SrGrinch. UPDATE 5/16/2024: I&#39;ve added supports for the head as per the feedback that I&#39;ve received.  I&#39;m having a lot of fun designing stuff around the MakerWorld hardware kits and up next is a Cogsworth clock using the Clock Components Kit 011 and 4x2 mm Round Magnet (20PCS) - CA001. Links to purchase both of those items are in the Bill of Materials list down the page further. When I got the hardware kit in my hands for the first time, two ideas came to me right away. This is the bigger, more complex of the two ideas. If you&#39;re not familiar with Cogsworth, he is a character from the classic Disney movie Beauty and the Beast. Notes:<ul><li>I made a “happy” face as well as the unimpressed face and the faces can be swapped at any time.</li><li> Fully assembled, it stands 312 mm or just over 12&#34;.</li><li>The Door Window colour is listed as white in the profile because there is no colour option for Transparent PLA in Bambu studio</li><li>This was fun, we should do it again sometime.</li></ul>&nbsp;Filaments used: Bambu PLA Basic - GoldBambu PLA Basic - Black Bambu PLA Matte - Dark BrownBambu PLA Matte - Desert Tan Eryone PLA - White AMZ3D PLA - TransparentAMZ3D PLA - Sakura Pink&nbsp;<figure class="image image_resized" style="width: 45.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-21_862053b705ab98.png"></figure>ASSEMBLY: Assembly shouldn&#39;t take long at all and while technically you don&#39;t need super glue, it is recommended for certain parts. Start with the face. For this you will need the Clock component kit, both hands, both nose pieces and the face you want to use. Insert the clock component into the back of the face and secure it with the nut that comes with the kit. From there, slide the hour hand onto the face followed by the first nose piece, the minute hand and finally the nose cap.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_2b963bbc1511c8.png">  <figure class="image image_resized" style="width: 37.41%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_ef73d37de10038.png"></figure>&nbsp;&nbsp;Now we&#39;re going to assemble the head. You will need all of the head pieces and the face. Start by fitting all four Head 2 pieces into the top of the head and then fitting Head 4 on top.&nbsp;<figure class="image image_resized" style="width: 62.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_34e58fcd8f6178.png"></figure>&nbsp;&nbsp;From there, slide the face into the back of the head and push it forward as far as you can. The back of the head attaches via magnets. When setting the magnets into the head and the back of the head, make sure you have the polarities correct. Once you have the head together, set it aside for now.<figure class="image image_resized" style="width: 71.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_daa109bace958.png"></figure>&nbsp; For the lower body, you will need all four feet as well as all four waist pieces. Fit the waist pieces over the feet as seen below, and I would highly suggest gluing that top piece down.<figure class="image image_resized" style="width: 65.32%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e09bdb358c1618.png"></figure>&nbsp; Next up is the door. You will need the door, the door window and the Neck. The neck fits into the door and then the window attaches to the inside of the door, securing the neck in place.<figure class="image image_resized" style="width: 73.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_a64261c168d348.png"></figure>&nbsp;&nbsp;Now we&#39;re going to connect everything together. Start by attaching the legs/waist to the body, and I would highly suggest using glue to secure those pieces together. After that, attach the Arms to the body as seen below.<figure class="image image_resized" style="width: 83.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e0147e75409638.png"></figure>&nbsp; Attach the head to the body with glue being highly recommended for securing the head to the body. Last thing to do is to connect the door. The hinge on the door itself has little notches and the body and door snap together using those notches.<figure class="image image_resized" style="width: 55.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_8e84ca12c1f21.png"></figure>

Clock Components Kit 011: Cogsworth

Cool gifts

Ford Maverick

DP design

Don't print in PLA if you keep your organizers in your vehicle. &nbsp;Designed in OpenSCAD. These parts didn't design themselves, please show your thanks with a “like” ❤!&nbsp;<figure class="table" style="height:1243.47px;width:871.764px;"><table class="ck-table-resized" style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">small bin</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:92.7222px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_0ed4f2af6b85.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/36753" rel="nofollow noopener">https://makerworld.com/en/models/36753</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">small bin</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:94.5972px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_86203e708721c.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/36755" rel="nofollow noopener">https://makerworld.com/en/models/36755</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">small bin/labels</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:85.7222px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2024-01-16_b6f39d3a04555.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/142169" rel="nofollow noopener">https://makerworld.com/en/models/142169</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">small bin/labels</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:83.0694px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2024-01-16_8d92e1614a2cb.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/140642" rel="nofollow noopener">https://makerworld.com/en/models/140642</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">small bin/labels</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:119.75px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2024-01-14_738f88faa3309.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/139006" rel="nofollow noopener">https://makerworld.com/en/models/139006</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">large bin</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:95.375px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_2873dc7e65e67.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/36748" rel="nofollow noopener">https://makerworld.com/en/models/36748</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">large bin</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:97.6667px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_b3d47aa63d3d6.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/36757" rel="nofollow noopener">https://makerworld.com/en/models/36757</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">large bin/labels</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:98.4167px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2024-01-16_d60db08ddb97a.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/142157" rel="nofollow noopener">https://makerworld.com/en/models/142157</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">large bin/labels</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:91.4722px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2024-01-16_4f9173be0e6f7.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/142162" rel="nofollow noopener">https://makerworld.com/en/models/142162</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">¼" router bits</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:91.3333px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_ae7ad1ffe1ca7.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/43423" rel="nofollow noopener">https://makerworld.com/en/models/43423</a></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">long ¼" router bits</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:91.7778px;"><img src="https://makerworld.bblmw.com/makerworld/draft/411182/2023-10-17_23fc65ad58ad5.jpg"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/43427" rel="nofollow noopener">https://makerworld.com/en/models/43427</a></td></tr></tbody></table></figure>

Packout low profile small bin T divider

Tools

TVL 3D

Englisch: &nbsp;A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where you need it.&nbsp;The clamp is in 2 parts so it can be printed without supports. You can also use the base peg and clip on own designs of whatever you want. I plan to add some other parts later.&nbsp;Everthing is cut to fit into a 256 mm Bambulab chamber. I added a 3mf file where 3 plates are prepared the way it worked for me. Most of the parts I printed in Bambu Matte PLA&nbsp;Feel free to comment how it can be improved. I still learn all these things.&nbsp;Deutsch:&nbsp;Ein erhöhter Laptopständer mit einem Wabendesign. Zusätzlich habe ich eine passende Schublade entworfen, um all euren Schreibtischkram aufzunehmen sowie eine Kabelklemme, die in die Waben eingesteckt werden kann.&nbsp;Die Klemme ist 2-teilig, so dass sie auch ohne Stützen gedruckt werden kann. Man kann auch die Basisklammer verwenden und eigene Designs anbringen. Ich plane, später noch einige andere Teile hinzuzufügen.&nbsp;Alles ist so zugeschnitten, dass es in eine 256 mm Bambulab-Kammer passt. Ich habe eine 3mf-Datei hinzugefügt, in der 3 Platten so vorbereitet sind, wie es für mich funktioniert hat. Die meisten der Teile habe ich in Bambu Matte PLA gedruckt.&nbsp;Schreibt gerne Verbesserungsvorschläge in die Kommentare. Ich lerne das ganze Zeug immer noch.&nbsp;

Laptop Stand with Tray and Cable Holder

Tech Items

Bearded Bastard

<h2>Hex Spool Box</h2><h2>Table of Contents</h2><ol><li>Change Tracking</li><li>Intro</li><li>Hex Spool Box Notes<ol><li>Dimensions</li><li>Printing Profile Notes</li></ol></li><li>Insert Notes<ol><li>Intro</li><li>Cautions</li><li>Dimensions</li><li>Printing Profile Notes</li><li>Naming Convention</li><li>Bambu Studio and Coloring Workflows<ol><li>Importing [Inserts Combined.3mf]</li><li>Importing [Hex Spool Box Inserts.step]</li><li>Bambu Studio Text Shape Tool Workflow</li><li>Adding Text and Graphics to an Insert in Fusion360</li></ol></li></ol></li></ol><h2>Change Tracking</h2><figure class="table" style="width:87.53%;"><table class="ck-table-resized" style="background-color:hsl(30, 75%, 60%);"><colgroup><col><col></colgroup><tbody><tr><td style="background-color:hsl(210, 75%, 60%);">Note</td><td style="background-color:hsl(210, 75%, 60%);">Date</td></tr><tr><td>Initial upload</td><td>10/30/23</td></tr><tr><td>Modified Inserts Combined print profile to include two additional plates with extra descriptors and a swatches plate.</td><td>11/7/23</td></tr><tr><td>Matching Bambu Spool coming very soon, will be compatible with the inserts!</td><td> </td></tr></tbody></table></figure><h2>Intro</h2>This project started out as an endeavor to learn Fusion 360. Previously I had mostly used Solidworks at the hobby/maker level but wanted to learn Fusion 360 as most parametric uploads were saved in f3d files. At first I wanted to use snap fits to create a box that snapped together with panels to mostly print the box in one plate. I did not have much experience with snap fits and figured it would be a good project to get some exposure on designing snap fits. This quickly led to a design that created a box with larger dimensions than I hoped for as I am storing my filament in cubby style furniture. I needed the box to be as small as possible, preferably to match the size of standard filament boxes provided by filament manufacturers. I moved on to designing a standard box and lid configuration. I always wanted the box to incorporate both honeycomb pattern and rounded corners. This proved rather difficult in Fusion 360 which led to another “learning” issue. Went with the “sheet metal” technique to wrap patterns around cylindrical and flat surfaces. This unfortunately made the design somewhat non-parametric. Technically it is parametric in that the pattern is equation driven but there are some parameters that rely on dimensions I could not parameterize due to the “sheet metal” technique.&nbsp;The box was originally designed around Bambu sized spools with just enough clearance to store the spool along with a vacuum sealed bag. The next step in the project was labeling. I landed on using inserts to label the boxes after some inspiration from the Honeycomb Storage Wall. The idea of using modular inserts was more of a happy accident than design intent. Once the insert snaps were designed and working, I modeled a multitude of inserts to allow for coloring and labeling in endless configurations. I have included inserts both with text and without text. I designed the inserts around the idea of using blank inserts as filament swatches and keeping the labeled inserts white with black text. I also designed a stacking insert to be used for those storing filament in the XY plane. The stacking inserts do work for the YZ plane as well, but it is nowhere near as stable as stacking in the XY plane.<h2>Hex Spool Box Notes</h2><h3>Dimensions</h3><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-24_8448f422e60d6.png"></figure><h3>Printing Profile Notes</h3>I have included two printing profiles for the Hex Spool Box: [Hex Spool Box.3mf] and [Box with PLA Inserts Example.3mf]. The former is only the Box and the Lid. The latter includes a PLA insert, Bambu logo Insert and some blank inserts as swatches for identifying the color. This profile is set to be printed by object where filament 3 would be the color of the filament being stored. This profile is simply an example of what a complete box would look like.<ul><li>Layer Height: 0.2<ul><li>If the layer height is set higher than 0.2, the 30 degree overhangs on the Z axis honeycombs become bridges causing bad surface detail and low layer adhesion. Prints will fail if printed higher and unsupported, print at your own risk when chasing speed.</li></ul></li><li>Support: Tree(auto), Support critical regions only, on build plate only.</li><li>Top Surface Pattern: Monotonic<ul><li>Default Monotonic Line creates a large number of tiny gaps that need to be filled, this slows the print and degrades the surface quality of the upper surface of the bottom.</li></ul></li><li>Bottom Surface Pattern: Concentric<ul><li>Speeds up the print, looks better as well if printed on a surface where layers are visible. (Optional)</li></ul></li><li>Wall Generator: Arachne<ul><li>Only changes layer width in a few layers, classic could be used if desired. (Optional)</li></ul></li><li>Infill: 15%</li><li>Infill Pattern: Gyroid</li></ul><h2>Insert Notes</h2><h3>Intro</h3>Inserts can be used to label the box, colorize/decorate, and to add stacking to the boxes. The text and graphics inserts were designed to have only one filament change, the text/graphics is only one layer high and is printed first to minimize filament changes. Due to this design, printing the inserts at 0.2mm layer height is a must. The [SOLID] or blank inserts are provided to use as filament color swatches or simply to add your own text or graphics using built in Bambu Studio tools or a CAD application.<h3>Cautions</h3>When inserting the inserts into the honeycomb, support the back side of the wall. When the inserts are fresh off the plate, the snap is a bit tight. This can be an issue when first inserting the inserts into the hexagons, especially on the hexagons in the Z axis as those tend to be the weakest due to their print orientation. This becomes less of an issue once the snaps on the inserts are worn in a bit from inserting and removing.<h3>Dimensions</h3><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-24_36826e2e86fbc.png"><figcaption>Note: Clearance is larger to account for hexagon shrinkage in the Z axis from printing overhangs.</figcaption></figure><h3>Printing Profile Notes</h3><ul><li>Layer Height: 0.2</li><li>Wall Generator: Arachne<ul><li>Helps fill in the text and graphics a bit better.</li></ul></li><li>Infill: 15%</li><li>Infill Pattern: Gyroid</li><li>Support: Normal(auto)<ul><li>Required only for the Stack Inserts, default settings work fine here.</li></ul></li></ul><h3>Naming Convention</h3>Each insert has a sequence of numbers: A x B x C. ABC can be seen as columns, the number will represent the number of hexagons occupied in that given column. See reference images.<figure class="image image_resized image-style-side" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-24_aae54e49541f.png"></figure><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-24_b0866f5080f0c.png"><h3>Bambu Studio Import and Coloring Workflows</h3>Importing [Inserts Combinedv2.3mf]No additional steps needed, all coloring and arrangements complete. There are 5 plates: Text and Graphics Inserts, Blank Inserts, Stack Inserts, Material Color Inserts, and Additional Descriptors.Importing [Hex Spool Box Inserts.step]<figure class="table" style="width:99.36%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>1. Open Bambu Studio, import [Hex Spool Box Inserts.step].</td><td> </td></tr><tr><td>2. Split the [Hex Spool Box Inserts.step] object to objects.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-28_57794f48a43b9.png"></figure></td></tr><tr><td>3. Each insert will now be contained in an object. Objects listed as [SOLID] are inserts that do not have text or graphics that necessitate multi material. These objects can be modified with the Text shape tool, see notes below these instructions on how to add Text shape objects to [SOLID] objects.</td><td> </td></tr><tr><td>4. Arrange all objects and split each named insert to parts.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-28_3ade975e1742.png"></figure></td></tr><tr><td>5. Once split, multiple parts will be listed under the object. The first part(*_1) is the main insert body, the remaining parts constitute the text or graphics bodies, change these part's filament for coloring.</td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/153861/2023-10-28_f62d2220e49e9.png"></figure></td></tr><tr><td>6. Repeat process for all inserts with text or graphics.</td><td> </td></tr><tr><td>7. Once complete, CTRL+A to select all objects, select Rotate (r) in the toolbar and set Y to 180 degrees to lay all objects flat on the plate.</td><td> </td></tr></tbody></table></figure>&nbsp;Bambu Studio Text Shape Tool WorkflowThe steps outlined below are to create exactly one layer high (printed @ 0.2) text that sits flush with the insert. If emboss or deboss is desired, change the embedded and thickness values and move the text_shape accordingly. <ol><li>Select a [SOLID] object to add text to.</li><li>Create a text object with the Text shape tool, ensure the Thickness is set to 0.20 and Embedded is set to 0.00.</li><li>Select the text_shape object then select the move tool. Subtract the current Z position value by 0.20 (3.10 - 0.20 = 2.90).</li><li>Set the text_shape object filament.</li><li>Rotate insert (assembly of insert object and text_shape object) 180 degrees to lay it flat on the plate.</li></ol>Adding Text and Graphics to an Insert in Fusion360Here is a quick rundown on adding custom text and graphics in Fusion360.<ol><li>Create a sketch on the top surface of an insert.</li><li>Add text or graphics sketch.<ol><li>The font I used for text is Dosis ExtraBold, height is 9mm, and character spacing 10.00.</li><li>For logos, I typically find svgs or images and convert them to svg and import the svg. Once imported, scale the sketch and position it, some guide lines before importing really help to position the sketch paths.</li></ol></li><li>Extrude sketch path to a distance of 0.2mm down into the insert body. Set the operation to New Body, NOT Cut.</li><li>Use the Combine tool. Select the insert body as the Target Body, select the rest of the bodies that encompass the text or graphics as the Tool Bodies. Set Operation to Cut, lastly tick the Keep Tools option. This will create a cut in the insert matching the text/graphics and keep the bodies to easily set the filament in Bambu Studio.</li><li>Export the component as a step file and follow the instructions above for splitting objects and setting the filament for the text/graphics in Bambu Studio.</li></ol>&nbsp;

Hex Spool Box

Organization

valjia

Low-poly vase great for Lego artificial plants. &nbsp;PLA0.2mm layer height2-3 walls5-10% infillno supports needed

Low Poly Vase for Lego Artificial Plants

Floral 

chilman408