bryan.benavides

cBoLsmUiEc

This Darksaber is an accessory made for Big Bricks - The Mandalorian (<a target="_blank" href="https://makerworld.com/en/models/374088#profileId-280373" rel="nofollow noopener">The Mandalorian - Big Brick Figure by BigBricks - MakerWorld</a>)Please have a look at his awesome models and join his community. Print: It is easy to print - you can print it without support and brim. Just use the profile above (0,16mm, PLA) Assembly: Just stick and glue both parts together.

Darksaber for BigBricks Madalorian * Dunkelschwert

Big Brick STuff

Williams Industries

There are 6 profiles, this one which is normal size, another that is a key chain, magnet, large one, flat bottom for standing up, and fuzzy skin.&nbsp;Magnets are 15x2mm&nbsp;This is part of a welcome/starter pack that I am putting out there. In our Patreon below, you will find several models, we typically do about 40+ files a month.&nbsp;Check out my other Easter files <a target="_blank" href="https://makerworld.com/@WilliamsIndustr/collections/870865" rel="nofollow noopener">HERE</a>:&nbsp;<a target="_blank" href="https://makerworld.com/@WilliamsIndustr/collections/870865" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/715054/2024-03-16_e13c88941580c.jpg"></a>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/715054/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;

Peeps Style Easter Bunnies

Holiday Stuff

This can be used as a coaster, or.. This can be used with my desk buddy stand <a target="_blank" href="https://makerworld.com/en/models/80177#profileId-178576" rel="nofollow noopener">HERE</a>.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/699119/2024-03-13_967b85ee2294b8.png"></a></figure>

The Wife is Right Coaster or Sign

Signs

planpa3d

A Mario style ghost floating around, suspended by his enormous tongue! Haha&nbsp;Check here for the King Boo M&M stash pot version, <a target="_blank" href="https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot" rel="nofollow noopener">https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot</a>Been wanting to design this ghost for awhile, but wasn't able to come up with an idea to get it to float around until now. The tongue makes the perfect stand for this Amazing module.&nbsp;Split the main ghost in two easy to print pieces. Orient the flat spots on the build plate and other than the supports for the pin holes no other supports are required.The mouth insert and tongue print out and fit great at 100% or what ever scale you desire.The eyes can be a bit tricky to pop into place, Study the module around the eyes and orient them correctly, placing the bottom part of the eye in place then pushing the rest in with a pen does the trick for me. If you have too much difficulty popping them in place try scaling them down 1%&nbsp;Make sure to put the mouth insert in place before attempting to press the teeth in. It just makes thing easier. The teeth should fit in fine printed at 100% but once again, if they are too much trouble try scaling them down 1%Thanks for checking out my design!!UPDATE 1/10/22 Added a loose fit teeth file. if you are haveing problems fitting the regular teeth in the model try this one with added tolerances. hopefully this helps.You can follow me on Instagram, <a target="_blank" href="https://www.instagram.com/pla.n.pa/" rel="nofollow noopener">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here… <a target="_blank" href="https://patreon.com/planpa3d" rel="nofollow noopener">https://patreon.com/planpa3d</a>

Mario Boo Ghost

Figurines

MikeProch

Lockable Valentine's Day gift box. Put something inside and suprice your love. Key can be printed dualcouloured or colourless. Enjoy !☺️🤌

Lockable Valentine box

Containers

waveman

Small (S) version of the <a target="_blank" href="https://makerworld.com/en/models/21188#profileId-19458" rel="nofollow noopener">Sturdy Infinity Cube</a> with strong hinges that won't break easily. This cube is designed with a lot of slack, so that it moves freely.&nbsp;I designed this after having several fails with other models, where the hinges would break when trying to loosen them after printing. Hopefully, this design will print well for everyone!&nbsp;These models and openscad source file can also be downloaded from <a target="_blank" href="https://github.com/jhpieper/sturdy-infinity-cube" rel="nofollow noopener">https://github.com/jhpieper/sturdy-infinity-cube</a><h3>Post-Printing</h3>The hinges should bent quite easily after printing, with the hinges on the front and back side being more tight due to the orientation. Just work the cube a few times and everything should be quite loose.<h3>Cube Sizes</h3>It is best to not scale the model, as it messes with the spacing in the hinges. Instead, check out these other models optimized for their size:<ul><li><a target="_blank" href="https://makerworld.com/en/models/36109#profileId-33936" rel="nofollow noopener">16: S</a></li><li><a target="_blank" href="https://makerworld.com/en/models/21188#profileId-19458" rel="nofollow noopener">20: M</a> -- try this first! This is the most common size.</li><li><a target="_blank" href="https://makerworld.com/en/models/36113#profileId-33940" rel="nofollow noopener">24: L</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36115#profileId-33943" rel="nofollow noopener">30: XL</a></li><li>36: XXL</li></ul>&nbsp;

Big Brick STuff

Holiday Stuff

Signs

Figurines

Containers

Fidget Objects