budman17r

MalcTheOracle

One of the greatest struggles humans have had to overcome is the ability to group batteries in storage containers to keep them safe in the home, the office, or on your travels.&nbsp;Your need is my design.&nbsp;If your battery size of choice is 16850, this battery case is for you.&nbsp;The lid connects to the base with 3x2mm magnets. 4 magnets are used for the lid and another 4 for the base (2 each for the x2 case). Remember to match the north and south pole directions when inserting the magnets. The magnet holes are designed to fit the magnets so snuggly that glue is not required in most circumstances, feel free to use it though if you prefer.&nbsp;Available in storage capacities of 2, 3, 4, 5, & 6.&nbsp;Each case has the size shown on the top of the lid and bottom of the case and these can be embedded or printed with an AMS in a second colour.&nbsp;This is one of a collection of battery cases, I have created a public <a target="_blank" href="https://makerworld.com/en/u/3661582104/collections/657015" rel="nofollow noopener">Battery Storage</a> collection.<ul><li><a target="_blank" href="https://makerworld.com/en/models/195573#profileId-216228" rel="nofollow noopener">AA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/195580#profileId-216240" rel="nofollow noopener">AAA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/195584#profileId-216244" rel="nofollow noopener">C</a></li><li><a target="_blank" href="https://makerworld.com/en/models/195588#profileId-216250" rel="nofollow noopener">D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/195548#profileId-216192" rel="nofollow noopener">16850</a></li></ul>

18650 Battery Storage Boxes

todd

kabendesign

Snoopy has enlisted Woodstock and his friends to help in the patriotic parade. This 2D wall art can be placed on the top corner of a door frame, window frame, or picture frame. Enjoy! &nbsp;NOTE: I do not own the rights to the art in this model, and it is designed as fan art. This is not intended for commercial use.

Door Corner Art, Patriot Parade, Snoopy Woodstock 

4th of July

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;The Flexi Crocodile! This little Croc is a quick and easy print with a lot of color combination possibilities! happy printing!&nbsp;If you like my work, check out my <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a> where I upload almost every week :)&nbsp;

Flexi Crocodile 

Aubree

IXPatch

This is a flexible, articulated Charizard. It can stand on its feet and has a flexible neck, tail and wings.&nbsp;It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Charizard - Flexi Articulated Pokémon

poke

Waffly3D

Cute Humming Bird I modeled using Blender 4.0!Printing Multiples Will Optimize Filament Usage!View My Other Work Here! → <a target="_blank" href="https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname" rel="nofollow noopener">https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname</a>

Articulated Cute Humming Bird

Lilah

3DPrintCraft

This is my latest remix of the puzzle maze. Difficulty: 8 Pieces: 2 Printed in PLA Silk for that nice shine. The Box aligns perfectly when closed. It looks like a secret box. Add a note inside or slip some money inside as a gift to someone. Please note the solution before closing, in case you have trouble opening it after. Do never force movements or the inner nobs may wear/break. It should be a smooth motion or you are on the wrong path. Like this? Check out my other Maze Puzzles: Mini Maze Puzzle (Heaps of fun!) <a target="_blank" href="https://makerworld.com/en/models/62959" rel="nofollow noopener">https://makerworld.com/en/models/62959</a> Large Piggy Bank Maze Box: <a target="_blank" href="https://makerworld.com/en/models/58615" rel="nofollow noopener">https://makerworld.com/en/models/58615</a> Golden Gift Box - Small Maze Box: <a target="_blank" href="https://makerworld.com/en/models/51912" rel="nofollow noopener">https://makerworld.com/en/models/51912</a> Enjoy!

Puzzle Maze with knurled style. 

puzzle

Matthew Ghost

<ul><li>Secure Valuables Storage: Safe is perfect for safeguarding your money and precious items.</li><li>No Additional Parts Required: No complicated setup! This safe doesn't need any bearings, screws, glue or additional purchased parts.</li><li>Functional Mechanical Lock: Security is key – our safe features a functional mechanical lock for an extra layer of protection.</li><li>Dimensions 140x130x140 mm: Spacious enough for your valuables, yet compact enough to fit anywhere.</li><li>Include coin slot</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/396562/2024-01-12_a4eacf6d63b6c.gif"></figure>Assembly instruction:Instructions can be found in the video below. Please follow the procedure: (<a target="_blank" href="https://www.youtube.com/shorts/WcrcSSKChjk" rel="nofollow noopener">https://www.youtube.com/shorts/WcrcSSKChjk</a>)<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/WcrcSSKChjk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=WcrcSSKChjk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/WcrcSSKChjk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>A VERSION WITH CLEARANCE<ul><li>It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)</li><li>Parts with the letter C in their name are parts that have increased clearance. These parts must be glued.</li></ul>

Safe | Vault |  Bank | Money Bank | Piggy Bank | Safe box

Todd cool

jdalycache

<div><h1>Summary</h1><div>360 degree Dart Board light. This has been designed to be used with or without a surround.The top LED Ring has been split into 4 parts for a printer with a print surface of at least 300x300. It has also been split into 8 parts for a print surface of at least 200x200If you use the smaller (8) part for the LED ring. Print 4x the Fillet piece added at the 4 extra joints for strength.</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 5</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.28</div> <pre><code> Infill: <div>10%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Overture+Matte+Black++and+Azure+Film+Strongman++PLA" target="_blank" rel="nofollow noopener"> Overture Matte Black and Azure Film Strongman PLA </a><pre><code> Black & Red Notes: <div>Printed with 3 perimeters</div></code></pre><h1>Post-Printing</h1><div>sand and super glue all joints</div><pre><code> <img src="https://makerworld.bblmw.com/makerworld/draft/117415/2023-10-25_ppqpprh0z11f.jpg"></code></pre></div>

Dart Board 360 degree LED Light

darts

Longracks Labs

We Do This sign for context. I added magnetic tape to the back and put it on my toolchest.

We Do This Sign

signs

GlennovitS 3D

<figure class="image image-style-side image_resized" style="width:42.01%;"><img src="https://media.printables.com/media/prints/654672/rich_content/ef58c850-eedb-4168-86f4-81800a231e3a/ezgifcom-optimize-kopi-2.gif"></figure>I wanted to design a piggy bank that included the slot to insert money into the design, instead of adding a coin-slot at the last moment. This is what I ended up with. It does look good standing on the desk - but looks even better when spinning the top. You need to print and try it to see it ;-)<h3>Overview</h3>The model comes in 2 versions (for now).<ul><li>Lines (the one in the photos)</li><li>Pillshapes</li></ul>For all styles, you can use it with or without the insert part. But the insert part surely makes the mesmerizing effect way better ;-)More designs could be coming - depending on the popularity of the model.<figure class="image image_resized image-style-align-right" style="width:357px;"><img src="https://media.printables.com/media/prints/654672/rich_content/e45bb017-c841-465e-b9f7-34981afd91b3/ezgifcom-gif-maker-3-kopi.gif"></figure><h3>Twist it!</h3>To enjoy the beauty of this piggy bank, you need to twist the lid and see the different patterns! <h3>Assembly</h3>You dont need anything but the printed parts - and no glue. The assembly goes as follows:<ol><li>Place the Lid - Bottom on the desk</li><li>Place the Box inside the Lid - Bottom</li><li>Place the Insert into the Box (optional - but recommended)</li><li>Lift the Lid - Bottom up around to the top of the Box</li><li>Screw the Lid - Top and Lid - Bottom together </li></ol><h3>Print instructions</h3>Here is a few ideas:<ul><li>Supports: NO</li><li>Placement: Flat on bed. (They are oriented correctly from the start)</li><li>Colors: On the pictures, the Insert part is a different color - but would love to see different versions in the Makes section!</li></ul>Happy printing!&nbsp;<h3>Want to show your support?</h3>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

Mesmerizing Piggy Bank (twist/spin/fidget to enjoy the design!)

gabby

Romwba3D

A Festive Grinch andles split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;You can view all the Available Models - now over 220 models on https://www.romwba3d.com

Grinch Christmas Candle

christmas

Haix3D

Spool Adapter for Polymaker PolyTerra and PolyLite Filament. Designed for Bambu Lab AMS.

AMS Adapter Wheels for Polymaker PolyTerra and PolyLite Spools

Upgrades

neil3dprints

Update - 06/11/20. Green to brown to green STL file (Trees) were missing. This has now been uploaded and is ready for download. Sorry for the inconvenience.Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for play. Once play begins simply unfold the case and attach the miniature buildings to the outside of the case to create a mini play set. Each case will be themed with mini vehicles to print as well. The cases can also interlock so you can expand your little cities playset as I develop and release new Little City themed cases.This one is the Fun Fair!!! Go take a look at the attractions and find yourself mesmerized by the big wheel as it spins. Finding yourself a little parched, then go visit the Ice Cream van. The Fun Fair is colorful and joyful and a great addition to the Little City collection.Please check out and follow my profile page to see what Little Cities have already been released.Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together. Also I apologize, there are allot of parts required for this one. Sorry. :-(As this is part of a series I will design other themed cities, the bonus being is the cases will interlock, thus creating a bigger play-set. The roads will run in sync too. At this point I have about 26 little cities planned.Please note some of the parts may cause a choking hazard, so these 3D printed toys are not recommend for children under the age of 6.&nbsp;If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><h3>Print instructions</h3>This is not a MMU print. Simply print the parts and assemble them together.Please refer to the images for assembly instructions.The case I printed at 0.2mm layer height and 0.15mm for all other parts. Refer to the file names to see if colour changes (CC) are required and for what layer heights to apply the colour changes.The vehicle wheels print in one. Be patient and gentle to loosen them so they can turn. Also use a little glue to attach the transit van together while ensuring the wheels still turn.Any questions or queries just send me a message and I will get back to you when I can.&nbsp;If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a>

Little Cities - Fun Fair

toys

Amao Chan

This is an African elephant with 22 movable joints. The joint design of this elephant is different from the common chain-like design. These joints can be adjusted and fixed at different angles, allowing the elephant's trunk to be lifted and posed in various preferred positions. The tightness of the joints depends on the hardness of the materials used for printing. Using harder materials will result in tighter joints.&nbsp;The reason it is named "Blank" is to encourage the printer to add color to the elephant's body. For those with multi-color 3D printers, they can try printing each segment in different colors.&nbsp;When printing, please start by printing the tail. If the tail can rotate properly, then use the same printing settings to print the other parts. If the tail gets stuck and cannot rotate, please reduce the material flow to continue printing.&nbsp;3D printing settings Layer height - 0.2mm Infill Density - 12% No supports. <a target="_blank" href="https://www.facebook.com/amaochanstudio/" rel="nofollow noopener">https://www.facebook.com/amaochanstudio/</a> <a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a>&nbsp;多關節素坯非洲象這是一隻有22個可轉動關節的非洲象這隻非洲象的關節設計與常見的鍊條式的設計不同，這種關節可以調整角度後固定，因此這隻大象的鼻子可以抬起並且擺出自己喜歡的姿態。大象的關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。之所以取名為(白胚)的原因，就是鼓勵列印者能幫大象的身體上顏色，若有多色3D列印機的朋友就可以試著在每一段使用不一樣的色彩列印。&nbsp;列印建議 列印時請先列印尾巴，若尾巴能正常轉動，就以相同列印設定來列印其他部分。若尾巴卡住無法轉動，請減少材料流量來列印。 層高-0.2mm 免支撐 填充-12%

BLANK ELEPHANT

Figurines

MEAF designs

Easy to print and fun to make!perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter is a separated file so you can print it in different colors if you want to.&nbsp;there are a couple of accesories to personalize as you like: -spider and spiderweb-witch hat (to print in multicolor just add a “filament change” at height in your slicer)-witch broom&nbsp;just print them and glue them on top! <img src="https://media.printables.com/media/prints/303320/rich_content/172ab3e6-1b61-40a9-8498-f4536890476e/9e803eff-7369-4b17-93d4-d01349663ff5.gif#%7B%22uuid%22%3A%225dca924b-d91f-47a5-988e-dde55ca77721%22%2C%22w%22%3A640%2C%22h%22%3A640%7D"> &nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,24 mmPrint time: about 7 hours total for all plates Nozzle diameter: 0,4mm or 0,6mmInfill: 10-12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit.&nbsp;You can see my other models here:<a target="_blank" href="https://www.printables.com/social/281168-dgoalva/models" rel="nofollow noopener">dgoalva | Printables.com</a>