brady3dprinting

3D PRINT TUGA

Mount for ender3 with BMG and v6 hotend with 5015 fan

Full pressure

Ender parts and upgrades

Fully 3d printed shoes<ul><li>TPU（85A is a good choice）</li><li>The default size is European Standard 42.</li><li>Please enlarge the size one to two according to the actual shoe size for better comfort and experience</li><li>Please refer to the magnification ratio in Crocs Shoes - Full 3d printed in MakerVerse Designs for magnification ratio.</li><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed</li></ul>35-83.33%        36-85.76%37-88.10%        38-90.48%39-92.86%        40-95.24%41-97.62%        42-100%43-102.38%      44-104.76%45-107.14%      46-109.52%47-111.90%      48-114.29% If you like this model, please boots to me, I will bring you a better model.Finally, I wish you a good printing experience,good luck&nbsp;全3D打印拖鞋&nbsp;<ul><li> 最好使用85A TPU（更软）</li><li>模型默认尺寸为42码</li><li>请根据直接平常使用的鞋码放大1-2码，这样更舒服</li><li>放大倍率请参照MakerVerse Designs大佬的Crocs Shoes-Full  3d打印的放大率。</li><li>如果鞋子码数太大打印机放不下，请使用Bambu Studio旋转并使用其中的剪切功能，创建新的平台接触面</li></ul>35-83.33%        36-85.76%37-88.10%        38-90.48%39-92.86%        40-95.24%41-97.62%        42-100%43-102.38%      44-104.76%45-107.14%      46-109.52%47-111.90%      48-114.29%如果你喜欢我的模型，请给我投一张助力票感谢&nbsp;&nbsp;

Slippers-Shoes-Fully 3D-printed-鞋-拖鞋

Business

GoldenSilence

This is based on ScanTheWorld's Artec3D scan of the original sculpture. The print profile specifically uses Matte PLA with high quality settings. Matte PLA is a brittle material so the supports are reinforced. I suggest you remove supports carefully with nose pliers and calibrate your filament before attempting, specifically temperature as Matte PLA is prone to slow flow.&nbsp;&nbsp;"In 1443 Donatello went to Padua to work on the bronze Crucifix intended for the altar in the centre of the choir of Il Santo (the Church of St. Anthony of Padua). We know from a contemporary document that it was being finished and polished in 1445 but that it was completed only in 1449, when it was placed in the middle of the church. It was therefore not conceived as part of the group called the Altare del Santo, which Donatello executed about 1447-50.This is a crop of the overall crucifix, leaving just the head and expressive features known in Donatello's later works." (Scan the world)

Christ on the Crucifix (CROP) - Matte PLA

K2_Kevin

Gridfinity 1x4 Divided Hex Bin

Gridfinity 1x4 Divided Hex Bin

gridfinity

Lithophane

jarvizar

3d miniature of Las Vegas, Nevada!&nbsp;Includes a colorized version highlighting the Formula 1 circuit!Also includes a small wheel for the “High Roller” ferris wheel.&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Collection of F1 Miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/450282" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/450282</a>&nbsp;<h3>Printing & Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/551661/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Las Vegas 3D Miniature (F1 Edition)

Cities

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;&nbsp;This will be my final Ams internal fix as i believe there is no bettor way to fix it internally anymore. Thank you so much for your support.&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? Ams Filament Pull Back Fix V2 Upgraded is a total revamp design of the <a target="_blank" href="https://makerworld.com/en/models/47982#profileId-49834" rel="nofollow noopener">hugely successful previous model</a> for correcting the internal Ptfe tubes angle inside the Ams and maintain a straight Ptfe feeding into the Ams motor to reduce friction and pressure.&nbsp;&nbsp;Important Note: This new design is used to replace the older version. You can choose to use any of the version or try 1 then if it doesn't work very well then try the other one, but please DO NOT use both new and old model together. It will make things worse.&nbsp;&nbsp;Main difference with the previous model <a target="_blank" href="https://makerworld.com/en/models/47982#profileId-49834" rel="nofollow noopener">Ams Fix Failed To Pull Back Filament Error</a><ol><li>Completely New Design, even accurately designed to solve the problem compared to the original version.</li><li>Will NOT affect your warranty as its reversible.</li><li>Even well supported by the new screws design comparing to my previous fix or other similar clones trying to do a lookalike workalike.</li><li>Precise measurement for reduced friction of filament moving through</li><li>Helps reduce the internal Ptfe wear and tear</li><li>Fix is now much closer in distance to the root of the problem.</li><li>Ensuring nearly ZERO possibility or chances of the tube flexing near the entry point of the Ams internal filament hub causing that misalignment that might cause an error to pop up.</li><li>Angle of the entry for the Ptfe into the Ams internal Filament have been re-optimised once again..</li><li>ez to install, just unscrew the 2 screws at the Ams internal Filament Hub and put in the fix then put back the screws.</li><li>As the fix supporting the Ptfe is now right outside the entry of the <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub" rel="nofollow noopener">Ams internal filament hub</a>, possibility of failure to fix the problem because of bent or misshaped tube is now greatly reduced.</li><li>This fix have been tested for on 1 X1C, 1 P1P and 2 P1S for about 94800 retractions so far as of this listing.</li></ol>&nbsp;Please ignore the silver screw i used as seen in the install video, just use the same original 2 black screws from your internal Ams filament hub. In order to make and design and measure this fix, i rounded my own screw threads after assembling and disassembling 50 times for variations i tested against height, angle and thickness.&nbsp;Please follow the installation video closely to ensure you are installing it correctly. Failure to follow will affect how well the fix will work. Video at end of page.&nbsp;&nbsp;Who needs this fix? 1) Constantly having errors like Failed To Pull Out Filament and similar related2) The Ams motor sounds like struggling when move filament in and out of the Ams to the Extruder, like a lot of friction when moving.3) Ams cannot load or unloading properly. (Not including Spool being too light or a break of filament in the Ams)4) Having a constant struggle on any of your Ams slots, people complained about Slot 2 and 3 but this fix is designed to fix all of 4 slots for Failed To Retract / Pull Out Filament Error.&nbsp;&nbsp;Why choose this fix instead of other similarly designed fix?I do think that in theory, this new fix will work great and likely even superseding in performance when compared to my ver 1 design.&nbsp;This is ez to print but yet its measurement is very precise. I have spent over 60 hours to design and confirmed the proper angle to move the internal Ptfe to allow filament to pass through smoothly and then printed multiples models to ensure that my fix works by properly aligning the internal Ptfe tube to reduce and possibility even eliminating the dreadful Failed To Pull Out Filament Error or similar related problems.&nbsp;&nbsp;<h2>Preparation Video (Proper removal of support and ensure Ptfe tube fit)</h2><figure class="media"><div data-oembed-url="https://youtu.be/QZkzHy08jVI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QZkzHy08jVI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-04_20b419972641e.jpg"></figure>&nbsp;<h2>Installation Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/6rs1xp-rX5Q"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6rs1xp-rX5Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>(As the location of the fix is right at the entry point of the Filament internal hub do make sure you align then push in the Ptfe Tube tightly making sure that the Ptfe tube actually entered the internal filament hub.)&nbsp;Also take note to the arrows at the side, make sure the fix is NOT clipping or pressing on any of the Ams wiring when you are installing it. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-05_c033df2f88abb.png"></figure>Pic from Bambu wiki.&nbsp;<h2>Important Notes:</h2>Please watch the video and description carefully. Its really important to make sure the fix installed correctly to let it work properly&nbsp;Note 1: The Ptfe Tube is supposed to be tight and snug for the support with precision. Plz make sure you installed it correctly as per the video instruction.&nbsp;Note 2: Please ensure you followed the preparation video closely before installing to ensure all supports are CLEANLY removed so the fix will work perfectly&nbsp;Note 3: You are required to properly assembled the Ams including the 2 screws that you unscrewed during the disassembly as this model require everything to be tight and snug for it to work properly.&nbsp;Note 4: When reassembling try to adjust the 2 very long wires connecting to the rear of the Ams Circuit board, don't let them press on any of the Ptfe tube. I don't think it matters but its a good practice.&nbsp;Note 5: Do NOT overtighten the screws please. As shown in the installation video, just tight then finger tight will work Don't jam it all the way down please. The screw is just to hold the fix in place.&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Removal Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/8sDRKjJCU2U"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8sDRKjJCU2U" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.&nbsp;

AMS Filament Pull Back Fix V2 Updated

upgrades tested

RestoreDoctor

Radius Gauge R1-30mmSimple tool for determining the radius. A must for being able to draw parts!&nbsp;Settings:<ul><li>0.20mm Standard </li><li>Infill 20 %</li><li>no support</li><li>PLA/ PETG</li><li>Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/578621/rich_content/fa528cba-7f9d-4977-a2a8-8de6a90157df/thumbs/cover/800x466/png/screenshot-2023-09-10-171052.webp"></figure>

Radius Gauge R1-30mm

Tools

PRINTINGlab

Description: Bring home classic elegance and timeless romance with this refined Amor and Psyche statuette. The 15 cm tall STL model masterfully captures every detail of this iconic mythological representation, offering an unparalleled 3D printing experience.Key Features:<ul><li>Impeccable Details: Every aspect of the sculpture is precisely rendered, from the grace of the figures to the intricate texture of the drapery, ensuring an end result of extraordinary beauty.</li><li>High Quality: The model has been carefully optimized to ensure high-quality 3D printing without compromising on fidelity to the original design.</li><li>Ideal Dimensions: Standing at 15 cm, the statuette fits perfectly on shelves, desks, or as a central piece in display cases, adding a touch of mythological charm to your decor.</li></ul>Recommended Materials: This model adapts wonderfully to a variety of materials, such as PLA, ABS, or PETG. The choice of material will influence the final appearance of the statuette, providing flexibility in customizing your project to suit your unique style.Add a touch of culture and beauty to your home with this unique Amor and Psyche statuette. Download the STL model today and embark on your fascinating journey into creating 3D artworks that capture the essence of mythology and timeless aesthetics.

Amor and Psyche Statuette High-Quality STL Model Love and Psyche statue statue home ornament decor 

statues

Waikikiprod

[FR]Kit de matériel de manipulation de base 10 pour l'apprentissage de la numération et de la décomposition centaines, dizaines, unités.Inspiré de produits déjà existants dans le commerce, ce kit a pour avantage de mieux faire percevoir aux enfants les unités dans les différents blocs (Testé en école).&nbsp;<figure class="table" style="width:98.53%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13174?profileId=13167" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_0ffbaec5f9be1.png"></a></figure><h4><a target="_blank" href="https://makerworld.com/fr/models/13174?profileId=13167" rel="nofollow noopener">Modular Strong Tetra'aide</a></h4></td><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13616" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_28cb51e71fb6c8.jpg"></a></figure><h4><a target="_blank" href="https://makerworld.com/fr/models/13616" rel="nofollow noopener">Set Mathematiques Base 10</a></h4></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:70.51%;"><a href="https://makerworld.com/fr/models/13837?profileId=14254" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_3otmqtwfyorw.jpg"></a></figure><h4><a target="_blank" href="https://www.printables.com/fr/model/188262-boitier-capteur-lufdaten-versions-multiples" rel="nofollow noopener">Boitier Capteur Lufdaten</a></h4></td><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13844" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_3f37ac61b059a.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13844" rel="nofollow noopener">Gears Puzzle - Educationnal Kit</a></td></tr></tbody></table></figure>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>&nbsp;[EN]Basic 10 manipulatives kit for learning to count and decompose hundreds, tens, ones.Inspired by existing products on the market, this kit has the advantage of making children better understand the units in the different blocks (tested in school).<h3>Print Settings</h3>Printer Brand:CrealityPrinter: Ender 5Rafts:Doesn't MatterSupports: Doesn't MatterResolution:0.2mmInfill: 15%Filament: ArianePlast PLA Yellow, Green, Blue, Red&nbsp;&nbsp;<figure class="table" style="width:98.53%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13174?profileId=13167" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_0ffbaec5f9be1.png"></a></figure><h4><a target="_blank" href="https://makerworld.com/fr/models/13174?profileId=13167" rel="nofollow noopener">Modular Strong Tetra'aide</a></h4></td><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13616" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_28cb51e71fb6c8.jpg"></a></figure><h4><a target="_blank" href="https://makerworld.com/fr/models/13616" rel="nofollow noopener">Set Mathematiques Base 10</a></h4></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:70.51%;"><a href="https://makerworld.com/fr/models/13837?profileId=14254" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_3otmqtwfyorw.jpg"></a></figure><h4><a target="_blank" href="https://www.printables.com/fr/model/188262-boitier-capteur-lufdaten-versions-multiples" rel="nofollow noopener">Boitier Capteur Lufdaten</a></h4></td><td style="text-align:center;"><figure class="image"><a href="https://makerworld.com/fr/models/13844" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-14_3f37ac61b059a.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13844" rel="nofollow noopener">Gears Puzzle - Educationnal Kit</a></td></tr></tbody></table></figure>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Set Mathématiques - Base 10 - Kit de manipulation

Education

TomSmith

Just a basic to do list stencil for a5 paper

A5 to-do stencil

stencil

humebeam

Support&nbsp;All my designs and mods are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)<ul><li><a target="_blank" href="https://www.paypal.me/humebeamengineering" rel="nofollow noopener">https://www.paypal.me/humebeamengineering</a></li></ul>About&nbsp;This is a set of two different test pieces to print before printing the big Hydra AMS parts. You need some calipers to measure the printed parts. The first test is to print the roller slots and the second is the dovetail joints.&nbsp;Make sure you dial in flow correctly before you start, we've seen a few Hydra prints that were overextruded so avoid that. The problem then is you can't join the dovetail joints and therefore assemble properly without sanding them down a little, you can also get problems with the rollers binding.&nbsp;The Bambu Lab printers usually do a pretty good with automatic flow calibration but it's best to confirm flow anyway, sometimes it is inaccurate.&nbsp;First, print the roller test piece, print it in the direction I have set it. Measure the slot with calipers. The distance should be 82.50 mm but all polymers shrink a little as they are printed and cool off. Ideally the slot should be at least 82.20 mm to avoid binding as the rollers are around 81.60 mm wide with the bearings fully pressed on. If the measured slot is less than 82.20 mm you are likely overextruding a little so reduce flow a % or two and print it again.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_977t626n7ohf.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_i45ix5nwi1lc.jpg"></figure>Next, print the dovetail test joints. These should join nicely. If they don't, you are likely overextruding.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_hdt0n7j1hg71.jpg"></figure>

Hydra AMS - Test Pieces

Hydra

喵喵mya

层高0.1，首层0.1， 100%填充打印 标签区域尺寸为30mm*40mm,2mm圆角&nbsp;原始文件中有F3D文件，可以使用Fusion360进行二次创造&nbsp;色卡本身需要需要使用0.1的层高，起码要保证首层是0.1层高，100%填充，收纳盒对打印配置要求不高，默认即可，盖子推荐使用透明PETG材料打印&nbsp;为了适配gridfinity，添加了一个长度更短的版本，这个版本的收纳盒附带了gridfinity的模块，底部可以预留了4x2mm的磁铁的槽位，如果不需要这个模块，也可以将它移除&nbsp;&nbsp;0.1mm layer,0.1mm first layer,100% infill&nbsp;The label area size is 30mm*40mm with 2mm rounded corners&nbsp;Click the Raw Model Files button to download the F3D file, Edit with Fusion360&nbsp;The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing&nbsp;To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/316654/2023-12-28_d7e7bab1f51b.png"></figure>

打印耗材色卡 Filament Sample Card 

tests and swatches

JDJDJD

<h2>Meet The Shifty!</h2>&nbsp;The Shifty allows you to quickly and easily center your build plate on Bambu Lab 3D Printers (X1C/P1S/P1P Style).&nbsp;This is the first and original Build Plate Guide ever to be shared on MakerWorld.&nbsp;As a brand new product, I&#39;ve meticulously designed the Shifty to make your life easier, every time you insert your build plate.&nbsp;<h3>How it works:</h3>&nbsp;The Shifty build plate guide increases the contact area of the built-in plate guides. This means you have more room for error when sliding your plate into place.&nbsp;It also eliminates cases where the plate skips over the existing guides, or lands on top of them uncentered and un-level which can cause failed prints.&nbsp;The increased guide height also allows you to slide the plate in at a greater angle, which is more comfortable and minimizes instances when the plate clamps down before it&#39;s properly positioned.&nbsp;<h3>How to use:</h3>&nbsp;Slide your plate in like normal, but aim the back left corner of your plate towards the Shifty. Once you make contact it will take over and shift your plate perfectly into place.&nbsp;The Shifty is low profile and clips to the back left corner of your bed, out of the way from activity.&nbsp;<h3>Installation:</h3>&nbsp;Step 1 - Connect The Front:&nbsp;Insert the front tab into the notch located at the front of the built-in guides.&nbsp;Step 2 - First Click:&nbsp;Wrap it around towards the back and press so it “clicks” into place. (see video below).&nbsp;Step 3 - Second Click ←- Double Check This One:&nbsp;After you hear the first click as shown in the video, you may have to press down on rear hook (right side of back edge) to seat it properly into place. This is the second click. I recommend pressing down in the back even if you think you have it in place just to make sure.&nbsp;When properly installed, the Shifty will be very snug, perfectly level, and without distortion.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083480/design/2023-12-04_8cba772444acc.gif"></figure>&nbsp;&nbsp;If you have any questions, feel free to direct message me.&nbsp;&nbsp;<h3>Tips and Notes:</h3><ul><li>The Shifty is designed to look cool and print beautifully. The supports are custom tailored and break away easily in one piece with a simple twist for most materials. For some materials, you can simply twist counterclockwise while it&#39;s still on the plate and it will cleanly break away.</li><li>To replace or remove, access it from the bottom side of the bed and press backwards on the back edge until it unclips.</li><li>When properly installed, the Shifty will be very snug and perfectly level. If it isn’t, study it&#39;s shape and check the back edge, you may need to push it down on the back edge so it snaps into place.</li><li>If you print a lot of high-temp materials, consider making a Shifty in PETG, ASA or ABS. These profiles are tested and also available.</li><li>At this time I&#39;m releasing the left side only. I have a right side model completed, but am not releasing it for now since the left-only approach works well and keeps the Shifty away from the back right purge strip activity. Feel free to mirror a right side in Bambu Studio for your own use, but please don&#39;t upload profiles with the right side mirrored at this time.</li></ul>

The Shifty - Build Plate Guide

upgrades

quicksam

Mario mushroom EDC toyHardware kit1*3*10mm x12 magnets （for 30 size）1*3*10mm x6 and 2*3*10mm x6 magnets （for 35 size）KW-10/A microswitch x1👇IMPORTANT👇<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/Js0IwlfZETo"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Js0IwlfZETo"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Js0IwlfZETo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/hlNv2vf9G2w"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=hlNv2vf9G2w"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/hlNv2vf9G2w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;