bula87_pl

Ludo Timp

Z-axis cap for P1P, X1 and X1C  |  Loose fit!&nbsp;For all the people who want to give feedback on the fact that this cap is too loose of a fit:The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects. So I advice you to go for the safe option, in stead of the tight option. And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.I use them now for over a year and never had any z-axis defects, pop off's or other issues.&nbsp;Features:<ul><li>Shields the metal z-axis end-bearing from dust and filament debris.</li><li>Material: Bambu Lab Black ABS.</li><li>Chamfered bottom and top.</li><li>Diameter: 19mm.</li><li>Height: 2mm.</li><li>Includes 1,5mm inside indent for z-axis metal protrusion.</li><li>To be placed on top of the z-axis.</li><li>Sightly smaller then the z-axis hole so the cap can rotate freely if needed.</li><li>Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.</li><li>Easy removal: just press your finger a few seconds on the cap and lift it off.</li></ul>Disclaimer: This design is free to download including the accompanied files. By downloading this design, you agree to the following:<ul><li>as with all designs that you didn’t make and test yourself, mine may work or won’t for you,</li><li>I can’t give any guarantees for the print you make, the way you do it and which tools u use,</li><li>no rights can be derived and I can’t be held liable.</li></ul>If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.  If you like what I made and want to tip me for it, please do so at your discretion at <a target="_blank" href="https://ko-fi.com/ludotimp" rel="nofollow noopener">Ko-Fi</a>. Have fun and enjoy being creative!

Z-axis cap P1P, X1, X1C  |  Loose fit!

BambuLab

ShakaStudio

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ JAYO Black Transmission Distance: 0.8 PLA+ Creality Red Transmission Distance: 2.8 PLA+ Inland Egyptian Blue Transmission Distance: 4 PLA+ Creality Fl Orange Transmission Distance: 3.6 PLA+ JAYO Meta White Transmission Distance: 6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Egyptian Blue At layer #17 (1.44mm) swap to Fl Orange At layer #21 (1.76mm) swap to White for the rest.

BambuLab

toDo