bthuntergg

pbbence1994

My next kit card is based of my local airport's favourite plane the yellow Antonov An-2. Cut the parts out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!<img src="https://makerworld.bblmw.com/makerworld/draft/465189/2024-01-20_b304a86656c44.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/465189/2024-01-20_e2371b636ae4e.jpg"></figure>&nbsp;

Plane Kit card (Antonov An-2)

玩具

BATTCAVE

I tried them all and nothing would snap on to the AMS buttons of my two new units purchased May 2024 so I downloaded this file and hacked away at it in MS 3D Builder to create one that actually snapped on to my AMS and did not rattle or easily come loose. I added a bullseye dimple that your thumb naturally gets traction on and makes loading a breeze.&nbsp;I could not help but think these could still be better so I made some minor tweaks to the file and sliced it for PETG. While the PLA+ version is indeed fine, these really lock on. &nbsp;For these I use 30mm Bambu PTFE tubes add guidance and smooth feeding. - Push the tube all the way through so 3mm is hanging out of the bottom side as shown in the images. This gives you PTFE from filament to funnel. Gently shape the PTFE to a nice arc towards the spools. Having filament in the PTFE can help you to not kink the tubing, you don&#39;t want that. :) &nbsp;I tried Capricorn tubing and the ID was a little too tight and there was a little drag. The PTFE fits very tightly and wont come out. Steady even pressure to install without kinking the PTFE is required. “Use the Force” as they say. :P (I was unable to add a PTFE tube as a BOM item but pretty sure y&#39;all have some laying around.)&nbsp;<a target="_blank" href="https://us.store.bambulab.com/products/bambu-ptfe-tube" rel="nofollow noopener">https://us.store.bambulab.com/products/bambu-ptfe-tube</a>&nbsp;Printed in Sunlu PETG.&nbsp;Def an item you want on your machine from new to avoid any wear and tear from abrasive filament.&nbsp;Enjoy!

PETG AMS Feeder Guide - Newest Version AMS

Molodos

Disclaimer: This design is inspired by the Spirograph drawing toy. &#39;Spirograph&#39; is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc.&nbsp;Update: The parametric version 2 with some new customization options is available now, check it out <a target="_blank" href="https://makerworld.com/en/models/513791#profileId-429935" rel="nofollow noopener">here</a>!&nbsp;A simple Spirograph drawing template gear kit that leads to really cool results. Just take two gears (inner gear inside an outer gear recommended, but feel free to experiment), insert your pen and go draw cool circles. The combination possibilities are (almost) endless&nbsp;Features<ul><li>Simple design</li><li>Simple to use</li><li>Beautiful results</li><li>Select from 2 outer and 10 inner gears</li><li>(almost) endless combination possibilities</li></ul>Recommended print settings<ul><li>Layer height: 0.2mm</li><li>No supports required</li></ul>You like my work? Consider to <a target="_blank" href="https://www.buymeacoffee.com/molodos" rel="nofollow noopener">buy me a coffee</a> :D

玩具

ams

工具