bosho.liviu

Tyler Tork

A frame intended for small photos or artworks which will either sit on a separate stand, or be stuck on with magnets. To save material and printing time, the parts are hollow, with walls of selectable thickness. The frame is in two parts – the actual frame, and a backing piece or “block” that snaps in to hold the artwork in place without gluing parts together (though you can glue it if you wish, of course). The model is designed for easy printing – the pieces are correctly oriented in the STL file, and generally you will not need a brim or supports (see below for exception).&nbsp;Note: the project <a target="_blank" href="https://makerworld.com/en/models/481390" rel="nofollow noopener">Parameterized Picture Mat by Tyler Tork</a> is useful in conjunction with this model.<h3>Parameters</h3><ul><li>The size of the space to leave inside for the artwork (including depth).</li><li>The width and depth of the frame border.</li><li>The size of the ledge in the frame to hold the frame contents in from the front.</li><li>How far back the contents will be set from the front of the frame.</li><li>Whether there will be magnets on the back, and their type (cylindrical or magnavinyl).<ul><li>If cylindrical, their number (3 or 4) and dimensions.</li></ul></li><li>The thickness of the walls and backing material. A larger frame should have thicker walls, so it doesn&#39;t flex too much.</li><li>Whether there&#39;s a cutout or “recess” in the back. You may want the cutout to make part of the back visible (small artworks often have artist information on the back), or just to save even more material. A recess can be used to hold an artwork which is dimensional or smaller than the frame, as in the sample photo where the small watercolor is held in a shallow hole to keep it centered without adhesive, with a clear cover to hold it in from the front.</li><li>The shape of the cutout or recess – rectangular, oval, or custom based on an SVG file you import (NOTE: SVG import doesn&#39;t work in the MakerWorld paramaterizer… yet).</li><li>The width and height of the cutout, and if a recess, its depth.</li><li>Whether to make the back of the recess solid, or just a little ledge to hold the artwork in place from the back.</li><li>Whether to add “sawtooth” hangers on two edges of the frame to let it hang from a pinhead or small nail, and how big to make the teeth.</li></ul><h3>For complete instructions</h3>Please refer to <a target="_blank" href="https://freelittleartgalleries.art/2024/05/lightweight-picture-frame-with-recess/" rel="nofollow noopener">the article about this model on freelittleartgalleries.art</a>.

Light parameterized mini magnetic picture frame

Pentru Casa

Darren

AUTOTRAY LITE&nbsp;<figure class="table" style="width: 95.57%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_5b16cb3dce6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_63e85c7e5eb8b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_8b4c3443c53cb.jpg"></figure></td></tr></tbody></table></figure>&nbsp;This is a more compact version of Autotray that can be printed on any printer with a 180 mm x 180 mm plate including the A1 mini, P1 and X1. The full sized Autotray is here: <a target="_blank" href="https://makerworld.com/en/models/425827?from=search#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827?from=search#profileId-329526</a><ul><li>It is quick to print. 8.5 hours for P1 and X1 and 11.5 for A1 mini</li><li>It has much fewer parts than the full sized Autotray</li><li>Is is quick and simple to assemble and disassemble with clips (see the Clip cards).</li><li>The angular position of the tray can easily be adjusted.</li><li>It folds easily for storage.</li><li>I have included print profiles for the X1 and the A1. The print files are in 3 parts. The main unit, the rear headrest brackets and the optional components.</li><li>Support is only required for the rear headrest brackets</li><li>The hinges for the steering wheel brackets and the rear headrest brackets are print in place.</li><li>The rear head rest bracket features a rotating cylinder to lock the bracket in place.</li><li>No external parts are required</li></ul>Options and features<h2 style="text-align: center">*** NEW OPTIONS FOR AUTOTRAY LITE ***</h2>Here are some new options for Autotray Lite.  Be sure to check back as I will be adding to these in the next while.&nbsp;<figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_54c652af38c7.png"></figure></td><td>Car basketball add-on A great way to relieve boredom when waiting in the car.  I enjoyed making and playing this game. You can get this add-on <a target="_blank" href="https://makerworld.com/en/models/461087#profileId-369765" rel="nofollow noopener">here</a>     </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_5b00ce96e39de.png"></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_5f73650b40ee5.png"></a></figure></td><td>Autotray Laptop/tablet add-onThis is one of the new optional add-ons for Autotray to allow use of a laptop/tablet.  The trays replace the tablet holder and can be quickly and easily be added and removed.  Enjoy!  &nbsp;You can get this add-on by clicking <a target="_blank" href="https://makerworld.com/en/models/459198" rel="nofollow noopener">here</a>&nbsp;&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_e2f1cc338a717.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 97.33%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_e32eaf1e349e2.png"></figure></td><td>Chopstick holder add-on This add-on is for a chopstick holder.  I added print profiles for the A1 and the P1 and X1 as well as a STL file.</td><td><figure class="image image_resized" style="width: 93.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_456ee0b5f4d96.png"></figure></td></tr></tbody></table></figure>Autotray includes many options and features which can quicly and easily be attached to Autotray with clips:<ul><li>Phone mount brackets (back and bottom)</li><li>Nintento Switch mounting brackets</li><li>Fry holder</li><li>Ustensil holders</li><li>Tablet holder</li><li>Mouse pad</li></ul><figure class="table" style="width: 96.61%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_791d636e9d508.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_aa448f0f2541b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_df39a6ff45d86.png"></figure></td></tr></tbody></table></figure>Autotray has mounts to enable adding other parts and features.  Assembly is quite simple. It is shown in the gif.&nbsp;Autotray full size&nbsp;Autotray is also available in a larger 3d model suitable for in car offices etc.  The link for the 3d model is : <a target="_blank" href="https://makerworld.com/en/models/425827#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827#profileId-329526</a>&nbsp;I welcome any comments and suggestions about improving Autotray.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;&nbsp;

Autotray Lite - A1, P1 and X1 compatible

schiko

If you want to use your A1 (mini) without AMS lite the cable and the PTFE tube wobble around.Use these clips to fix them.I use two of them …&nbsp;Update 2024-01-15: Due to request I uploaded a version for 2 PTFE tubes and the cable.&nbsp;Update 2024-03-13: Added a tighter version for those who think the clips are too loose. In my print profile the normal version is on plate 1 & 2 and the tighter version on plate 3 & 4

PTFE / Cable Clip Bambu Lab A1 (mini) without AMS

A1 Mini

*** BREAKING NEWS ***ATTENTION: 65 mm long toothpicks &amp; 0.2 mm layer height is required for this version!ACHTUNG: Für diese Version werden 65 mm lange Zahnstocher &amp; 0,2 mm Schichthöhe benötigt!*** *** *** *** *** ***&nbsp;************ UPDATE ************I&#39;m still collecting suggestions for Version 3. Let me know in the comments if there&#39;s anything missing:1.   65 to 68 mm toothpicks must fit 2.   Container for approx. 100 toothpicks 3.   Design without text and symbols4.   Shouldn&#39;t look like a Chinese coffin, but more like a Porsche********************************&nbsp;I love mechanical &#34;Print-In-Place&#34; models. And sometimes I enjoy clicking or screwing things together after printing.But why shouldn&#39;t my 3D printer handle that if it can do it much better than I can...Inspired by various models and 3D printing techniques, I proudly present my latest creation. After numerous prototypes, your printer should be able to produce this toothpick dispenser without any post-processing or assembly.&nbsp;I hope this little gadget brings you as much joy as it did for me while developing it.&nbsp;PS: The version number is written inside. I look forward to your feedback and suggestions for improvement.Updates will follow...&nbsp;***********************&nbsp;Mechanischer Zahnstocher Spender – Einteiler, keine Stützen, keine Montage, keine Nachbearbeitung.&nbsp;Ich liebe mechanische «Print-In-Place» Modelle. Und manchmal mag ich es, wenn ich nach dem Druck etwas zusammen klicken oder schrauben kann.Aber warum sollte das nicht mein 3D Drucker machen, wenn er das doch viel besser als ich kann…Inspiriert von verschiedenen Modellen und 3D-Druck Techniken präsentiere ich nun meine neueste Kreation. Nach zahlreichen Prototypen sollte nun auch dein Drucker diesen Zahnstocher Spender ohne Nachbearbeitung und zusammen friemeln ausspucken.&nbsp;Ich hoffe dieses kleine Gadget bereitet euch genau so viel Freude wie mir beim Entwickeln.&nbsp;PS: Im Inneren ist die Versionsnummer angeschrieben. Ich freue mich auf euren Feedback und Verbesserungsvorschläge.Updates werden folgen…

Toothpick Dispenser - Print in Place - No Supports

Bucatarie

OldSalty3D

Just little replacement feet/pads for the bottom of the Bambu Labs Wireless Mouse Kit (<a target="_blank" href="https://makerworld.com/en/models/13716#profileId-20115" rel="nofollow noopener">Wireless Mouse 002 by Bambu Lab - MakerWorld</a>). The kit comes with 4 adhesive pads that are stuck to the bottom of the mouse. These are actually needed for the mouse to work.&nbsp;I wanted to print multiple shells so that I could swapped them out for a different color every now and then. These feet print in just a few minutes and can be printed in any color you like, then just glue them to the bottom of the mouse. No need to buy any more adhesive feet whenever you want to print your mouse in a different color or material.

Bambu Labs Wireless Mouse Kit Feet/Pads

Keyb

Eluded Studios

Introducing the Latte Lovers Lamp. For coffee or tea lovers alike, the lamp provides a cozy and inviting atmosphere. Utilizing the Bambu Lab LED Lamp Kit paired with Bambu Lab's Jade White PLA Basic creates a warm glow to illuminate the coffee beans and latte art. With the optional steam add on to create a unique look to the lamp. The steam pictured in my image is printed with Bambu Lab's new PETG Translucent filament. Color is Translucent Brown.&nbsp;2 options for latte art included.I am using real coffee beans in my image, but I have modeled and included a coffee bean if you wish to print some.&nbsp;If you would like to sell my models commercially, please consider joining the Patreon, I could use your support: <a target="_blank" href="https://patreon.com/EludedStudios?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;If you wish to show your support for my work in way of donations, please buy me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/eludedstudios" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Material Links:<a target="_blank" href="https://store.bambulab.com/products/led-lamp-kit-001?skr=yes" rel="nofollow noopener">LED Lamp Kit</a><a target="_blank" href="https://store.bambulab.com/products/petg-translucent?variant=41198309310579" rel="nofollow noopener">PETG Translucent Brown</a><a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">PLA Basic Jade White</a>&nbsp;Assembly:<figure class="image image_resized" style="width:60%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767355/2024-02-03_792656a8da17f8.png"></figure><figure class="image image_resized" style="width:59.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767355/2024-02-03_68442c08ce17b.png"></figure><figure class="image image_resized" style="width:60%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767355/2024-02-03_456728491da348.png"></figure>&nbsp;For steam add-on:<figure class="image image_resized" style="width:60.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767355/2024-02-03_ca64e0a9aa637.png"></figure>&nbsp;&nbsp;Recommended print settings:&nbsp;3mf file is set up object specific with below settings, but please feel free to use whatever works best for you.&nbsp;Cup: 4 wall loops - This is to avoid having visible infill (unless you want to add a certain look to the cup, would love to see how different infills look while lit up). Inner and outer brim. No supports (add supports to increase quality of handle).&nbsp;Saucer: I aligned seam to back of model to hide it.&nbsp;Steam: 0 infill, 0 bottom layers (to make hollow), 2 wall loops, added 3 layer Raft for support.

Latte Lovers Lamp

Lamp

3D Print Masters Hub

Tweezer - Set of 4<ul><li>Great tool to have.</li><li>Robust design</li><li>Good for light general work</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Tweezer - Set of 4

Tools

fletch22

Here we have a heart shaped rose for Valentines Day or any special day.&nbsp;Printed using the spiral vase mode feature in the “others” section in the slicer. If not using my profile be sure to check this box for this print to work. When finished heart is approx 80x80x60mm in size. Not sure how well it could scale and retain the ability to print in vase mode. &nbsp;I've also designed and included a simple stem that can be glued on. Nothing fancy just incase you need it.&nbsp;&nbsp;Credit for the rose design is “PrintError” on Printables.

Heart shaped rose (spiral vase mode)

Valentine

El Jeffe

Really liked the model by <a target="_blank" href="https://makerworld.com/en/u/3316073328" rel="nofollow noopener">Wojciech Kawa</a> and after printing it I noticed how much the PTFE tubes wiggle while printing. So I added a piece to try to stop a bit of the harsh movements with the PTFE tubes.

AMS Lite PTFE Protector and Numbers

AMS Lite

vali

Game Boy sticky note holder and storage box

Game Boy post it holder and organizer 

Office

Lp3d

Hello,  here you have my little fun Tic Tac Toe keychain.&nbsp;Don't forget to calibrate your filament.&nbsp;A smooth buildplate is recommended.&nbsp;After printing, the individual fields should release with a slight twist.&nbsp;&nbsp;Update 21.01.2024&nbsp;After receiving feedback, I tested different filament manufacturers. All filaments were calibrated using the same procedure.<ul><li>Bambu : OK</li><li>Extrudr : OK</li><li>Esun : Welded </li><li>Esun Matte: Ok </li><li>Overture : Welded</li><li>Sunlu: Welded</li><li>and so on……</li></ul>I tested a total of 8 different manufacturers and 24 colors.&nbsp;Apparently, the different manufacturers "shrink" differently. I have therefore uploaded 2 models for which I have increased the tolerances.<ul><li>+0.05</li><li>+0.1</li></ul>If anyone has a problem with the tight tolerances of the original model, please try a model with the increased tolerances. Of course, these models have also been tested by me with the materials.&nbsp;Thanks for your feedback, and happy printing

TicTacToe - KeyChain

Games

BuzzEye

Swap Instructions (if you do not have AMS): Start with black <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992830017755" rel="nofollow noopener">PLA Basic | Bambu Lab EU</a> At layer #6 (1.20mm) swap to Red <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992829952219" rel="nofollow noopener">PLA Basic | Bambu Lab EU</a>At layer #9 (1.80mm) swap to Pink <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=46892985745756" rel="nofollow noopener">PLA Basic | Bambu Lab EU</a>At layer #12 (2.40mm) swap to White <a target="_blank" href="https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=43992829919451" rel="nofollow noopener">PLA Basic | Bambu Lab EU</a>&nbsp;You can scale up and down but only X and Y. Z axis must remain the same as original

Japanese Nature Landscape Hueforge

Tablou

3DPrintable.art

<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>Adorable articulated teddy bear, perfect for a toy, a gift or a decorative item. This bear can stand up and sit down, and its arms and head can move. &nbsp;Works well in single or multi-color prints. Be creative and share your results!&nbsp;Don't be scared but printing this model will require supports:<figure class="table" style="width:95.8%;"><table class="ck-table-resized" style="border:0px solid hsl(0, 0%, 100%);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2023-12-30_3820f9457a368.jpg"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">An example of a finished print with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border-style:solid;border-width:0px;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously. &nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border-style:solid;border-width:0px;"><figure class="image image_resized" style="width:80.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-02_0dbb0bcdbe4e8.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid hsl(0, 0%, 100%);"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:80.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_1ecd40b55155e.png"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Articulated Teddy Bear (print-in-place)

Pupets

Encrust3d

This is a case I made for the V1 and V2 apple air pods. This case may be a tight fit on your air pods, but it is to ensure your air pods do not fall out of the case and to make sure the lid does not fall off. V2 air pods are more snug than V1 air pods. If you are having a hard time removing your air pods from this case, you can use the charger to push the air pods out of the case from the bottom. I have uploaded two versions, one with a logo and one without. I would suggest turning off your AUX fan to prevent any warping that may occur. I have found normal supports to be the best supports to use for this case and both the lid and the top should be upside down when printing. Please do not sell my designs.&nbsp;If you would like a Gameboy Airpods case you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136257#profileId-148217" rel="nofollow noopener">https://makerworld.com/en/models/136257#profileId-148217</a>If you would like an Adventure Time BMO Airpods case, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136265#profileId-148228" rel="nofollow noopener">https://makerworld.com/en/models/136265#profileId-148228</a>