bryan.cabrera

Poldion

Introducing my design for a portable soldering fume extractor powered by USB-C, ideal for those who prefer flexible and health-conscious soldering even on the go, seamlessly pairing with your smart soldering iron.To bring this extractor to life, you'll need the 3D-printed components, a 120mmx25mm fan (normal PC fan), a DC-DC step-up converter (<a target="_blank" href="https://de.aliexpress.com/item/4001066566291.html?spm=a2g0o.productlist.main.65.77a47ea4ILKwhw&algo_pvid=0826ce18-f4bb-44a5-9fcc-ddaea96459e8&aem_p4p_detail=202402051519154594435373881600000995942&algo_exp_id=0826ce18-f4bb-44a5-9fcc-ddaea96459e8-32&pdp_npi=4%40dis%21EUR%211.92%211.73%21%21%212.02%211.82%21%40211b5e2c17071751557032417eb613%2112000027223591155%21sea%21DE%212213585481%21&curPageLogUid=DNQc3jipNoRf&utparam-url=scene%3Asearch%7Cquery_from%3A&search_p4p_id=202402051519154594435373881600000995942_33" rel="nofollow noopener">Aliexpress</a>), an 130mmx130mm Filter, and a USB-C socket(<a target="_blank" href="https://de.aliexpress.com/item/1005002292881776.html?spm=a2g0o.order_list.order_list_main.411.691c5c5fIiaV44&gatewayAdapt=glo2deu" rel="nofollow noopener">Aliexpress</a>).&nbsp;A crucial step in the assembly process is to ensure that the step-up converter is configured to produce an output voltage of 12V while operating on a 5V input.Equally important is the consideration that the step-up converter should not exceed a height of approximately 8mm. This height restriction is vital for the proper integration of components.&nbsp;For those seeking alternatives, it's worth noting that you can substitute the step-up converter and USB-C socket with a USB-C decoy(<a target="_blank" href="https://de.aliexpress.com/item/1005005515531468.html?spm=a2g0o.order_list.order_list_main.59.691c5c5fIiaV44&gatewayAdapt=glo2deu" rel="nofollow noopener">Aliexpress</a>) but it makes the fume extractor incompatible with older or budget power supplies.&nbsp;Ultimately, with careful consideration and proper assembly, this USB-C powered soldering fume extractor promises a convenient and health-conscious solution for your soldering needs, wherever you may be.

Boxy Fume Extractor

Tools

SWElite

Summary: Large and Thin Plates joined end-to-end, no glue needed! Great way to exceed the build plate limits.&nbsp;My wife asked for a sock drawer divider for a very popular <a target="_blank" href="https://www.ikea.com/ca/en/p/malm-3-drawer-chest-black-brown-30473149/#content" rel="nofollow noopener">IKEA night stand</a>. The problem was the length of the dividers being larger than the build plate.So, how do you join rigidly 2mm thick plates without using glue or adding extra bulk? ?I experimented with different ideas and I think I found the right combination for the perfect end-to-end joint. Once joined together, the plates are rigid and cannot be easily taken apart.<figure class="media"><div data-oembed-url="https://youtu.be/GzsMcN_4oWo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/GzsMcN_4oWo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Even if you do not need a drawer divider, you might still be interested in seeing how two thin plates can be joined into a much larger one with no glue. That means there are no limits on how long such plates can be!!!&nbsp;The current profile is the first iteration that made my wife happy.&nbsp;Do your own testing:If you want to do your own experiment with different filaments or layer thickness, feel free to download the <a target="_blank" href="https://makerworld.com/en/models/160732#profileId-176413" rel="nofollow noopener">R&D files</a> containing different draft angles for the zipper joint. Find out what is the minimal draft angle that would hold your tiles together in all three directions for your specific use cases.<a target="_blank" href="https://makerworld.com/en/models/160732#profileId-176413" rel="nofollow noopener">https://makerworld.com/en/models/160732#profileId-176413</a><figure class="media"><div data-oembed-url="https://youtu.be/-mJRpvnguQ0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-mJRpvnguQ0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Plates 1 and 2: Main Divider PlatesOn the first two plates you will find the two main pieces of a 16 ¾" long divider.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/604255/2024-01-19_177294951c641.jpg"></figure>To join them simply align the zipper and gently tap each bit in its place. Once assembled, the connection is very rigid and the two parts stay nicely aligned. They will act as one piece!&nbsp;Plate 3: Bottom SupportYou can use the main divider with the bottom support from plate 3 (shown in the picture above). This way it will stand on its own.&nbsp;Plates 4 and 5: Side DividersI have also included two side dividers if you want to join multiple main dividers together:<ul><li>8.75" long x 4" high on plate 4</li><li>7" long full height on plate 5.</li></ul>They can be inserted in the slots on the main divider, every inch. The design allows the use of side dividers end to end as shown below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/604255/2024-01-19_62d061b3644df.jpg"></figure>What other sizes do you need? Drop your request in the comments and I will add them.&nbsp;The Vertical Decor Collection:<ul><li>Slender Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91147#profileId-97491" rel="nofollow noopener">https://makerworld.com/en/models/91147#profileId-97491</a></li><li>Fat Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91133#profileId-97479" rel="nofollow noopener">https://makerworld.com/en/models/91133#profileId-97479</a></li><li>Candleholder Tall: <a target="_blank" href="https://makerworld.com/en/models/91168#profileId-97509" rel="nofollow noopener">https://makerworld.com/en/models/91168#profileId-97509</a></li><li>Candleholder Short: <a target="_blank" href="https://makerworld.com/en/models/91158#profileId-97497" rel="nofollow noopener">https://makerworld.com/en/models/91158#profileId-97497</a></li><li>Candleholder Double: <a target="_blank" href="https://makerworld.com/en/models/91181#profileId-97517" rel="nofollow noopener">https://makerworld.com/en/models/91181#profileId-97517</a></li><li>Tissue Box Holder with Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73097#profileId-77641" rel="nofollow noopener">https://makerworld.com/en/models/73097#profileId-77641</a></li><li>Tissue Box Holder without Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73057#profileId-77633" rel="nofollow noopener">https://makerworld.com/en/models/73057#profileId-77633</a></li><li>Tissue Box Holder without Bottom Lid (Kirkland): <a target="_blank" href="https://makerworld.com/en/models/67057#profileId-70913" rel="nofollow noopener">https://makerworld.com/en/models/67057#profileId-70913</a></li><li>Weightless Spheres: <a target="_blank" href="https://makerworld.com/en/models/99069#profileId-105629" rel="nofollow noopener">https://makerworld.com/en/models/99069#profileId-105629</a></li><li>Weightless Teardrop Vase: <a target="_blank" href="https://makerworld.com/en/models/106259#profileId-113422" rel="nofollow noopener">https://makerworld.com/en/models/106259#profileId-113422</a></li></ul>Door Frame Toppers:<ul><li>Downhill Skier Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/106214#profileId-113390" rel="nofollow noopener">https://makerworld.com/en/models/106214#profileId-113390</a></li><li>Tail-grabbing Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/126631#profileId-136909" rel="nofollow noopener">https://makerworld.com/en/models/126631#profileId-136909</a></li><li>Climber Door Frame: <a target="_blank" href="https://makerworld.com/en/models/138127#profileId-150395" rel="nofollow noopener">https://makerworld.com/en/models/138127#profileId-150395</a></li></ul>Also:<ul><li>Wall Tiles (Wallpaper): <a target="_blank" href="https://makerworld.com/en/models/200956#profileId-221306" rel="nofollow noopener">https://makerworld.com/en/models/200956#profileId-221306</a></li><li>Ringosaurus bigger and deeper: <a target="_blank" href="https://makerworld.com/en/models/57828#profileId-59525" rel="nofollow noopener">https://makerworld.com/en/models/57828#profileId-59525</a></li><li>Unlocked Birthday Level Cake Topper: <a target="_blank" href="https://makerworld.com/en/models/104796#profileId-111855" rel="nofollow noopener">https://makerworld.com/en/models/104796#profileId-111855</a></li><li>Biggest Gift Box: <a target="_blank" href="https://makerworld.com/en/models/84040#profileId-89836" rel="nofollow noopener">https://makerworld.com/en/models/84040#profileId-89836</a></li><li>Large Copter Propeller: <a target="_blank" href="https://makerworld.com/en/models/64664#profileId-67877" rel="nofollow noopener">https://makerworld.com/en/models/64664#profileId-67877</a></li><li>Deluxe QWIRKLE Holder: <a target="_blank" href="https://makerworld.com/en/models/190538#profileId-210321" rel="nofollow noopener">https://makerworld.com/en/models/190538#profileId-210321</a> </li></ul>&nbsp;

Large Drawer Organizer (Video)

Organization 

DraconPern

Gridfinity organizer for button batteries, 6U. Holds CR20xx, CR16xx, CR12xx, LR/SR44, LR/SR41. Built-in slot for a pick. FYI, CR12xx slot and SR44 slot are very similar in size but they are different. Please stack the battery same pole touching each other to avoid shorts. Only magnet hole and no screw hole on this model.

Gridfinity Button Battery Holder

Gridfinity

Jaxel

2024-01-18: Increased the tolerances on the holes for the bearings by 0.2mm. Use a rubber mallet to fit all pieces together.2024-01-13: By request on the BL Discord, I have added a low-height filament guide that pulls from the bottom instead the top.&nbsp;This external spool holder puts your external spool directly to the left of your printer. I didn't like having it behind the printer, making it hard to access, and I don't like having things on top of my printer because of the vibrations. The included print profile has multiple plates with different options.<ul><li>Plate 1: 80mm<ul><li>Rollers and pins.<ul><li>These rollers will hold any spool up to 68mm wide.</li><li>For BambuLab spools, which are 66mm wide.</li><li>Uses standard <a target="_blank" href="https://www.amazon.com/dp/B07C6FL8TW" rel="nofollow noopener">608 skateboard bearings</a>.</li></ul></li><li>Base boot plate.</li><li>Universal closed left side wall.</li></ul></li><li>Plate 2: 100mm<ul><li>Rollers and pins.<ul><li>These rollers will hold any spool up to 88mm wide.</li></ul></li><li>Base boot plate.</li><li>Universal closed left side wall.</li></ul></li><li>Plate 3: 80mm Guides<ul><li>Filament guide.<ul><li>Push in a <a target="_blank" href="https://us.store.bambulab.com/collections/accessories-for-x1-series/products/ptfe-tube-connector" rel="nofollow noopener">BambuLab PTFE Tube coupler</a> from the back, black side forward.</li><li>Make sure to line up the center cross with the gaps in the guide hole.</li><li>Why do I use these instead of getting standard PC-M10 connectors? Because BambuLab gives these couplers out like candy. Your printer comes with 2, every AMS you buy comes with another. So I have quite a few of these just lying around. You probably do too.</li></ul></li><li>Low Height Filament Guide</li></ul></li><li>Plate 4: 100mm Guides<ul><li>Filament guide.</li><li>Low Height Filament Guide</li></ul></li><li>Plate 5: Open Walls<ul><li>Universal attachment brace<ul><li>The nature of open side wall is so that it can slide down into the brace which slots underneath your printer. This keeps your spool holder directly attached to your printer and as stable as possible.</li></ul></li><li>Universal open right side wall with spool arm.<ul><li>The spool arm is there to stop the spool from getting pulled out of the holder when you reach the end.</li></ul></li><li>Universal open right side wall (no spool arm).<ul><li>If you prefer not to have the spool arm, such as if you use my <a target="_blank" href="https://makerworld.com/en/models/87146#profileId-93439" rel="nofollow noopener">Desiccant Holder</a>, you can use this right wall.</li></ul></li></ul></li><li>Plate 6: Closed Walls<ul><li>Universal closed right side wall with spool arm.</li><li>Universal closed right side wall (no spool arm).<ul><li>If you don't want to attach your external spool holder to your printer, and instead just want it to be floating and movable at will, you can use these closed side walls to have it all look nicer.</li></ul></li></ul></li></ul>All pieces in this model are friction fit, so you don't need to use any glue if you don't want to.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

External Spool Holder and Guide

X1 Carbon Accessories

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

AMS Purge Calibration V2

Calibration profiles 

SkubOpMakrel

A simple clip-on adapter which makes the factory spool holder able to hold larger spools. Clips on without tools or needing to unscrew the spool holder. The print works printed as draft on ludicrous mode.&nbsp;Questions are welcome and please like, rate and share.

Tools

Organization

Gridfinity

X1 Carbon Accessories

Calibration profiles

X1 Carbon Upgrades