braindon

SøndaeMedia

<h2>Mood Lamp by SøndaeMedia</h2>This lamp will enhance your home and is also a great gift.We have given this lamp as a gift many times and it always guarantees big happy eyes :)&nbsp;You also need an e27 socket. I prefer to use a fire flickering light as a light source. This creates the best mood.In the pictures the lampshade was printed from Black Forest Filaments PLA Bamboo & Cork. The Matte Green PLA from Geeetech is also a warm mood. I use black PLA CF or PLA Matt for the base.&nbsp;Mood Lamp Base: https://makerworld.com/en/models/178520#profileId-196444&nbsp;&nbsp;Socket: <a target="_blank" href="https://www.amazon.de/ledscom-Textilkabel-Stecker-Schalter-Lampen-Fassung/dp/B09BHFSNVY/ref=nav_ya_signin?crid=235AY65D22LPX&keywords=ledscom%2Be27&qid=1707157807&sprefix=ledscom%2B%2Caps%2C103&sr=8-36&th=1" rel="nofollow noopener">https://www.amazon.de/ledscom-Textilkabel-Stecker-Schalter-Lampen-Fassung/dp/B09BHFSNVY/ref=nav_ya_signin?crid=235AY65D22LPX&keywords=ledscom%2Be27&qid=1707157807&sprefix=ledscom%2B%2Caps%2C103&sr=8-36&th=1</a>&nbsp;Ceiling lamp: https://www.amazon.de/dp/B0B7MHC7RK/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B0B7MHC7RK&pd_rd_w=xKQu0&content-id=amzn1.sym.ae2317a0-2175-4285-af64-66539858231f&pf_rd_p=ae2317a0-2175-4285-af64-66539858231f&pf_rd_r=GM1JG1TRC1F9ZSZY8SHA&pd_rd_wg=gkqgE&pd_rd_r=93a6b637-f9a1-4e4c-bb89-727c0a6868b0&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&nbsp;Bulb: <a target="_blank" href="https://www.amazon.de/s?k=leuchtmittel+feuer&crid=6YO43B1RSMP0&sprefix=Feuer+leucht%2Caps%2C114&ref=nb_sb_ss_ts-doa-p_2_12" rel="nofollow noopener">https://www.amazon.de/s?k=leuchtmittel+feuer&crid=6YO43B1RSMP0&sprefix=Feuer+leucht%2Caps%2C114&ref=nb_sb_ss_ts-doa-p_2_12</a>&nbsp;

Mood Lamp

Lighting

emmaginn

<h2>Pebble Planter with Hidden Drip Tray</h2>The one in the photo was resized at 80%. I&#39;ve resized as low as 60% without any issues with the locking drip tray. Hope you like it!&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Pebble Planter with Hidden Drip Tray

Planters / Vases

Prestige Prototype

Introducing the Mid Century Modern Planter:Transform your green space with our Mid Century Modern Planter – a masterpiece of minimalist design and modern aesthetics. This easy-to-print model seamlessly blends sophistication with simplicity, offering a touch of timeless elegance to any environment.Crafted for both form and function, our planter boasts a watertight design to make plant care a breeze. No need to worry about excess water – we've included a seamlessly integrated plate that effortlessly catches overflow during watering. Experience the perfect harmony of style and practicality as you bring this sleek planter to life in your 3D printing projects. Elevate your plant game with our Mid Century Modern Planter – where beauty meets functionality.

Mid century modern - Medium Planter

misc

krazi201

Some simple “Maggie Simpson” earrings (please see my other uploads for matching keychain profile, which is a little bigger, thicker and stronger).&nbsp;Please use my print profile and a 0.2 nozzle to get a decent result.Print on textured plate to have a nice surface finish.&nbsp;The colored layers are only 0.5mm in total to keep down printing time.As a result of this you might see black shadows through bright surface colors from black top layers (1mm in total).If you like to have brighter colors just change size/ratio of assembled objects as you wish.

Maggie Simpson Earrings

Jewelry

kriswillcode

After seeing many people&#39;s problems with my <a target="_blank" href="https://makerworld.com/en/models/66672" rel="nofollow noopener">previous fidget switch&#39;</a>s spring, I decided to create a new variant that allows you to adjust the spring&#39;s tension whenever you want. Some days you may want a soft, tactile click; other days you may want a loud, snappy click - this fidget does both! And it even has a more ergonomic form factor!&nbsp;This little switch consists of just eight parts! And, just like my previous switch, you&#39;ll need to print two of some parts. The body of the switch also has two options, because who doesn&#39;t like choices?&nbsp;If you&#39;re looking for a fidget switch that has fewer parts, prints quicker, and uses less filament, check out my <a target="_blank" href="https://makerworld.com/en/models/467451" rel="nofollow noopener">Print-in-Place Fidget Toggle Switch</a>.&nbsp;<blockquote>⚠ Heads up, hot shot!This is a tricky print. This print has a few small pieces that don&#39;t work with brims. These have limited bed contact, so you&#39;ll need nearly perfect bed adhesion. Because of the small tolerances in this print, your flow rate must also be perfect. Finally, if your printer has any noticeable elephant&#39;s foot, then forget about printing this.</blockquote><h4> </h4><h4>Settings</h4><ul><li>Designed for a 0.4mm nozzle</li><li>0.16mm or 0.2mm layer height</li><li>3 walls</li><li>≥5 top/bottom layers</li><li>20% infill (but more feels better)</li><li>Slice with Arachne if available</li></ul>All files should be in the correct orientation to print. Supports are not required, but a brim will help when printing the pegs. I do not recommend using a brim on the springs as it&#39;s difficult to remove and any brim remnants will interfere with the action of the switch.&nbsp;<h4>What to Print</h4><figure class="table"><table><thead><tr><th>Part</th><th>Qty</th><th>Notes</th></tr></thead><tbody><tr><td>Body</td><td>2</td><td>There&#39;s two options: smooth or grip; print two of the same option</td></tr><tr><td>Peg</td><td>2</td><td>A brim helps here!</td></tr><tr><td>Spring</td><td>2</td><td>Don&#39;t use a brim on these!</td></tr><tr><td>Toggle</td><td>1</td><td> </td></tr><tr><td>Slider</td><td>1</td><td>A lower layer height is preferred here: 0.16mm or 0.12mm</td></tr></tbody></table></figure>&nbsp;<h4>Assembly</h4>The last 7 photos demonstrate the assembly process.<ol><li>Test your prints: Place the slider between the two body halves and verify the slider can slide freely. Then, place a peg in the toggle and verify the toggle can rotate freely.</li><li>Insert both pegs into one side of the body. These will be extremely tight (that&#39;s intentional!!!). If the pegs absolutely won&#39;t fit, you might need to reprint them with the X and Y scale reduced by 0.2 to 0.4% (99.8 to 99.6%).</li><li>Place the springs into the slider and check the orientation: the &#34;arms&#34; of the springs should point towards each other, and the &#34;bump&#34; on the slider should point towards the arms.</li><li>Move the slider towards the rounded ends of the springs and carefully press the springs into the body half from step 2. The springs should be parallel with the bottom of the body.</li><li>Move the slider away from the rounded ends and slip the toggle on the peg. Use a finger to separate the springs for easy placement.</li><li>Check the motion of the slider and the toggle. If everything looks good, place the other half of the body on top and press the two body halves together. Be sure the springs are properly aligned into their respective slots.</li><li>You&#39;re done! Flick away!</li></ol><h4> </h4><h4>Protips</h4><ul><li>This switch is not designed to be disassembled, so good luck with that.</li><li>A drop of lube between the toggle and the peg works great depending on your filament(s).</li><li>A small amount of beeswax applied to the outside of the springs helps if you find the slider difficult to move. But, the slider may shift during some intense switch flipping.</li><li>The pegs require some force to properly insert, but they have to hold the switch together. No other part (e.g. the springs) should require any significant force.</li><li>If you&#39;re rocking an AMS, use &#34;Others &gt; Print sequence &gt; By object&#34; to quickly print all parts on one build plate while using different filaments!</li></ul>&nbsp;If you print one of these switches, please post a make: I love seeing all of your creative color combinations!

Adjustable Fidget Toggle Switch

Toys / Fidgets

PhaseworksCA

This design takes the classic elegance of a feline and reimagines it through the lens of modern art, using a blend of polygons and hexagons to create a stunning, faceted masterpiece. Each angular line and hexagonal pattern is intricately arranged to capture the grace and mystique of a cat, resulting in a piece that's both contemporary and timeless. Ideal for cat lovers and aficionados of abstract art, this 3D print file offers a unique way to infuse your space with a touch of sophistication and geometric charm. Download now and add a purr-fectly polygonal flair to your art collection!&nbsp;If you are getting use out of my models and would like to support my design endeavours,<a target="_blank" href="https://www.buymeacoffee.com/phaseworksca" rel="nofollow noopener"> you can buy me a coffee here</a>. Completely non-essential but always appreciated!&nbsp;  <figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599349/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Polycat - Geometric Polygon Cat

The Big Greek

A quick little project for my wife's desk. She didn't need much, apart from a few USB, SD card and MicroSD holders. It shouldn't be big either, so that it saves space on the desk.It is printed with PLA-CF&nbsp;Have fun printing and if you like it, just like it and download it :-)&nbsp;---------&nbsp;Ein kleines schnelles Projekt für den Schreibtisch meiner Frau. Sie brauchte nicht viel, ausser das ein paar USB-, SDCard- und MicroSD-Halter dabei sein sollten. Groß sollte es auch nicht sein, damit es platzsparend auf dem Schreibtisch ist.Gedruckt ist es mit PLA-CF&nbsp;Viel Spaß beim Drucken und sollte es gefallen, einfach liken und downloaden :-)

Desk Organizer USB MicroSD SD

Tools / Accessories

BuzzEye

You can resize X and Y axis, but Z must remain unchanged&nbsp;Swap Instructions (if you do not have AMS):&nbsp;Start with black <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992830017755" rel="nofollow noopener">PLA Basic | Bambu Lab EU</a>At layer #6 (1.00mm) swap to Red <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992829952219" rel="nofollow noopener">PLA Basic Filament with spool / 1kg / Gray (10103) | Bambu Lab EU</a>At layer #25 (2.28mm) swap to Gray <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=46956524241244" rel="nofollow noopener">PLA Basic Filament with spool / 1kg / Orange (10300) | Bambu Lab EU</a>At layer #28 (2.84mm) swap to White <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992829919451" rel="nofollow noopener">PLA Basic Filament with spool / 1kg / Black (10101) | Bambu Lab EU</a>At layer #30 (4.84mm) swap to Gray <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=46956524241244" rel="nofollow noopener">PLA Basic Filament with spool / 1kg / Orange (10300) | Bambu Lab EU</a>At layer #31 (5.00mm) swap to White <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992829919451" rel="nofollow noopener">PLA Basic Filament with spool / 1kg / Black (10101) | Bambu Lab EU</a>

Japanese Nature Scenery Hueforge

Hueforge

DesignCraft

DISCLAIMERS:<ul><li>Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.</li><li>INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a matching spool to test so your feedback is important!</li></ul>Description:&nbsp;This adapter system wraps the edges of an INLAND 1kg 199x64mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>INLAND nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print INLAND.A for the left-hand side and INLAND.B for the right-hand side</li><li>Affix to each respective side of the INLAND spool</li><li>See attached photos</li></ul>Notes:<ul><li>The reason for separate models is that the spool's wall width is thicker on the side with the branding label.</li><li>I'm not sure if all INLAND spools are wound in the same direction so if the branding label is on the opposite side you may need to swap the rings from what I have here in the instructions.</li><li>It may help if you remember that INLAND.B is for the Branding side of the spool.</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>