brett5seger

RomeEight1

A simple model for hanging your driver bits on a wall. I made the two outside slots larger to hold my two drivers. The screw holes are designed for standard drywall screws (the fit is a little tight). I have included the step file and the Fusion360 file. Please forgive the work in the Fusion360 file. It certainly could have been done better but I am learning the software. It prints on the back face and without supports.

Driver Bit Holder

Garage

Michal

A compact poop container (S - small version) designed for the Bambu Lab A1 and A1 mini printer. Very easy to attach and remove from the printer.A larger version of the basket is available at this link: <a target="_blank" href="https://makerworld.com/en/models/501368#profileId-416430" rel="nofollow noopener">https://makerworld.com/en/models/501368#profileId-416430</a>&nbsp;UPGRADE 19.06.2024According to your comments, I made the following changes: 1. Yellow arrows - latches have been added to prevent the basket from sliding during vibrations. 2. Red arrow - the shelf on which poop was sticking has been removed. 3. Green arrow - the wall has been raised to further protect the poop from falling out. 4. The height of the basket has been increased by 5mm to increase its volume.5. To make the basket quieter, you can cut a thin sponge and stick it to the bottom from the inside.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451897/design/2024-06-19_7865e4dc0924e.jpg"></figure>

Compact poop bucket S (A1, A1 mini)

A1 Mini Accessories

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I've given them in the print profile description. I can not guarantee the quality of any print profile posted by anyone other than myself.<ol><li>Darwinian Award</li></ol>&nbsp;SUMMARY: This model is an award trophy presented as DNA on a pedestal. The Cytosine and Thymine interlinks between the backbone is made with several strings that your printer can bridge. The front is blank so you can add text in Bambu Studio or whatever your favorite design software is.&nbsp;To change the text in Studio, open the project in Studio and select “Objects” just above the settings. From there, scroll to the bottom where it says “text_shape” and right click that. It will have an option for “Edit text”. Then change the text and font to your liking.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>0.28 Layer Height (This is a hard requirement or the strings wont come out right)</li><li>Seam: Aligned (This can be set to back if you prefer the front to be as smooth as possible)</li><li>Bridge Flow: 0.96 (This is my default as the Bambu default is a bit too much for a good long string)</li><li>Wall Loops: 5 (This prevents the infil from being visible.</li><li>Infill: Gyroid 10%</li><li>Infill/Wall Overlap: 25% (This isn't 100% required, but it will improve the odds of the strings coming out right)</li></ul></li></ul>&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;INITIAL RELEASE 10/15/2023:&nbsp;Uploaded blank darwinian award trophy.

Trophy - Darwinian Award

save

SH Designs

Organize your spice cabinet with The Spice Station! Quickly and easily access all of your herbs and spices. Customizable to fit your cabinet interior. Choose from 3 leg sizes or use the alternative wall fasters for a clean look.&nbsp;To fit your Spice station: Measure the width of your cabinet interior. Then subtract 7" (178mm) from the width. Change the X value of the center bridge price to that value. Ex: a 12" wide cabinet would need a 5" center bridge. (be sure to uncheck “uniform scale” in your slicer before resizing the center bridge X-value).

The Spice Station

Household

Haix3D

Hey,&nbsp;since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat the procedure.The tool fits all printers that have a standard 8mm lead screw installed. So basically with all common 3d printers.You should print the tool as fine as possible. The highest layer height should be maximum 0.2mm. The finer the part is printed, the better the cleaning effect. Perfect results are achieved with Bambu Lab 0.08mm layer height.&nbsp;Your printer must also be well calibrated so that the tool fits correctly into the lead screw. It is normal that the part must be clicked quite tightly.&nbsp;If you have any questions or suggestions for improvement, please let me know.

Garage

A1 Mini Accessories

save

Household

X1C Accessories